LakeShore Cryotonics EM7-HV Magnet with Control Unit

This system was decommissioned and removed from a university laboratory where it was surplus to requirements.

While the units have not been powered on, the previous owner has stated they were working prior to removal.

The system is in very good cosmetic condition.

Includes:

• LakeShore Cryotonics EM7-HV Magnet S/N- 651-514  REV A -1567
• LakeShore Model 648 Electromagnet Power Supply (serial number not available)
• Spare parts and adapters

Agilent 7890A GC System with 5975C Inert MSD

This system was removed from a facility where it was surplus to requirements.

Both units are in good cosmetic condition and power on. We are unable to test them further at our facility.

Included Components:

Agilent 7890A Gas Chromatograph

• Serial Number: CN10752077

Agilent 5975C Inert Mass Selective Detector (MSD)

• Serial Number: US74828029

LakeShore Cryotonics EM7-HV Magnet with Control Unit

This system was decommissioned and removed from a university laboratory where it was surplus to requirements.

While the units have not been powered on, the previous owner has stated they were working prior to removal.

The system is in very good cosmetic condition.

Includes:

• LakeShore Cryotonics EM7-HV Magnet S/N- 651-514A REV A -1564
• LakeShore Model 648 Electromagnet Power Supply (serial number not available)
• Spare parts and adapters

Yokogawa Cell Voyager CV1000 System w/ PC & Software Lab

This system was removed from a university lab where it was surplus to requirements.

All units that form the system are in good cosmetic condition and powered up.

The system appears to be in full working order, we were able to obtain a live feed from the camera - See end of the slideshow.

The PC Has the following software installed:

CV1000 Software 1.06.06

With the use of the software we can control the following on the Main unit:

Open/Close Tray

Adjust Temperature

Adjust Plate Configuration

Change Objective

Adjust Camera Position

Included are;

Yokogawa Cell Voyager CV1000

Model: CV1000-D0-EH-L31-M301-E-J

Serial#: 95M400006

Yokogawa Cell Voyager CV1000 Utility Box

Model: CV1000-D0-EH-L31-M301-E-J

Serial#: 95M400012

PC Set Up.

Dell Flat Panel Monitor P2719H

Serial#: CN-09PR6R-WS200-89C-367S-A01

Dell Precision T1700 PC

Serial#: F2VM202

Dell Keyboard & Mouse

PC Has the following software installed:

CV1000 Software 1.06.06

Objectives in main unit:

UPLSApo10x2

UPLSApo20x

UPLSApo20x0

UPLFLN40x0

UPLSApo40x2

UPLSApo60x0

Applied Biosystems MDS SCIEX 3200 Q TRAP LC/MS/MS System with Peak Scientific Nitrogen Generator

This system was removed from a university lab where it was surplus to requirements.

The system is in very good cosmetic condition. It powered on, with the 3200 Q Trap and nitrogen generator functioning as expected. The Varian vacuum pump is also in good working order, no further testing was carried out.

The previous client stated that this system was in full working order prior to removal.

The system comprises:

• Applied Biosystems MDS SCIEX 3200 Q TRAP LC/MS/MS
• Assembly No.: 1007440
• Serial No.: AF012360607

• Peak Scientific Instruments Nitrogen Generator
• Model No.: NM20ZA
• Serial No.: J06-06-06
• Running hours: 13,096

• Varian DS602 Vacuum Pump
• Model: 949-9335S001
• Serial No.: 238954
• Fitted with oil mist filter EMF20 Code A46229000

• 2 x Sciex power supply units (Assembly No. 014179, Serial Nos. 15470210, 120985175)
• 2 x Honeywell 9" black and white monitors (Model HMM9, Serial Nos. H321000214, H321000065)

• Lenovo MS PRO PC
• Type 2561
• Serial No.: ES10392192
• Loaded with Applied Biosystems Analyst v1.4.2, National Instruments Measurement & Automation Explorer v4.2.1, Chromeleon 6.8, and 3200 QTrap software

• Dell Monitor
• Serial No.: CN-OUW191-71618-812-ALAB

• Lenovo wireless keyboard and mouse
• Serial No.: 201209008012

Included Manuals:

• 3200 QTRAP Tuning, Calibrating, and Optimising Guide
• Analyst Software Tutorial
• API Safety Practice Manual

Additional accessories:

• 1 x MonoSpray II assembly (Part No. 1014666, Serial No. 010158072606)
• 4 x brackets (Part No. 016159A)
• 4 x 16mm plastic tubing Y-connectors (Part No. 419-7271)
• 60 x swabs (approx)
• 8 x mixed packets of small O-rings and micro bore tube end connectors
• 5 x Pico Tip Emitters (Stock No. FS150-20-10-D-S)
• 1 x SGE Analytical 500nl syringe
• 1 x Pressure Sensor MPL-503
• 7 x Pico Tips (Nos. 027459, 025388, 025388, 025392 [x4])
• 3 x plastic hose coils for nitrogen
• 1 x 10-litre Nalgene bottle with 3-port top
• 1 x 5-litre Nalgene bottle with SVC pressure valve (Part No. LVA30-03F-C4)

MTI Corp High Temp Furnace GSL-1700X-IIII w/ EQ-VBS-M1-LD & GSL-LCD-3Z

This item is sold on behalf of a client where it will be removed from a University Lab where it is surplus to requirements.

This system is New and Unused.

Includes:

• High Temp Furnace GSL-1700X- III
• Gas Mixing System GSL-LCD-3Z
• Vacuum Station EQ-VBS-M1-LD
• Various User Manuals

It is available for collection from Bath, UK.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

GE Healthcare / Cytiva S-2000 Sefia Cell Processing Unit Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers up, we are unable to test it further at our facility.

Working when previously in use, password protected by Cytiva so cannot be tested by ourselves, reset through Cytiva will be required by next user, this cannot be done pre-sale as it will form part of the servicing contract agreement. Cytiva are happy to do this post-sale.

Last calibration 12.01.23

GE Healthcare / Cytiva S-2000 Sefia Cell Processing Unit Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers up, we are unable to test it further at our facility.

Working when previously in use, password protected by Cytiva so cannot be tested by ourselves, reset through Cytiva will be required by next user, this cannot be done pre-sale as it will form part of the servicing contract agreement. Cytiva are happy to do this post-sale.

Hamilton Microlab STARlet Liquid Handler

CO-RE 96

This system was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition. We were unable to test it further at our facility.

Please note: There is no PC included.

Includes:

• CO-RE Tips:
• 10x 1920 Tips Clear Stacked (50 µL) Without Filters
• 9x 1920 Standard Volume Tips Clear Stacked (300 µL) Without Filters
• 21x 480 High Volume Tips (1000 µL) Without Filters
• 10x 480 Standard Volume Tips (300 µL) Without Filters
• 1x 1000 µL Rack of Tips left in the machine
• Manuals:
• 1x Programmers’ Manual
• 1x Service Records / Declaration of Conformity / Maintenance Records
• Software:
• Hamilton Robotics Microlab STAR – Venus One – Base Package 4.2
• Hamilton Robotics Microlab STAR – Venus One – Service Pack 2
• Windows Vista Home Premium 64BIT SP1 DVD
• DELL Cyberlink PowerDVD DX 8.2 Software DVD
• DELL Inspiron and Dell Studio Laptop Computer Software DVD
• McAfee Security Centre Installation CD
• DELL Microsoft Works 9.0 and Microsoft Home & Student 2007 Trial
• Other:
• 13x Unbranded Microplate Reservoir
• Stainless Steel Tip Waste / Eject Chute Bracket (mounting plate)
• Smoked Plexiglass / Acrylic Waste Chute Cover / Slide
• Circular Deck Mounting / Alignment Ring (with brass inserts)

LakeShore Cryotonics EM7-HV Magnet with Control Unit

This system was decommissioned and removed from a university laboratory where it was surplus to requirements.

While the units have not been powered on, the previous owner has stated they were working prior to removal.

The system is in very good cosmetic condition.

Includes:

• LakeShore Cryotonics EM7-HV Magnet (S/N: 651-514A, REV A -1563)
• LakeShore Model 648 Electromagnet Power Supply (serial number not available)
• Spare parts and adapters

Zeiss Axiovert 200M Confocal Microscope System with LSM510 META & Multi-Laser Setup

This system was removed from a university laboratory where it was surplus to requirements.

The previous owner confirmed it was in good working condition prior to removal.

The microscope connects to the PC and communicates successfully. The Meta software displays CAN errors on startup, which appear to be due to the lasers not being connected. Further testing was not possible without the lasers, but all indications suggest the system is otherwise functioning as intended.

The system is in good used cosmetic condition with typical signs of general use. It includes a comprehensive confocal setup featuring multiple laser modules, incubation controls, computing equipment, and imaging software.

The system comprises the following:

Zeiss Axiovert 200M Confocal Microscope, fitted with:

• Zeiss Plan-NEOFLUAR 20x/0.50.
• Zeiss Plan-NEOFLUAR 10x/0.30 ∞/0.17
• Zeiss 1095-490 Switching Mirror
• Zeiss 1058-431 Light Channel
• Zeiss 1039-685 HAL100 Halogen Lamp
• Zeiss 1007-980 HBO100 Mercury Lamp
• Zeiss 1005-847 LD Condenser 0.55 H, Ph1, Ph2, Ph3, DIC II, DIC III
• Zeiss 1005-834 Mechanical Stage
• Zeiss 1005-827 Binocular Tube 45º/23
• 2 x Zeiss 1016-758 W-PI 10x/23 Eyepieces

Laser Scanning & Illumination Components:

• Zeiss LSM510 META Module
• Carl Zeiss LSM 5 Laser Module 1018-382, including:
• Coherent Enterprise II Laser with ENTCII-653 Controller (October 1997)
• Coherent LASERPURE 5 LP-5I Cooling System with hoses
• Lasos LGK 7812 ML4
• Lasos LGK 7628-1 (October 2005)
• Lasos LGK 7786 P (March 2010)
• Lasos LGN3000 PSU
• Zeiss AIM-System 2101000343 ECU
• ebq100 Power Supply Unit

Environmental Control:

• Solent Scientific Incubation Chamber
• Solent Scientific Heater & Controller

Computing & Software:

• Fujitsu Siemens Celsius 600 PC (Windows 2000, passwords removed), with:
• Carl Zeiss AxioSet
• Carl Zeiss AIM – LSM510 Version 3.2SP2
• HP Compaq DC7600 PC (no key software or PCI cards)
• 2 x NEC monitors, mouse, and keyboard
• Manuals and software for most components

Additional:

• Various connection cables
• Small equipment table (included)

Amersham Typhoon 9410 Variable Mode Imager w/ Blue Laser Module

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition.

The Typhoon 9410 has not been powered on due to limitations with testing Class III+ Lasers at our facility.

The previous owner stated it was in good working order when it was last in use.

Included;

• Typhoon 9410
• Typhoon Blue Laser Module
• Amersham Biosciences Image Eraser
• 2x Phosphor Screens
• 3x Boxes of Manuals/Software Keys

Leica TCS SP5 Confocal Microscope System

This item is sold on behalf of a university client where it is surplus to requirements.

This Leica TCS SP5 Confocal Microscope System is reported by the client to be in complete working order, and in good cosmetic condition.

The system comprises the following:

Leica TCS SP5 Confocal Microscope main system

Objective lenses:

• 5×
• 20×
• 40× oil immersion
• 63× oil immersion

PC tower with original Leica control and imaging software installed

The system was last serviced in October 2023 and was covered under a Leica Standard Care – Basic Contract, including preventative maintenance.

The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.

Malvern Instruments Bohlin Gemini Rheometer System w/ PC & Software Lab

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

It was serviced in 2018.

The system consists of:

• 1 x Dell Optiplex 360 PC with keyboard, monitor & mouse. Running windows 7. Gemini 2000 Software
• 1 x Bohlin Gemini Rheometer.
• 2 x Fluid Containers.
• 1 x PNEUDRI MiDAS Desiccant Air Dryer.
• 1 x Jun-Air 1912001 Compressor (does seem to be leaking oil, probably needs new seals).
• 1 x Jun-Air Filter
• 1 x Parker Manifold/Gauge.

Also includes various tubing and cables.

Monmouth Scientific Aluminium Modular Cleanroom 8000mm X 4000mm X 2350mm

This cleanroom was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

ISO Class 7 (FED 10,000) Footprint: 8000mm X 4000mm X 2350mm Atrium: 2000mm X 2000mm X 2350mm

This clean room includes a fitted air filtration system.

Sirah Cobra Stretch Dye Laser CSTR-LG-24 Lab

This system was removed from a facility where it was surplus to requirement.

The unit is in good cosmetic condition. Due to safety restrictions on testing Class 3 and above lasers at our facility, it has not been powered on.

According to the previous owner, it was fully operational as of 2022 (when the previous occupier retired).

Please note; The lid struts are broken so the lid does not stay open on its own. There is also a cover/panel that has come loose from either inside or outside of the machine, however it is not clear where this has come from.

The previous owner had attached a paper sign to the laser stating: “DO NOT UPGRADE WINDOWS! This will cause the grating arm to fail and the monochromator will require repair and calibration.”

Zheda Dixun DX-Reader Protein Chip Reader REF DX-C1

This item was removed from a facility where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

Taylor-Wharton LABS-40K Liquid Nitrogen Cryogenic Storage Tank

This item was removed from a facility where it was surplus to requirement.

It is in excellent cosmetic condition, and remains untested.

The previous owner stated it is in working order.

Dimensions;

• External length (cm) 125
• External width (cm)117
• External height (cm) 144

• 417 kg

Leica DMi8 Flourescent Microsope w/ CTR Advanced, LED8, DFC9000 GTC & Nexus

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and successfully communicates with the PC & Software, we are unable to test it further at our facility.

The previous owner stated it was in good working order prior to removal.

System includes:



• Leica DMi8 Automated (S/N: 531868, Manufactured: 04/2021)
• Scanning Stage (S/N: 530999, Manufactured: 04/2021)
• Leica DFC9000 GTC Camera (S/N: VSC-13053)
• THORLABS Nexus Model B4560A Breadboard
• Leica Smart Move Controller (S/N; 497753, Manufactured: 05/2020)
• Leica CTR Advanced (Stand: 11889113, S/N: 531868, Base S/N: 498310, Manufactured: 03/2021)
• Lumencor Accessory 11504257 (S/N: P6339)
• Lumencor Light Engine LED8 11504256 (S/N: 23755)

Eyepieces and Objectives:

• 2x HC PLAN s 10x/22 M Eyepieces (P/N: 507820)
• ∞/0.17/0FN25/D PL FLUOTAR 10x/0.32
• HC PL FLUOTAR L 20x/0.40 CORR
• ∞/-/0FN25/B HC FL PLAN 5X/0.12

Leybold Univex 450 Electron Beam Evaporator System w/ Control Unit Lab

This system was removed from a facility where it was surplus to requirement.

It is in reasonably good cosmetic condition, we are unable to test it at our facility.

The previous owner advised that the system was in working order prior to decommissioning; however, it will require some work to return it to operational condition.

Please note the following cosmetic condition points:

Front/side panel unstable: one panel is missing a screw (not available), so it does not secure properly.

Rear panel: cannot be refitted due to cables/wiring protruding.

Chamber support/leg: insecure and wobbly/unstable (appears to be held with an elastic band).

The system comprises;

• Leybold Univex 450 Electron Beam Evaporator System
• Leybold Control Unit
• Klockner-Moeller power unit

Sciencetech 9150 High Resolution Monochromator Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Thermo TSQ Quantum Access Max Mass Spectrometer Lab

This system was removed from a university where it was surplus to requirement.

It powers on and is in good cosmetic condition.

The previous owner stated it was in working order when last used, however, it has been in storage for several years.

TECAN Customised Freedom EVO-2 HSM2 Liquid Handling Robot

This system was removed from a facility where it was surplus to requirement.

The Freedom EVO-2 and HSM2.0 module have both been powered on; however further functional testing was not possible as no PC was available to connect and control the system.

Includes:

• Customised Tecan Freedom EVO-2
• HSM2.0 Module and Power Supply (+ cable)
• Weighted stand for HSM2.0 module
• 4 x waste/liquid containers
• Bracket for holding containers (left side)
• Ergotron keyboard and monitor stand (right side)
• 1 x well plate stand
• Disposing system
• Barcode scanner (inside, back left)
• Various tubing throughout
• Box of spares
• Instrument Software Version 7.2
• Operating manual

Dimensions;

• External length (cm) 78
• External width (cm) 107
• External height (cm) 166

Leica DMi8 Inverted Microscope System

This item was removed from a university laboratory where it was surplus to requirements.

The microscope is in very good used cosmetic condition, with various marks and signs of general use. All functions operate as they should. The camera has not been tested as no cables or software are available.

The system comprises the following:

• Leica DMi8 Inverted Microscope with tiltable transmitted light arm
• Marzhauser 31-12-0000 stage
• Leica S40/0.40 with manually movable condenser head 11525374
• Leica 0.55 S 28 condenser head lens 505234
• Leica TL LED lamp 11525101
• Leica C-Mount 0.70x
• Leica DFC3000 G camera 11547005
• Leica manual external fluorescence axis 11889051
• Leica fluorescence protection shield 11525114
• Leica EL6000 external light source for fluorescence excitation with liquid light guide
• 2 x Leica HC Plan 10x/22 eyepieces 507820

Fitted objectives:

• Leica ∞/-/OFN25 HI PLAN 4x/0.10 PH0
• Leica ∞/-/OFN25/B N PLAN 10x/0.25 PH1
• Leica ∞/1.0/OFN25/C N PLAN L 20x/0.35 PH1
• Leica ∞/0-2/OFN25/C N PLAN L 40x/0.55 CORR PH2
• Leica ∞/-/OFN22/D N PLAN 100x/1.25 OIL PH3

The lab confirmed it was in good working order prior to removal.

S plus B Custom Chemical Delivery Gantry System Petrochemical Gasses

This system is being sold on behalf of a client where it is surplus to requirement.

The custom-built S plus B gantry was originally designed for the delivery of petrochemical gases from a wall-mounted cylinder rack to a series of modular desks. The system features a precision-engineered overhead gantry with multiple stainless steel lines and a collection of high-quality, unused valves and fittings.

It was installed but never used, remaining in pristine condition.

Includes:

• Overhead gantry system
• Stainless steel piping and valve assembly

Please note, the normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.

PerkinElmer EnVision 2104 Multilabel Reader (Model No. 2104-0020)

This system was removed from a laboratory where it was surplus to requirements.

Due to limitations with testing Class 3+ lasers at our facility, we were unable to carry out full functionality testing on the EnVision instrument and therefore it has not been powered on or tested by us.

However, the supplied PC system is  fully operational and has been verified to connect to the EnVision 2104, with screenshots provided showing the software running.

It is in good cosmetic condition.

Important: This unit currently has shipping bolts fitted to protect the instrument during transport. These must be removed prior to use. (Replacement bolts have been fitted using best available equivalents, as the original supplied bolts were not available.)

Please also note: The supplied RS232 comms cable must be connected to the PCI card RS232 socket, not the built-in Dell RS232 port.

Included:

• PerkinElmer EnVision 2104 Multilabel Reader (Model No. 2104-0020)
• PC System (operational and verified to connect to the EnVision 2104)
• 2 x Boxes of EnVision Optical Modules and Filters (boxes largely empty; contents unknown—filters may already be fitted to the instrument and only the -boxes remain)
• 1 x Briefcase of Luminescence Apertures
• 1 x Briefcase of Filter and Mirror Modules
• Multilabel Test Plate 2009-0020 (Exp. Date: 08/2011)

Optical Modules / Filters Included (as labelled):

FITC Label 2100-8010

• 2100-4030 (403) / 2100-5020 (102) / 2100-5120 (206)

FITC FP Label 2100-8020

• 2100-4090 (431) / 2100-5040 (104) / 2100-5140 (208) / 2100-5150 (209)

LANCE 320 Label 2100-8160

• 2100-4170 (412) / 2100-5060 (111)

Optical Modules and Filters for AlphaScreen Option

• (2102-8340)

BODIPY TMR Label 2100-8190

• 2100-4120 (405) / 2100-5050 (105) / 2100-5530 (229)

Manuals Included:

• EnVision Reference Manual
• EnVision Instrument Manual
• A Practical Guide to Working with AlphaScreen
• User’s Guide WorkOut 2.5

Roche cobas e 411 Automated Analyser (Disk System) with Stand

This item was removed from a facility where it was surplus to requirements.

It is in very good cosmetic condition, with only a few scuffs to the corners of the main unit and on the top of the shelving unit underneath.

All parts of the system power on.

A video of the system in operation are available on request.

The previous owner stated it was in working order prior to removal.

Included Components:

Roche cobas e 411 Automated Analyser (Disk System)

Cabinet / stand

OKI B412 printer

Includes 2x installation disks

P/N: N22500B 02

S/N: BW22025014

Powervar Uninterruptable Power Supply ABCE1442-22

P/N: 51144-03R

S/N: 5114403R-2340047

Open bag of 250 Roche cobas sample cups

Beckman Coulter SCIEX PA800 PLUS Biologics Analysis System Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Beckman Coulter SCIEX PA800 PLUS Biologics Analysis System

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on and is in good cosmetic condition.

The previous owner has stated that the unit has had little use. Please note that the PC is not included.

A video of the unit operating is available on request.

Includes:

• 10 x Pre-Assembled Capillary Cartridges (used)
• 1 x Pre-Assembled Capillary Cartridge (new)
• User manual,

Model: SCIEX PA800 PLUS

Typhoon 9400 Variable Mode Imager with Blue Laser Module Lab

This system was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it at our facility due to limitations with testing Class III+ Lasers.

THERMO Scientific Cellomics ArrayScan VTI HCS Reader

This was removed from a university lab where it was surplus to requirements.

Everything powers up but has not been tested further at our facility.

It is in good cosmetic condition with minor marks.

Included with it are;

1x ArrayScan Vti Live Cell module

P/N: N01-0114

M/N: 06112135

1x Carl Zeiss Fc12

M/N: FC12

S/N: 4632000797

Thermo HCS Studio Cellomics View v6.5.1 software on disc.

Software manuals:-

HCS Studio Software Client

HCS Studio - View

Calibration Verification Wizard

System Configuration Tool

Other manuals:-

Target Activation V3 BioApplication Guide

Live Module User Guide

Robot Plate Handler User Guide

ArrayScan HCS Reader Objective Installation Guide

Store 1.4.2 Standard Edition New Install User Guide

HCi MiddleWare Installation Guide

Brightfield Module User Guide

Liquid Handling Module Calibration and Testing Guide

vHCS TooBox 1.6.2 Installation Guide

Calibration Verification Wizard User Guide

ArrayScan Vti HCS Reader Administrators guide

2 x User Guide Addendum

Liquid Handling Module Users guide

HCS Applications Server Administrators Guide

Apotome Module User Guide

Agilent Technologies 7697A Headspace Sampler

This item was removed from a university laboratory where it was surplus to requirements.

It is in good condition and was able to successfully run a calibration method for both the tray and the sampler head, confirming basic functionality. No further testing has been carried out.

Operational usage statistics recorded by the system are as follows:

Run Time: 916:17:58:00 hr

Run Count: 11,020

Transfer Line Injections: 34,455

Miltenyi Biotec CliniMACS Plus Cell Separation System Lab

This system was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

Tecan Freedom EVO-2 100 Liquid Handling System with Software, Chiller & Accessories

This item was removed from a university laboratory where it was surplus to requirements.

The system is in good used cosmetic condition.It has not been powered on due to testing limitations with Class 3B laser fitted within the Datalogic DS1100 unit.

The previous owner stated the unit was in working order prior to decommissioning in March 2021, with no known faults reported at the time.

Fitted components:

• POSID-3 Replacement for Freedom EVO-2 100/X
• Datalogic DS1100 Laser Scanner

Additional equipment:

• Fryka Recirculating Chiller
• Model: DLK-402
• Serial No.: 64090-04-20
• Comes with waste bottle and system liquid bottle
• Powers on; set to minimum temperature of -10˚C, but only reached -2˚C after 4 hours of operation

Software (supplied on USB):

• Freedom EVOware V2.8
• Te-Chrom Wizard V1.1
• Instrument V8.0
• Freedom EVO Operating Manual
• Note: Additional software copies were included with ITEM-46820

Spare parts:

• 1 × Boxed Tecan Rack Strip 16 Pos Tube 16mm
• 24 × Rack Strip 16 Pos Tube 16mm (loose)
• Tecan Option Waste for Nested LIHA DITI Silver

Consumables:

• 10 × Boxes Tecan 1000 µL LiHa Disposable Filter Tips (2,304 pcs total, sealed)
• 2 × Boxes Thermo Scientific ClipTip 1250 Tips (8 × 96 tips/rack, 4 packs/case, sealed)
• 1 × Box KingFisher Flex Plastic Demo Package (Qty: 7)
• 3 × Packs LiHa 10 µL Disposable Tips

Cables included:

• HDMI cable
• USB cable
• RS232 D25F/D9F
• USA lead
• Euro lead

Additional accessories:

• 2 × Transport Locks
• 2 × Packs of Tubing
• Tecan Maintenance & Service Logbook Folder
• Box containing various small parts

Model: Freedom EVO-2 100

Laser Fitted: Class 3B (Datalogic DS1100)

TTP LabTech Mosquito LCP Automated Liquid Handling

This item was removed from a university lab where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to conduct further testing at our facility.

The previous client has stated it was working order prior to removal.

Specifications:

• Model: Mosquito LCP
• Serial No.: LCP-601

Leica DMI6000CS Microscope System

This item was removed from a university laboratory where it was surplus to requirements.

It is in good used cosmetic condition with signs of general use.

The microscope was tested using a borrowed CTR6000 and was found to be functioning as expected. It will require a CTR6000 and additional components to become a fully operational system.

Includes:

• Leica DMI6000CS Microscope, fitted with:
• 2 x Leica 507808 HC PLAN S 10X/25 M eyepieces
• 1 x Leica 156504141 motorised stage
• 1 x adjustable slide holder
• 1 x microplate holder
• 1 x XY cable for connection to the CTR6000
• 1 x Leica 11504103 12V 100W halogen lamp
• 1 x Leica 11505180 XY & Z Controller

This item is new in stock. Please enquire for further details.

Perkin Elmer Victor Nivo Multimode Plate Reader Lab

This item is sold on behalf of a client where it is surplus to requirements.

It is in good cosmetic condition and in good working order, having passed a test plate in July 2025.

The unit was purchased new in 2019, with preventative services carried out in 2020, 2022, and 2023. It was stored between February 2024 and June 2025 before being retested.

Includes:

• TP link for IP-based operation (compatible with phone and computer)
• Open-source software available online
• 12 filters: 260/10nm, 280/10nm, 405/10nm, 450/10nm, 480/30nm, 530/30nm, 580/20nm, 595/10nm, 615/8nm, 625/30nm, 700nm IR Blocker, Unfiltered LUM
• Test plate

The seller can package the system for transport, and the instrument has a transport mode to protect internal components.

The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.

Homogenising Systems Ltd Stansted 'Pressure Cell' Homogeniser Model: FPG12805

This system was removed from a facility where it was surplus to requirements.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Please note: During testing the "Fault/Tell Tale" illuminated, however, this is likely cause by it requiring oil for operation.

The previous owner stated it was in working order prior to removal.

This Perkin Elmer Envision 2103 Plate Reader Multilabel Plate Reader is being sold on behalf of a client. It is surplus to requirements.

The Perkin Elmer 2103 Plate Reader Multilabel Plate Reader is a fast, sensitive, and versatile benchtop reader that delivers optimized performance. It's a dynamic filter-based reader for Multi-label reads.

Included with it are;

Read technologies.           Time-Resolved Fluorescence

                                               Fluorimeter Top and Bottom

                                               Luminescence

                                               US Luminescence

                                               Fluorescence Polarisation

                                               Absorbance

                                               Alpha Screen

Stacker

Barcode readers

Windows 10 PC

3 months UK warranty

It is fully refurbished and calibrated to factory specifications.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.



PerkinElmer NexION 300Q ICP-MS with S10 Autosampler, WhisperCool Chiller & SV40BI Pump

This system is being sold on behalf of a client and is surplus to requirements.

It is in good working order and in good cosmetic condition. Purchased in 2013 and used intermittently for trace metal analysis of pharmaceutical excipients.

Service and preventative maintenance were carried out annually by PerkinElmer (most recently in October 2023), with routine performance verification and calibration completed regularly. Decommissioned in August 2025 due to low usage and end-of-service life.

Included Equipment;

• PerkinElmer NexION 300Q ICP-MS
• PerkinElmer S10 Autosampler
• PolyScience WhisperCool refrigerated chiller
• Sogevac SV40BI rotary vane pump

Included Spares and Accessories:

• 2 × Glass Type-C nebulizers
• Nickel sampler cone
• Nickel skimmer cone
• PerkinElmer demountable quartz torch
• Exhaust filter
• 2 × Air filters
• Spare tubing
• Miscellaneous small components

Please note; Instrument PC and software licence are not included.

The seller can shrink-wrap and palletise the equipment and move it to their goods-in area to assist with collection.

Collection is available from Dartford, UK.

Normal terms and conditions do not apply to this item, which is non-returnable and non-refundable.

Lonza 4D-Nucleofactor Electroporation System Core & X Units Lab

This system was removed from a facility where it was surplus to requirement.

Both units are in very good cosmetic condition and power on. The previous owner stated it was in good working order prior to removal.

The system includes;

• Lonza 4D-Nucleofactor Core Unit
• Lonza 4D-Nucleofactor X Unit

Bruker Skyscan 1178 In Vivo Micro CT Fast X-RAY Microtomograph

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition, we are unable to test it further due to limitations at our facility.

According to information provided by the previous owner, the unit was last used approximately eight or more years ago. There were no known faults at the time of last use, however it is likely due to the extended period of inactivity, the x-ray tube may no longer be functional and may require replacement. We are unable to confirm this.

Disclaimer; Users should seek technical expertise before attempting to power on, as inactive tubes may present a risk of cracking due to uneven heating.

Includes:

• Manual

Max Sample Dimensions;

• 80mm diameter x 200mm height.

Olympus IX-70 // Fluoview FV-500 Confocal Microscope System

This system was removed from a university laboratory where it was surplus to requirements.

The system powers on, and the basic microscope functions have been tested successfully. All optical and mechanical components appear to operate as expected, with the system in good overall cosmetic condition, showing signs of general use. Full FV500 operation will require a compatible PC running the appropriate control software.

The system consists of:

Olympus IX-70 Inverted Microscope fitted with:

• Olympus IX-ILL 100 LH Transmitted Illumination Column
• Olympus IX-LWPO Polarizer
• Olympus IX-LWUCD Phase/DIC Condenser
• Olympus IX-SFR Mechanical Stage
• Olympus 6 Position Nosepiece
• Olympus FV5-DICT DIC Slider
• Olympus IX-AN Analyzer
• Olympus IX-RFAC Cube Turret fitted with 3 filter cubes:
• Olympus U-MNIBA2
• Olympus U-MWG2
• U-N41024 CY5 LP
• Olympus U-BI90 Binocular Tube 90
• Olympus WH10X-H/22 Eyepiece (appears to be missing outer ring)
• Olympus WH10X/22 Eyepiece
• Olympus Liquid Light Guide with LG-PS2 and FV5-TD
• Olympus U-ULS100HG Mercury/Fluorescence Lamp with U-RFL-T Power Supply
• Olympus FV5-74-2 Fluoview FV500 Controller (working condition unknown)
• Olympus FV5-ZM Scanning Head

Included Objectives:

• Olympus UPlanApo 10x/0.40 ∞/0.17
• Olympus UPlanApo 20x/0.70 ∞/0.17
• Olympus UPlanApo 40x/0.90 WLSM ∞/0.17
• Olympus UPlanApo 60x/1.40 Oil ∞/0.17
• Olympus UPlanApo 100x/1.35 Oil Iris ∞/0.17