Items 261 to 280 of 3024

Image of item

£ 3,600.00 (ex. VAT) 1 in stock

Zoneare Z.One Ultra SmartCart and Scan Engine Ultrasound System

ITEM-31731

Zoneare Z.One Ultra SmartCart and Scan Engine Ultrasound System


This was removed from a university lab where it was surplus to requirements.


The unit powers up but has not been tested because there are no transducers and probes with it.


Zoneare Z.One Ultra SmartCart and Scan Engine Ultrasound System

Part no. 85000-00

SN - 03062C308H


Zoneare Z.One Scan Engine

PN - 82001-20

SN - 03002S208H


Comes with Quick Reference Guide

Zonare Operator Manual 3.5 Part no. Q00144 3/08


Extendable height up to 152cm

Monitor folds down for storage.



Image of item

£ 3,550.00 (ex. VAT) 1 in stock

Nuaire Cellgard ES Class 2 II Biological Safety Cabinet NU-480-400E Lab

ITEM-31192

Nuaire Cellgard ES Class 2 II Biological Safety Cabinet NU-480-400E


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in working order. It is in good cosmetic condition with minor marks from use.


Cabinet dimensions - D89 W137 H150cm

Frame dimensions - D79 W118 H83cm

Internal workspace dimensions - D55 W117 H60cm




Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 3,530.00 (ex. VAT) 1 in stock

Olympus IMT-2 Microscope w/ 4 x Objectives - LWD CDPlan 40PL, 20PL, SPlan 10PL

ITEM-19883

This Olympus IMT-2 Microscope was removed from a university lab where it was surplus to requirements. The lab assured us it was in full working order when last used.


The unit has been professionally serviced and re-certified. It is in full working order.


It is in good cosmetic condition with some marks from use.


Included are 4 x objectives;

LWD CDPlan 40PL 0.60 160/0-2

LWD CDPlan 20PL 0.40 60/0-2

SPlan 10PL 0.30 160/0.17 806531

SPlan 4PL 0.13 160/- 103388

&

Eye Pieces - 2 x WHK 10X/20L-H

Stage - 338709


Image of item

£ 3,510.00 (ex. VAT) 1 in stock

PEAK Scientific Genius NM32LA Nitrogen Generator Lab

ITEM-29888

This PEAK Scientific Genius NM32LA Nitrogen Generator was removed from a university lab where it was surplus to requirements.


The unit powers up and had been serviced up to 2019. It is no longer under service, but is running.


It is in good cosmetic condition with minor marks from use.



Image of item

£ POA 1 in stock

Shimadzu RF-10AXL Spectrofluorometer Detector HPLC Lab

ITEM-30509

This item is new in stock. Please enquire for further details.

Image of item

£ 3,500.00 (ex. VAT) 1 in stock

Perkin Elmer Series II CHNS/O 2400 Analyzer Organic Element Analyser

ITEM-24639

Perkin Elmer Series II  CHNS/O 2400 Analyzer Organic Element Analyser


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good cosmetic condition. The screen works, but we were unable to test it further at our facility.



Image of item

£ 3,500.00 (ex. VAT) 1 in stock

Covaris S2 Focused Ultrasonicator with Grant LTC1 Water Bath Lab

ITEM-30312

Covaris S2 Focused Ultrasonicator with Grant LTC1 Water Bath


This was removed from a university lab where it was surplus to requirements.


Included are;


1 x Covaris S2 Focused Ultrasonicator

Model S2

Ser No. 541

The unit powers on and is in good cosmetic condition. The motor can be heard almost immediately after powering on the unit. We were unable to test it further.



1x Grant LTC1

Model R2

The unit powers on and is in good cosmetic condition.

It has been tested with a digital thermometer (not included) and is in good working order.


Image of item

£ 3,495.00 (ex. VAT) 1 in stock

2x Waters Nano LockSpray Exact Mass Ionization Sources Code No. M951748DC1

ITEM-20778

2x Waters Nano Nano LockSpray Exact Mass Ionization Sources  Code No. M951748DC1


These were removed from a university lab where they were surplus to requirements.


They are in good cosmetic condition but have marks from use.


The cables have been cut so they could not be tested.

Image of item

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 3,490.00 (ex. VAT) 1 in stock

GE IN Cell Analyser 1000 Optigrid Structured Light Imaging System Spares/Repairs

ITEM-30328

This GE IN Cell Analyser 1000 Optigrid Structured Light Imaging System was removed from a university lab where it was surplus to requirements.


Included in the system are;


1x GE IN Cell Analyzer 1000:


Dims: L85cm W70cm H70cm

The unit is in good cosmetic condition.


When connected up to the power supply we could not hear the unit power on.

Inside the unit it appears have been tampered with as there are several cables and connector cables not attached to anything the EARTH cable is also not attached. A circuit board has been removed from the unit. this may explain why we could not get the unit powered up.


1x GE IN Cell Analyser 1000 Kinetic OZ Enabled

Model No. 28-4051-29

System No. 1316043

The unit powers on and is in good cosmetic condition.

The fans are working, they can be heard powering up immediately once the unit is powered on.


1x GE IN Cell Analyser 1000 ENDPNT OZ Enabled

Model No. 28-4051-28

System No. 1358008

The unit powers on and is in good cosmetic condition. The unit appears to have been stripped only 1x HP Workstation 6200 PC and 1x MVP Series power supply were still inside it.


The Kinetic OZ Enabled unit appears to be complete with an Optigrid light imaging system. We have fitted the GE IN Cell Power supply back into the rack unit where it should be housed.


EMKA Keys:

Model 2233X

2x keys for GE IN Cell Analyser 1000 ENDPNT OZ Enabled

2x keys for the GE IN Cell Analyser Kinetic OZ Enabled

All 4 keys are in good cosmetic condition and open and lock both the Kinetic and the ENDPNT units.


We did not connect up the GE IN Cell 1000 to the GE 1000 Kinetic OZ Enabled unit as one of the communication cable connections at the back of the rack has come away and will need to be fixed back on. Without this being fixed we do not believe the systems to be aware of each other.


1x Optigrid Light Imaging System:

Model QIOPTIQ

The unit powers on and is in good cosmetic condition.


1x Xenon ARC Lamp Power supply w 2x keys:

Type 6

Part No. 56409187

The unit powers on and is in good cosmetic condition. The keys do not fit in the barrel well and do not turn. The LCD screen is working and reads clearly.


Keys:

model No. 901

The units are in good cosmetic condition


2x MVP Series Power supplies. ( 1x in each rack unit)

Model Nos. MP8-3Q-1L-00

Both units power on and are in good cosmetic condition. There is dust around and on both units from general use.


1x Hamilton power supply

Model No. 231352/00

The unit powered on and is in good cosmetic condition.


2x APC rack PDU

The units power on and are in good cosmetic condition.


1x GE cO2 Controller:

Ser No. 1352436

The unit powers on and is in good cosmetic condition. The LCD screen is working and reads clearly. All dials and switches appear responsive to the unit.


2x Hewlett Packard PC's: HP workstation xw6200:

The units both power on and are in good cosmetic condition.

There is some dust around the units from general use.


Programs on PC:

•Overlord 2

Version 2.1.0.0


•IN Cell Analyser 1000 3.5

•IN Cell Analyser 1000 3.6

The program is password protected and we could not get past this window to access other parts of the program.


'Shutter Counter 1984048'.


3 x Low Voltage Computer Cables:

•28-4060-63 Umbellcal Axis 0734

•28-4060-66 0647

•28-4060-68 Umbellcal Hamilton 0738



1x Xenon lamp Bulb:

Model OSRAM XBO 100W OFR

The box had been opened. We cannot confirm if this lamp has been used. The unit was in good cosmetic condition.




Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 3,475.00 (ex. VAT) 1 in stock

Boxer Benchtop Autoclave Model 200/40LR Lab

ITEM-25098

This Boxer Benchtop Autoclave Model 200/40LR was removed from a university lab where it was surplus to requirements.


The unit has been professionally serviced and is in full working order. It has passed all safety checks. Full report available on request.


It is in good cosmetic condition but does have marks and stains from use.

Image of item

£ 3,465.00 (ex. VAT) 1 in stock

Sorvall H6000/HBB-6/HLR-6 5000rpm Swinging Bucket Rotor w/ 6x 1000mL Buckets Lab

ITEM-18665

This Sorvall H6000/HBB-6/HLR-6 5000rpm Swinging Bucket Rotor was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition but has not been tested. It will need inspecting for safety before it is used again.


It will require a locking stud as this is not included. P/N 11238


It has 6 x 1000ML Buckets. P/N 44040


The rotor is rated for 5000rpm Max.






Image of item

£ 3,440.00 (ex. VAT) 1 in stock

Waters Alliance 2965 HPLC + Micromass Quattro Micro API Mass Spec, QAA117 Lab

ITEM-18856

This Waters Alliance 2965 / Micromass Quattro Micro QAA117 System was removed from a university lab where it was surplus to requirements.


We had an engineer review the system who reported the following:


Date:     05/04/22                     


Micromass Quattro Micro API. Mass range 2-2000 m/2

Good for reaction monitoring lab drug kenetics

Micromass software is MassLynx


Waters Alliance 2695

Loop vol 100ul

Column Heater

Vial Chiller 4-40˚C

Degasser


----


System switches on - no faults seen. Front end clean. System ready to go. Will require a frontline pump like an Edwards 28.


Pump motor checked in lines ABCD - working - flow not measured. proportioning valve working.

Degasser repaired. Was stuck, now working to 0.7PSIA.

Vial compartment selection working

Vial chiller working down to 4˚C

Sealwash working

Needle wash working

Injection tower working

V1, V2, V3 valves all working.


Are there any notable defects, and if so, can these be rectified?

Degasser stuck - but has now been fixed

V1 & V2 valves have been repaired previously but seem ok.

Seal pack injector seems to be leaking and will need seals replaced.

V1 tubing - needs replacement or just tightening and cleaning up.

Injection pack needs metal tubing and pump out to quat valve.


----


At the time of writing, we are awaiting the minor repairs mentioned above to be completed, but it will be complete prior to the system being dispatched.


Regarding software, the PC has Masslynx v4.1 on it. The PC also has Empower installed but unfortunately we don't have the login so that won't be useable.


As above, a suitable vacuum pump will be required - please ask if you need a quote.


----


Our team then carried out an assessment of the parts that were included:




The lot Contains:


1 x Waters 2965 Separation Module.

The unit is in reasonably good cosmetic condition with marks from use. It powers up but has not been tested further.


1 x Micromass Quattro Micro QAA117.

The unit is in reasonably good cosmetic condition with marks from use. It powers up but has not been tested further.


1 x Buffalo DVSM-PT58U2V Disc Tray.

The unit is in a good used condition but also has some kind of epoxy resin on it. It powers up but hasn't been tested further.


1 x Acer Veriton M288 PC, Keyboard & Monitor.

The unit is in good cosmetic condition with some marks from use. We have removed everything apart from the software including passwords.

It has MassLynx V4.1. software on it which launches. It also has Empower but it requires a username and password we don't have.


2 x Tubes with T Connection Batch No: 8015AR.

1 x Lab Alliance P/N 050106.

1 x Waters Assembly Diffuser.

1 x Esa P/N 55-044B.

1 x GlobTek ITE Power Supply.

1 x Hichrom HIRPB-6372.

Other Multiple Accessories and Cables.


System will come with a 45-day return to base warranty.

Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 3,435.00 (ex. VAT) 1 in stock

Thermo Scientific Heracell 150i CO2 Incubator Lab

ITEM-31317

This was removed from a university lab where it was surplus to requirements.


The unit has been professionally serviced and is in full working order. The report is available on request.


It is in good cosmetic condition with minor marks from use.

Image of item

£ 3,415.00 (ex. VAT) 1 in stock

Eppendorf Refrigerated Laboratory Centrifuge 5804-R Lab

ITEM-20284

This Eppendorf Refrigerated Laboratory Centrifuge 5804-R was removed from a university lab where it was surplus to requirements


The unit has had a replacement actuator and gas strut fitted by a service engineer who then fully tested the unit.


Speed tested to 3600rpm (rotor not included).


It was then temperature tested with a digital thermometer (not included)


37ºC our thermometer showed 34ºC.

4ºC our thermometer showed 1.0ºC.

-9ºC(min) our thermometer showed -5.0ºC.


We would suggest that it was the probe placement that caused the temp readings to be a bit inaccurate.


Image of item

£ 3,415.00 (ex. VAT) 1 in stock

Mega Electronics Process Conveyor Model - FAPC 3000

ITEM-24386

This Mega Electronics Process Conveyor  Model - FAPC 3000 was removed from a university lab where it was surplus to requirements.


The item powers on but displays the error code 'E1'. We referred to the manual which says this error displays when the system cuts power to prevent permanent damage if the liquid is low in level. We don't believe there is anything wrong with it.


It was not tested further.


The item is in reasonably good cosmetic condition but has some marks from use.


Image of item

£ 3,395.00 (ex. VAT) 1 in stock

Stoe STADI P Powder X-Ray Diffractometer Diffraction XRD System, XPOW, Lab

ITEM-21106

This STOE Stadi P Powder Crystallography Laboratory Cabinet System was removed from a university lab where it was surplus to requirements.


We were unable to test this unit at our facility but we were informed by the client that it was fully working prior to removal.


It is in good cosmetic condition with minor marks from use.


Internal dimensions: 160(L)x80(W)x83(H).


There are a number of items extra with this unit. Manuals, key, tubes, cables etc.


There are also floppy discs with " Win X Pow V1.07" software on them. These would need to be run on a FAT16-capable PC or converted to operate on a new file format.



There is no PC supplied with the unit.


Image of item

£ 3,395.00 (ex. VAT) 1 in stock

B Medical Systems Plasma Storage Laboratory Freezer FR 410 G Lab

ITEM-32032

B Medical Systems Plasma Storage Laboratory Freezer FR 410 G


This was removed from a lab where it was surplus to requirements. We are told it was barely used by the client.


The unit powers up and has been tested with a digital thermometer (not included) to -41˚C.


It is in excellent cosmetic condition.


Internal dimensions - L50 W66 H87cm

2 Shelves 63 x 47cm

2 Drawers 59 x 46 x 6cm

Image of item

£ 3,390.00 (ex. VAT) 1 in stock

Olympus BX40F-3 Microscope w/ 5 Objectives & PlanApo100UV MDPlan150 Lab

ITEM-06936

This Olympus BX40F-3 Microscope was removed from a university lab where it was surplus to requirements.


The unit is in reasonable used cosmetic condition but it does have various marks, scratches and signs of general use. The lamp adjustment slider is snapped off but it can still be operated if you put something thin in the hole(ie small flat screwdriver). Please let us know if this is a major problem for you - we may be able to complete a repair or source a replacement.


The microscope has been tested using one of our slides and it appears to work well with all fitted objectives.


The system consists of:


1 x Olympus BX40F-3 Microscope body.

1 x Olympus U-RLA Reflected Light Vertical Illuminator.

1 x Olympus U-SVRS Mechanical Stage.

1 x Olympus U-AC Brightfield Condensor.

1 x Olympus U-TRU Side Camera Port.

1 x Olympus U-TR30 Trinocular Head.

1 x Olympus U-TVO.5XC-2 Camera Adapter.

1 x Olympus U-SPT Phototube fitted with 1 x Olympus Japan PE 3.3X 125 Objective.

1 x Olympus U-PMTVC Camera Adapter.

1 x Olympus U-LS30-4 Lamp (new bulb fitted).


1 x Vantage Camera.

1 x Q Imaging QICam UV Fast Camera.


Both cameras are untested.


Microscope has the following 5 objectives fitted:


1 x Olympus Japan 103250 IC10

MSPlan10

0.30

∞/- f = 180


1 x Olympus Japan T6 20.

LWD CA20PL

0.40

160/1.2


1 x Olympus Japan T4-100580 IC20

MSPlan20

0,46

∞/0 f=180


1 x Olympus Japan 100

DPlan Apo100UV

1.30 oil

160/0.17


1 x Olympus Japan IC150

MDPlan 150

0.95

∞/0 f=180


It is also fitted with a pair of Olympus WH10X/22 eyepieces.

Image of item

£ 3,350.00 (ex. VAT) 1 in stock

Barnstead Lab-Line MaxQ 4000 Incubator Shaker Model - SHKE4000-1CE

ITEM-28143

This Barnstead Lab-Line MaxQ 4000 Incubator Shaker  Model - SHKE4000-1CE was removed from a university lab where it was surplus to requirements.


The unit powers up and is working. It has been assessed by an engineer who replaced the lid struts and fitted a new drive belt.


The only issue is the main power button on the front of the unit doesn't appear to work. This does not affect the operation of the unit at all. It just needs to be switched on and off at the main supply.


The incubator function was tested with a digital thermometer (not included).


The temperature was first set to 37°c. when reached temp the thermometer read 37.6°c.

The temperature was then set to its max temp of 60°c, when it reached temp, the thermometer read 58.8˚c.



Image of item

£ 3,350.00 (ex. VAT) 1 in stock

Tecniplast BS48 Biosafety Changing Station 9CACGBS48UK Lab

ITEM-31176

Tecniplast BS48 Biosafety Changing Station 9CACGBS48UK


This was removed from a laboratory where it was surplus to requirements.


The item powers on with both the white & UV Lights working. The airflow works when the password is entered (we have this available.)


It is in good cosmetic condition with marks from use.


UV Lamp Work hours - 1

Last DOP test - 14/11/2022

Station work time - 1619hrs

Hepa Filter work hours - 478hrs

Hepa Exh filter - 1358hrs


Internal workspace dimensions - W119 x D53 x H62cm

Extends from 200cm to a height of 235cm







Items 261 to 280 of 3024

Filters

Price (£)

to

Condition