All Products

Perkin Elmer Clarus 580 Gas Chromatograph w/ TurboMatrix 40 Headspace Sampler

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Accessories included:

• 2 x Chrompack Capillary Columns
• 2 x Rtx-5MS
• 4 x DB-WAX 15m 1.0µm Thickness
• 1 x DB624 30w 1.8µm Thickness
• 1 x PhaseSep 20M 10mtr 0.32mmid 0.4µm (Wooden Box)

JEOL Neoscope JCM-5000 Scanning Electron Microscope (SEM)

This system was removed from a university laboratory where it was surplus to requirements.

The unit powers on successfully, and all components appear complete and in good overall condition.

Please note: we have not been able to test the system further, as the required PC and software are not included.

According to the previous owner, the SEM was fully operational prior to removal. However, the Deben Coolstage had not been used for some time, and its current functionality is therefore unverified.

Included Components:

• Deben Coolstage with specimen block, holder, and controller
• Oil vacuum pump
• Deben JCM-5000
• Deben Chamberscope power supply
• JCM-5000 Digest Operation Manual
• Coolstage Specimen Cooling Unit Operation Manual (LT3.05)
• Original manufacturer binder (2009) containing instructions

Polaron Plasma Barrel Etcher - PT7160 Lab

This item was removed from a facility where it was surplus to requirement.

It powers on, we are unable to test it further at our facility.

Teledyne Lecroy Wave Runner 640Zi, 4GHz Oscilloscope 40GS

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, the next calibration was due in October 2025.

Includes;

• QWERTY Keyboard (USB)
• Protective Screen Cover
• PP022-1 & PP022-2 Passive Probes (With Manuals)
• PVM-5 Cable (50ft)

Teledyne ISCO Combiflash Torrent UV Flash Chromatography System Lab

This system was removed from a facility where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

Please note; This sale does not include the Fractionation valve, Fraction collector or the Solvent valve.

The previous owner stated it was in working order prior to removal.

AID iSpot ELR08IFL with AID Fluorescent Lamp

This item was removed from a facility where it was surplus to requirement.

The iSpot unit powers on via an in-house 24V PSU (not included). The accompanying AID Fluorescent Lamp powers on via a standard IEC cable.

The lamp's run-time counter displays 0-00, which is likely due to a reset. A light pipe connects the main unit to the lamp, and USB and comms cables are fitted to the rear, indicating that a PC connection may be required for full operation.

Both units are in reasonable, used cosmetic condition.

Includes:

• AID iSpot ELR08IFL Unit
• AID Fluorescent Lamp (UV Light Source)
• Light Pipe
• USB and Comms Cables

Continuum Surelite SLI-10 High Energy Nd:YAG Laser w/ Power Supply

This system was removed from a facility where it was surplus to requirement.

The unit is in good cosmetic condition. Due to safety restrictions on testing Class 3 and above lasers at our facility, it has not been powered on.

The power supply was powered on and PAT during listing.

The previous owner stated it was in good working order prior to removal.

Continuum Surelite Nd:YAG I SLI-10 High Energy Laser & Power Supply

This system was removed from a facility where it was surplus to requirement.

Due to safety restrictions on testing Class 3 and above lasers at our facility, the laser has not been powered on. However, the power supply has been powered on and has passed PAT testing.

It is in good cosmetic condition.

The previous owner stated it was in working order prior to removal.

Tuttnauer 5075ELV 5075ELVCG-D Autoclave Steam Sterilizer (2020)

This item was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 15/10/24

Peak Scientific Genius SQ 24 Nitrogen Generator

This item was removed from a facility where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner stated it was in working order prior to removal.

Metrohm Liquid Handling System with 872 Extension Module, 774 Oven Sample Processor, and Additional Components

This item was removed from a university laboratory where it was surplus to requirements.

The system includes various Metrohm modules and accessories. Individual components have been powered on where possible, we are unable to conduct further testing as a system at our facility.

Information regarding cosmetic condition of each unit is listed below.

System Components and Condition:

Metrohm 774 Oven Sample Processor with 774 SC Controller and 728 Stirrer

• Powers on, minimal wear, and in good condition.
• The 774 SC Controller operates as intended, moving the stage without faults.
• Model: 774 Oven Sample Processor
• Type: 1.774. - 0010/08138

Metrohm 881 Compact IC Pro

• Powers on, excellent condition with no visible wear.
• Includes a Metrosep C4 250/4.0 Column and Metrohm IC Conductivity Detector.
• Model: 881 Compact IC Pro
• S/N: 1881000010121
• Type: 1.881.0010

Metrohm 812 Valve Unit

• Not powered on due to lack of compatible power lead (external power: 24VDC/2A, 5VDC/0.5A).
• Good condition with minimal wear.
• Model: 812 Valve Unit
• S/N: 1812001004135

Metrohm 705 UV Digester

• Powers on, fair condition with some wear, and a broken control dial.
• Model: 705 UV Digester
• Nr: 0N2 147
• Type: 17050017

Metrohm 872 Extension Module

• Powers on, in excellent condition with minimal wear.
• Model: 872 Extension Module
• Nr: 1872001007118

Metrohm 818 IC Pump

• Powers on, good condition with minimal wear.
• Model: 818 IC Pump
• Nr: 1818011003177

Accessories Included:

• Electrodes: (11 total; models listed below, some unreadable)
• Metrohm 6.0203.100 (pH 0...14/0...70°C, 3M KCI)
• Metrohm 6.0255.100 (pH 0...14/0...80°C, 3M KCI)
• Metrohm 6.0450.100 (Ag / 0...70°C, KNO3 sat)
• Metrohm 6.0418.100 (Ag / 0...70°C, KNO3 sat)
• Metrohm 6.0338.100 (Pt / -20...70°C)
• Metrohm 6.0252.100 (pH 0...14/0...60°C, 3M KCI)

Software:

• Mettler Toledo LabX Direct Balance Data Transfer Software
• Metrohm Metrodata A.701.0007 TiNet 2.4, Vesuv 3.0
• Metrohm Metrodata 2003 TiNet 2.5
• Fujitsu Siemens Scenicview A17-2A / A19-2A
• SCSI Card 2904
• Roxio Creator Business HD
• DMA-80 Manual
• Epson Stylus D78 Vol 1.0
• Corel WinDVD

Leica Vibratome VT1000 S Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The previous owner has notified us that it has been tested and is working, though it requires a replacement knife holder and buffer tray.

Micromass Quattro Ultima Liquid Chromatography Mass Spectrometer (LC-MS) Lab

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and in complete working order. The system was last serviced in 2019 and last used in 2022. At the time of decommissioning, there were no known faults.

Thermo Scientific TriPlus RSI System for Liquid Injection Lab

This item is sold on behalf of a client where it was surplus to requirements.

It is in complete working order and good cosmetic condition, having undergone a full service by Unity Lab Services shortly before decommissioning.

Packaged in a genuine CTC box for shipping, with domestic shipping included.

Features:

• PALbase 850 X/Y unit with PAL Control Board Series I
• PAL RSI z-head
• PALterminal
• PALpower and cables
• PAL Mounting Kit Standalone for HPLC
• LCMS-P100 Tool
• LCVMS Wash module
• Valve Drive module for VICI valve
• Injection Valve
• PAL3 Peltier Stack for 6 deepwell plates (or vial racks, racks not included)
• Voucher for new syringe for the syringe tool with two standard needles (end user can choose 100 μL, 250 μL or 500 μL)

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Protein Simple Ella Immunoassay System Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition.

The lab confirmed it was in good working order prior to removal.

Includes USB and other various parts as shown.

Agilent xCELLigence SP Real-Time Cell Analyser w/ Software Lab

This system is being sold on behalf of an operational laboratory.

It is in good cosmetic condition and in full working order.

Required software included.

It is available for collection from Dublin, Ireland.



The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Thermo Scientific Trace GC Ultra- HS TriPlus AutoSampler Gas Chromatography Lab

This system was removed from a facility where it was surplus to requirement.

Both included units are in good cosmetic condition and power on, we are unable to test them further at our facility.

System includes;

Thermo Scientific Focus GC

• Model - GC Focus Series
• S/N - 1110462

ISQ Single Quadrupole MS

• Model - ISQ - Mass Spectrometer
• S/N - ISQ130129

This is being sold on behalf of a client. It is surplus to requirements.

The MicroBeta TriLux is an instrument designed for liquid scintillation or luminescence detection of samples in microplates, tubes or on filters. This system has 12 detectors and is set up for 96/384 well plates and a 16-shelf plate-loading magazine

It has been refurbished by Factory trained Engineers to the original instrument specification.

Included with it are;

3 months UK Warranty

12 Detectors

USB upgrade

Windows 10 upgrade.

PC Monitor

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Perkin Elmer Optima 5300 DV Spectrometer ICP-OES

This system was removed from a university laboratory where it was surplus to requirement.

It is in good working order.

Lambda Physik Lasertechnik Compex 102 Class 4 Laser System – 12W (157–800 nm)

This system was removed from a university where it was surplus to requirement.

The unit is in good cosmetic condition. Due to safety restrictions on testing Class 3 and above lasers at our facility, it has not been powered on.

According to the previous owner, the system was fully operational prior to removal.

Included Components:

• Lambda Physik Control Panel – Model No. 262 353 10
• Serial No.: 0E30
• Software: CTERM 1.6
• Becker VTC 6/2 Pump – Serial No. 1465546
• Mounted on a mobile cart/trolley with gas fittings and regulators
• (Note: Gas regulators will require replacement)
• Laser power key included

Zeiss Axioplan 2/LSM 5 Pascal Confocal Laser System

This system was removed from a university laboratory where it was surplus to requirements.

The Axioplan 2 microscope has been successfully controlled via the included Pascal software.

While the laser modules have not been fully tested, the software allows toggling of the laser control.

All components are in good used cosmetic condition.

The system comprises the following:

• Zeiss Axioplan 2ie MOT microscope stand, fitted with:
• Zeiss LSM 5 Pascal VarioTwo
• HBO 100 Mercury Lamp with ebq100 power supply
• 4 x Filter Cubes: DIC, DAPI, FITC, Rhod
• 2 x Zeiss 44 40 34 Pl 10x/25 Eyepieces
• Zeiss 1067-325 Axio Mechanical Rotating Stage
• Zeiss 1159-530 Condenser
• Zeiss 1058-431 Light Channel
• Zeiss 1095-490 Switching Mirror
• HAL 100 Halogen Lamp
• 6-position nosepiece with objectives:
• Zeiss Plan-NEOFLUAR 10x/0.3 ∞/0.17
• Zeiss Plan-NEOFLUAR 20x/0.50 ∞/0.17
• Zeiss Plan-NEOFLUAR 40x/1.3 Oil ∞/0.17
• Zeiss Plan-APOCHROMAT 63x/1.4 Oil Ph3 ∞/0.17

• Zeiss LSM 5 Pascal Laser Module, including:
• Lasos LGK 7786 P 543nm Laser (June 2011) with Lasos SAN 7460A power supply
• Lasos LGK 7812 ML04 450–530nm Laser (November 2014) with Lasos LGN 7812-01 power supply

• Zeiss LSM 5 Pascal Laser Module +, including:
• Lasos LGK 7628-1 633nm Laser (May 2002) with Lasos SAN 7460A power supply

• Computer & Software:
• Fujitsu Siemens Celsius PC with Windows XP (password removed), Pascal Software installed, and serial hardware dongle
• 2 x NEC monitors, keyboard & mouse
• AxioVision software CDs

• Zeiss Pascal 5 ECU Units:
• 1 x ECU tested and working with this system
• 1 x ECU marked 'DEAD 5v' (included untested as a spare)

• Spare PC:
• Fujitsu Siemens Celsius 670 (non-booting, Windows 2000) – included for spare parts

• Other:
• Isolation table is included
• Table pictured with lasers is not included

B&W Tek BWS015 TEA001 Spectrometer with RTP-5 Reflectance Probe (x2 available)

This item is sold on behalf of a client. It is surplus to requirement.

The system is in excellent cosmetic condition and full working order. Each unit has been tested prior to listing and has approximately 200 hours total operational use. Only light cosmetic wear is present, consistent with careful laboratory use.

Includes:

• B&W Tek BWS015 TEA001 Fiber-Optic Spectrometer
• B&W Tek RTP-5 Reflectance Probe
• Connecting data/power cable

Typical specifications:

High-performance, USB-powered fiber-optic spectrometer designed for laboratory, quality control, and field-based spectral analysis. The BWS015 TEA001 features a high-sensitivity TE-cooled detector, delivering accurate and repeatable measurements across a broad spectral range, making it suitable for research and industrial measurement applications.

• Model: BWS015 TEA001
• Wavelength range: 350 – 1050 nm (typical)
• Detector: TE-cooled, high sensitivity
• Interface: USB plug-and-play PC connection
• Software: Compatible with BWSpec software

The items are available for collection from Christchurch, Dorset, UK.

Please note: The normal terms and conditions do not apply to this item. This item is non-returnable and non-refundable.

Yokogawa Cell Voyager CV1000 System w/ PC & Software Lab

This system was removed from a university lab where it was surplus to requirements.

All units that form the system are in good cosmetic condition and powered up.

The system appears to be in full working order, we were able to obtain a live feed from the camera - See end of the slideshow.

The PC Has the following software installed:

CV1000 Software 1.06.06

With the use of the software we can control the following on the Main unit:

Open/Close Tray

Adjust Temperature

Adjust Plate Configuration

Change Objective

Adjust Camera Position

Included are;

Yokogawa Cell Voyager CV1000

Model: CV1000-D0-EH-L31-M301-E-J

Serial#: 95M400006

Yokogawa Cell Voyager CV1000 Utility Box

Model: CV1000-D0-EH-L31-M301-E-J

Serial#: 95M400012

PC Set Up.

Dell Flat Panel Monitor P2719H

Serial#: CN-09PR6R-WS200-89C-367S-A01

Dell Precision T1700 PC

Serial#: F2VM202

Dell Keyboard & Mouse

PC Has the following software installed:

CV1000 Software 1.06.06

Objectives in main unit:

UPLSApo10x2

UPLSApo20x

UPLSApo20x0

UPLFLN40x0

UPLSApo40x2

UPLSApo60x0

GE Healthcare AKTAready Single-Use Chromatography FPLC System

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on, but further testing could not be conducted at our facility. It is in good cosmetic condition, showing minor marks from use.

Cytiva has recommended that a new computer and license are necessary for full functionality.

We can include the PC and software at an additional cost. Please inquire for a detailed quote if interested.

Includes a box containing the following parts:

• 1 x Pneumatic Air Supply Hose
• 1 x System Computer Cable
• 2 bags of Clamps (3 per bag)
• 2 x Sealed Packs of Tubing
• 1 x USB Cable
• 1 x Service Key
• 9 x Packs of GE PN-18-1112-51 (2 per pack)
• 1 x GE RJ45 Coupler PN-56-3274-14
• 1 x GE Cooling Collars (A+B) PN-19-7825-01
• 10 x Omnifit 2.0mm Peek Barbed Adaptors
• 5 x Omnifit Adaptor to female luer (Cat no. 002502)
• 1 x Assure Plus 3 1/4" x 6 1/2" (Cat no. 83000)

METI HPS (Human Patient Simulator) System w/ Software x 2

These systems were removed from a university where they were surplus to requirement.

The cosmetic condition of both mannequins is reasonably good overall. One mannequin is missing a hand, however the detached hand is included with the sale.

The METI HPS Lab Racks power on and appear operational. The internal modules have been checked and are reported to be functioning correctly. Please note that we have been unable to perform a full operational test of the complete METI HPS system with all associated equipment connected. As such, the systems are being sold as powered-on and partially tested.

The included BAMBI Oil-Free VTS75D Silent Air Compressor is in good cosmetic condition and powers on, however no further testing has been carried out at our facility.

Both Apple MacBooks power up and are in good working order with METI HPS6 software installed.

The instructor workstation iMac computers power on and have METI HPS6 software installed.

All cables shown within the photographs are included.

All items included with the listing:

METI HPS (Human Patient Simulator) Mannequin x 2

Model: HPS

Size: 5ft 11in

METI HPS Lab Rack x 2

Serial#1: HPS 337

Serial#2: HPS 373

Dimensions and weight:

Hx130Wx60Dx78cm 160kg

2 x Full-Functioning Monitor Interface cables

2 x NE-1000 One Channel Programmable Syringe Pump

BAMBI Oil-Free VTS75D Silent Air Compressor

Model: VTS75D

2 x Medical Isolation Transformer – IsoBox ISB-100W

Model: ISB-100W

Apple Airport Extreme

Serial#: 6F9512UGACC

Apple Airport Extreme

Serial#: HS4033XVQ4P

Instructor Workstation

Included in the workstation are the following :

iMac 8,1

iMac G5

Both iMacs have the following software installed:

METI HPS6

All cables shown in the photos are included.

Molecular Devices QPix 420 Automated Microbial Colony Picker System Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and in full working order, it was last serviced on 15/01/2025 (installation service).

Please note: There is no PC included.

Includes:

• Compressor
• Transformer
• Cleaning brushes and trays
• Imaging table
• Plate adapter for two rectangular cell plates with filter
• Plate holders for 12 plates

Typical specifications:

Automated colony picking and imaging system designed for high-throughput microbial screening and plate management. Delivers accurate and efficient colony identification, picking, and documentation for research and biomanufacturing applications.

Beckton Dickson BD FACSVerse Flow Cytometer System Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition, we are unable to power it on due to limitation with test Class 3+ lasers at our facility.

The client stated it was in working order prior to removal.

Includes;

• Bypass Assembly
• 2 x Dongles
• BD FACSVerse System Users Guide

Bioquell L3 HPV Gassing Unit Model - TD071-0000-230V Hydrogen Peroxide Vapor Lab

This item was removed from a facility where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

• Filter Counter: 1975
• Cycle Counter: 70
• Calibration Due: 28/02/2023

Accessories:

• Bioquell RS-1 (S/N: 202008RS3886)
• Comms Cable for RS-1 to Main Unit
• Several Various servicing parts (mainly the old filters/gaskets/seals that have been replaced)
• Calibration Certificate
• Large Pipes to Connect System
• Distribution Head (S/N: 202008DH3885)

Agilent 7890A GC with CTC Analytics GCPAL System

This system was removed from a facility where it was surplus to requirements.

Both units are in good cosmetic condition and power on. The screws required to secure the CTC autosampler to the top of the GC are missing. No further testing has been carried out.

Included Components:

Agilent 7890A GC System

• Serial Number: CN10752082
• Powers on.

CTC Analytics GCPAL

• Model Number: GH6502-CTC
• Serial Number: CH00161569

Consumables Included:

• Jet, Capillary Optimized, 0.29 mm ID (P/N: G1531-80560)
• FID Insulation Assembly (P/N: G1531-60700)

ttp labtech ARKTIC 3106-00216 -80˚C Automated Biobanking Storage System (spt)

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we have been unable to test it further. The compressors are working, and all user data has been removed from the software.

Software installed: Arktic version 1.9.5 (Build 12)

It is in excellent cosmetic condition with minor marks from use.

Metrohm 907 Titrando High-End Tritrator, Ti Stand, 2 x 800 Dosino w/ Software

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

This system comprises;

• Metrohm 907 Titrando
• Metrohm 804 Ti Stand
• Metrohm 800 Dosino
• Metrohm 800 Dosino
• Windows XP PC with Metrohm Software installed

Sartorius Stedim Biotech Pallet Tank for Mixing Base Module EU 200L w/ Combics 1

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

ProteinSimple Ella Automated ELISA System w/ 2 x Verification Cartridges

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service:  27/08/2024

Applied Biosystems MDS SCIEX 3200 Q TRAP LC/MS/MS System with Peak Scientific Nitrogen Generator

This system was removed from a university lab where it was surplus to requirements.

The system is in very good cosmetic condition. It powered on, with the 3200 Q Trap and nitrogen generator functioning as expected. The Varian vacuum pump is also in good working order, no further testing was carried out.

The previous client stated that this system was in full working order prior to removal.

The system comprises:

• Applied Biosystems MDS SCIEX 3200 Q TRAP LC/MS/MS
• Assembly No.: 1007440
• Serial No.: AF012360607

• Peak Scientific Instruments Nitrogen Generator
• Model No.: NM20ZA
• Serial No.: J06-06-06
• Running hours: 13,096

• Varian DS602 Vacuum Pump
• Model: 949-9335S001
• Serial No.: 238954
• Fitted with oil mist filter EMF20 Code A46229000

• 2 x Sciex power supply units (Assembly No. 014179, Serial Nos. 15470210, 120985175)
• 2 x Honeywell 9" black and white monitors (Model HMM9, Serial Nos. H321000214, H321000065)

• Lenovo MS PRO PC
• Type 2561
• Serial No.: ES10392192
• Loaded with Applied Biosystems Analyst v1.4.2, National Instruments Measurement & Automation Explorer v4.2.1, Chromeleon 6.8, and 3200 QTrap software

• Dell Monitor
• Serial No.: CN-OUW191-71618-812-ALAB

• Lenovo wireless keyboard and mouse
• Serial No.: 201209008012

Included Manuals:

• 3200 QTRAP Tuning, Calibrating, and Optimising Guide
• Analyst Software Tutorial
• API Safety Practice Manual

Additional accessories:

• 1 x MonoSpray II assembly (Part No. 1014666, Serial No. 010158072606)
• 4 x brackets (Part No. 016159A)
• 4 x 16mm plastic tubing Y-connectors (Part No. 419-7271)
• 60 x swabs (approx)
• 8 x mixed packets of small O-rings and micro bore tube end connectors
• 5 x Pico Tip Emitters (Stock No. FS150-20-10-D-S)
• 1 x SGE Analytical 500nl syringe
• 1 x Pressure Sensor MPL-503
• 7 x Pico Tips (Nos. 027459, 025388, 025388, 025392 [x4])
• 3 x plastic hose coils for nitrogen
• 1 x 10-litre Nalgene bottle with 3-port top
• 1 x 5-litre Nalgene bottle with SVC pressure valve (Part No. LVA30-03F-C4)

Zeiss Evo50 SEM W/ PCs, ATC KTD2000 Chiller, 2 x XFlash IPL SVE & Accessories

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: There are no detectors included.

The Plextor PC has:

• EM Server
• SmartSEM

The DELL PC has:

1. iMeasure 4.2, 4.2 Config, 4.3 and 5.3
2. iDiscover 4.2 SR 1 and 5.3
3. ScanTrack
4. Espirit 1.8
5. FindMin

Includes:

• Zeiss Evo50 SEM
• 2 x PC with Monitors
• 1x UPS
• ATC Kt Chiller
• Edwards RV12 Pump
• FEI Type FP 3440/52 Acoustic Enclosure
• 2 x Bruker Intellection XFlash IPL SVE Signal Processing Unit
• Table for PCs
• Various Spares/Manuals

Coherent 899-01 Ring Laser w/ Coherent 5920 Dye Circulator & Manual

This system was removed from a facility where it was surplus to requirement.

The unit is in good cosmetic condition. Due to safety restrictions on testing Class 3 and above lasers at our facility, it has not been powered on.

The power supply powers on, we are unable to test the system further.

Leco TruMac CN Elemental Determinator System w Model 630-300-300 and 630-300-800

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Sartorius Stedim Biotech BIOSTAT RM 20 Basic w/ BIOSTATB2 Control Tower

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Last service: 22/08/2025

Codex DNA BioXp 3250 DNA Synthesis System

This system is sold on behalf of a client where it is no longer required.

The equipment consists of a Codex DNA BioXp 3250 automated DNA synthesis system. The system has seen minimal use, as the research group subsequently required equipment capable of operating to a higher specification.

It is in good working order.

Please note: The instrument has not been covered by a manufacturer service contract since 2024.

The system comprises the following major components:

Main Unit

• Codex DNA BioXp 3250 automated DNA synthesis system

Accessories & Included Items

• Integrated onboard software (no separate software licences required)
• Consumable pipette tips can be included by agreement
• Accessories as shown in the photographs

The seller is unable to package the system internally due to its size and weight. The instrument originally arrived in a heavy-duty wooden crate and professional packing would need to be arranged prior to transport.

The system is available for collection from Central London, United Kingdom.

Erweka MediPrep 1622 Dissolution Tester System Lab

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Last Service: 07/10/2025

HTG EDGE-SP-010 EdgeSeq Processor System Lab

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

Please note: This system is no longer supported by the manufacturer

Thermo Scientific LTQ Orbitrap XL Hybrid Ion Mass Spec System

This system was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powered on with the pump operable. The previous owner has stated that the PC & hard drive has been removed as they had stopped working, but they reported no faults with the MS itself.

It powers up but has not been tested further.

Also included with the listing is the following;

1 x Thermo Scientific Gas Specific Triple Filter Helium

2 x LTQ Orbitrap Biotech Operations Training Course Manual

Various other unidentifiable parts - photos included.

Biosafe Sepax S-100 Cell Separation System

This item was removed from a facility where it was surplus to requirements.

It powers on and is in good cosmetic condition. No further testing has been carried out.

Please note: there is a small crack on the side of the unit, as shown in the photos.

Model: Sepax S-100

Protein Technologies Symphony Peptide Synthesiser System w/ PC & Software Lab

This system was removed from a facility where it was surplus to requirement.

It is in good working order.

PC Included:

• Dell OPTIPLEX 380
• Dell LCD Monitor
• Microsoft Keyboard and Dell Mouse
• Protein Technologies Mouse Mat

Software Installed:

• Symphony
• PTI Peptide Predictor
• HI92000 (Hanna Instruments)

Waters 3100 Mass Detector LC-MS Lab

This item was removed from a facility where it was surplus to requirement.

It powers on.

Last Service: 02/11/22

This Protein Technologies Prelude Peptide Synthesis System is being sold on behalf of a client. It is surplus to requirements.

The unit is in full working order and the software is included. The PC is built in, and controlled by the included monitor & keyboard.

The plastic section of the ducting will be retained by the Lab, the metal section coming directly from the Prelude is included.

It is in very good cosmetic condition with only minor marks from use.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.