FluidX X-Seal AAS Automated Adhesive Sealer with Bambi VT75 Compressor Lab

This was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition and is made up of the following units;

1x FluidX X-Seal AAS Automated Adhesive Sealer

S/N: 1407

This item is in very good cosmetic condition and powered on without issue - The item carried out all of its self-checks successfully on start-up - it was hooked up to the compressor, and carried out one sealing run, performing as intended.

Bambi VT75 Compressor

S/N: VT75-01229

52x42x61 cm

28.08 Kg

This item is in excellent condition (looking almost brand new), powered on without issue, and works as intended - tested to 120 psi.

1x SMC compressor regulator (with connecting tubes)

P/N: AW10-M5

2x Compressor connecting tubes

4x Rubber grommets

1x Roll of Clear Adhesive Seal

P/N: 43-1031

2x Spare Rollers

1x Connection Valve

1x RS232 cable

Perkin Elmer 200 Series HPLC System with PC & Software

This was removed from a university lab where it was surplus.

All the units power up and are in good cosmetic condition with minor marks.

Perkin Elmer Series 200 UV/VIS Detector

Model - Series 200 UV/VIS Detector

S/N - 292N2073015

Part No. - N2920010

Perkin Elmer Series 200 Vacuum Degasser 3 Channel

Model - P-E Series 200 Vacuum Degasser 3 channel

S/N - 6417               (3 channel)

Perkin Elmer Series 200 Autosampler

Model - Series 200 Autosampler

S/N - 293N2100705

Part No. - N2930100

Perkin Elmer 600 Series Link Chromatography Interface

Model - 600

S/N - 600M02100805

Perkin Elmer Series 200 Peltier Oven Column Selector

Model - Oven S 200 Peltier W/Selector

S/N - OVC021015129

Perkin Elmer Series 200 Pump

Model - Series 200 LC Pump

S/N - 291N5092701

Part No. - N2910101

Software

Perkin Elmer Precisely - TotalChrom Workstation - Version 6.2.1

Agilent OpenLAB Control Panel

Thermo Finnigan Surveyor HPLC System, Autosampler, PDA Detector & LC Pump

This was removed from a university lab where it was surplus to requirements.

The system powers up but has not been tested further at our facility.

It is in very good cosmetic condition with minor marks.

Included are;

ThermoFinnigan Autosampler Surveyor

Model: Autosampler

Serial#: 77184

Year: 2002

ThermoFinnigan PDA Detector

Model: PDA Detector

Serial#: 56847

Year: 2002

ThermoFinnigan LC Pump Surveyor

Model: Surveyor MS Pump

Serial#: 62911

Year: 2003

Metrohm 705 UV Digester System

This was removed from a university lab where it was surplus to requirements.

The unit powers up and the UV light is working

It iincludes racking for 12 tubes

Model- 1.705.0017

This Neslab Cryocool CC-100 II Immersion Cooler was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks from use.

This Statebourne Biostor 24 Cryogenic Liquid Nitrogen Storage Dewar was removed from a university lab where it was surplus to requirements.

The unit has not been tested.

It is in reasonably good cosmetic condition with some marks from use.

Specs;

Volume 380L

Internal diameter 788mm

External diameter 900mm

Internal height 835mm

External height 1193mm

Perkin Elmer Janus Automated Workstation with Air Science Purair Advanced Ductless Fume Hood

This system was removed from a university laboratory where it was surplus to requirements.

It has been professionally serviced and deemed to be in full working order, a brief summary of the report is below:

The workstation powers on, initializes successfully, and is in working order. Motion checks for the Varispan, barcode reader, gripper, Peri pump, and syringe pumps were completed without errors. The X and Y rails, as well as the gripper Z worm drive, have been cleaned and lubricated. Tip pick-up and liquid level sensing could not be verified as no tips or system liquid are included. The unit is currently secured with shipping clamps in place.

There is no Software included with this system.

The system is housed within an Air Science Purair Advanced Ductless Fume Hood, which powers on with both light and airflow functioning.

Specifications:

• Workstation Part No.: AJL8G01
• Workstation Serial No.: DG11118582
• Manufacture Date: November 2011
• Last Service: 06-12-2022

Fume Hood:

• Model: Purair P30
• Serial No.: P90786
• Internal Dimensions: L173 W109 H116 cm
• Last Service: 09/08/2022

Accessories:

• Box of Plate Holders.
• Various Cables.
• 2 x Waste Bottles.
• Waste Bin

The system is in reasonable used cosmetic condition.

Sigma 3-16KL Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge is in very good used cosmetic condition, showing signs of general use. The rubber boot around the motor shaft is perished and torn due to age and wear but can be easily replaced and does not affect the unit's operation.

Functionality:

• Powers up and runs as intended.
• Tested at -10ºC and 37ºC, with temperatures reached as expected.

Included Accessories:

• Rotor - Sigma 11180 4700rpm Rotor with Sigma 13190 Buckets

• Bucket Adapters:
• 4 x Sigma 17355
• 4 x Sigma 17356
• 8 x Sigma 17358
• 4 x Sigma 17359
• 4 x Sigma 17362
• 4 x Sigma 17377
• 3 x Sigma 17190 lids for the buckets

Also Included:

• Instruction manual

Thermo Scientific Cytomat Microplate Hotel With Towers

This item was removed from a university where it was surplus to requirement.

It powers on and is in very good cosmetic condition, we are unable to conduct further testing at our facility.

Includes the following microplate towers:

2 x Cytopmet P23

7 x Cytomet P69

Also Included:

1 x data cable

1 x Cytomat Configuration CD

Cambridge Instruments Stereoscan 240 SEM Scanning Electron Microscope

This was removed from a university lab where it was surplus to requirements.

The working condition is unknown. It has been disassembled in storage for some time.

It is in good cosmetic condition with marks from use.

Included with it are;

Monitor & Keyboard.

Pfeiffer pump, Type TPH 170.

Pfeiffer power supply, Type TCP 300.

Some unidentifiable small parts.

Instruction manuals.

Don Whitley Scientific miniMACS DG250 Anaerobic Workstation Glovebox

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order but has not been tested under a vacuum.

It is in good cosmetic condition with minor marks from use.

It is supplied with;

miniMACS Vacuum pump. Serial No. 2633819.

miniMACS Footswitch assembly. Part No. A03107.

Whitley DG250 Anaerobic Workstation User Manual.

don whitley scientific 500/1000 Catalyst Sachet. Part No. A02130.

don whitley scientific 500/1000 Anotox Sachet. Part No. A02129.

don whitley scientific Natural Superflex Tubing. Part No. A00454.

Hitachi Transgenomic Wave L-7000 Series DHPLC System

This was removed from a university lab where it was surplus to requirements.

All units power up but have not been tested further as they require connection to a PC with software.

Included are;

Transgenomic/Hitachi L-7400 UV Detector

Model: L-7400

Part#: 810-0401

Serial#: 1147-080

Transgenomic/Hitachi L-7300 Column Oven

Model: L-7300

Part#: 810-0301

Serial#: 1153-014

Transgenomic/Hitachi L-7200 Auto Sampler

Model: L-7200

Part#: 810-0201

Serial#: 1154-136

Transgenomic/Hitachi L-7200 Chiller

Model: L-7200 ACC

Part#: 810-3301

Serial#: 1134-036

Transgenomic/Hitachi L-7100 Pump

Model: L-7100

Part#: 810-0101

Serial#: 1153-228

Transgenomic/Hitachi D-7000 Interface

Model: D-7000IF

Part#: 810-0091

Serial#: 1124-131

ERC Inc Hitachi L-761 Pump Drive Unit/Degasser

Model: L-761

Serial#: 102895N0775

Additional items included:

Transgenomic Wave Ineractive Help System CD

Part#: 6700002

Transgenomic Wave System Software Accessories CD

Part#: 6700006

Transgenomic Wave System Software Accessories CD

Part#: 6700005

Transgenomic Manual Binder x 2

Thermo Scientific Cytomat Hotel

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes:

-Manual (English Version)

-Manual (German Version)

GE Healthcare Asymptote VIA Thaw CB1000 Cryo Cell Therapy Bags Dry Thawing Lab

Serial No. TBA0618004

Software Version 1.3.17-06f731

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and working order. (Thermometer not included.)

Thaw loading temperatures -196˚C to 0˚C

Thaw temperatures 34˚C to 0˚C

The size of the cryo bags to be thawed is selectable from 25ml to 275ml.

*this item has now passed PAT - requires testing(powering on)*

Jesco Machinery XYZ 1340 Lathe

This item was removed from a university where it was surplus to requirement.

This lathe was removed from a working environment and is reported to have been functional prior to removal.

(skates not included).

Model: XYZ1340

Serial No.: SH9318

Zeiss Axiophot Fluorescent Microscope Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, it has been tested with in-house test objectives.

(Objectives not included)

This microscope includes:

2 x Pl 10x / 25 Eyepiece (44 40 34)

FluidX X-Seal Automated Thermal Sealer with Bambi VT75 Compressor

This was removed from a university lab where it was surplus to requirements.

The system all powers up and is in very good cosmetic condition with only minor marks.

The system is operational. - The sealing count is 1402

Included with it are;

Bambi VT75 Compressor

S/N: VT75-00437

52x42x61 cm

28.08 Kg

1x SMC compressor regulator (with connecting tubes)

P/N: AW10-M5

1x Roll of FluidX Adhesive PCR Foil

P/N: 40-1009

1x Roll of FluidX Chrystal Clear Seal

P/N: 43-1008

1x Roll of KBiosciences Peel Seal

P/N: KBS-0601-001

3x Roll of KBiosciences Clear Weld Seal Mark II

P/N: KBS-0607-002

This Thermo Electron Forma Series II Water Jacketed CO2 Incubator 3141 was removed from a university lab where it was surplus to requirements.

The unit powers up and is in full working order.

It is in reasonably good cosmetic condition with some marks from use. It is missing two feet on the right-hand side, but we can replace these on sale.

2 Shelves - 47 x 47cm

Heto Maxi Dry Plus System With Vacuum Centrifuge + Drywinner Freeze Dryer

This was removed from a university lab where it was surplus to requirements.

The system powers up and is in good working order.

It is in reasonably good cosmetic condition with marks from use.

Max RPM-1800

Includes 2x rotors/tube holders. One holds 4-5ml tubes and the other 12-15ml tubes.

Centrifuge model number- VR maxi-1

Centrifuge serial number- 804040235

Freeze dryer model number- CT/DW 110

Freeze dryer serial number- 804050097

Maxi dry model number- MAXI-DRY PLUS

Maxi dry serial number- 804060037

Able Engineering Oil Blending Vessel System with Armaturen ARI DP32 Valve

This was removed from a university lab where it was surplus to requirements.

It is in a good clean used condition.

Item is supplied with:

1 x Armaturen ARI DP32 Valve.

1 x Lightnin Model: ECI-M51- 150. Serial No. 2747863.

1 x Pump TEC Electric Motor Model: MS2100l-6. Serial No. 1107-004 1949.

1 x Alfa Laval Model: Unique SSV PN10. Serial No. 21127802513. Year 2011.

1 x Flux F424 Seal-less Barrel Pump.

Various ARI Valves & assorted Pipework.

It has not been tested in any way by us.

Serial No: LUB13074-7.

Build date: 2012.

Volume: 360 Ltr.

Construction Category: G.E.P. Tested March 2012.

Material: 304 Stainless steel.

Varian ProStar System GC 410, PDA Detector, Solvent Delivery Module System Lab

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition and have powered on and passed self-check tests.

We are unable to test them further at our facility as the system does not include a PC with relevant software.

All units included are as follows:

Varian ProStar Model 410 HPLC Autosampler Lab

P/N - 03-935290-03

S/N - 20300

PDA Detector

Model - 330

S/N - 00924

Good condition.

Solvent Delivery Module

Model - 210

S/N - 02241

Good condition.

Solvent Delivery Module

Model - 210

S/N - 02242

Good condition.

GE Healthcare Asymptote VIA Thaw CB1000 Cryo Cell Therapy Bags Dry Thawing Lab

Serial No. TBA0620110

Software Version 1.5.1-ed925b

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and working order. (Thermometer not included.)

Thaw loading temperatures -196˚C to 0˚C

Thaw temperatures 34˚C to 0˚C

Last calibrated 19.01.23

The size of the cryo bags to be thawed is selectable from 25ml to 275ml.

Jobin Yvon Horiba Fluorolog System w/ PC & Software Lab

This was removed from a university lab where it was surplus to requirements.

The system is in good cosmetic condition with all units powering up, we are unable to test further at our facility.

1x Horiba Fluorolog TCSPC

Model FL3-11

S/n 0934B

1x Horiba Single Proton Counting Controller Fluorohub

Model 

S/n 05862

1x Horiba TB-02 : 0.5GHz amplifier module:

S/n 05834

1x Horiba SPEX DM302 P.C ACQ Module:

Model DM302

S/n 3000

1x Nanoled Pulsed Diode Light Source:

Model NanoLED-370

S/n 05854

•Peak wave length - 369mm

•Max Repitition rate - 1MHz

•Pulse Duration - 1.2ns

•Mf date 08/03/07

1x SpectrAcq PC

1x Antec PC

•OS: Windows XP

1x Fluoressence USB 

The unit is in good cosmetic condition.

Horiba Jobin Yvon Manuals:

1x Fluorolog -3 with Fluoressence Operation Manual

1x Datastation V2.3 User Guide

1x Fluorohub User Guide

1x Nanoled User Guide

FisherBrand GT 1R Centrifuge w/ TX-150 Swinging Bucket Rotor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and working order, it has been tested to its MAX (4350RPM)

This item also includes the following:

Thermo Scientific TX-150 Swinging Bucket Rotor

Max speed: 5000RPM

weight class: G

Serial#: 75005701

This Leica MZFLIII Fluorescence Stereomicroscope with EBQ 100 PSU was removed from a university lab where it was surplus to requirements.

The microscope and power supply are in working order, we are unable to test it further at our facility.

It is in reasonably good cosmetic condition, but has a visible crack at the front of the unit.

This Bio-Rad PDS-1000/He Biolistic Particle Delivery System was removed from a university lab where it was surplus to requirements.

The system powers up but we were unable to test this further at our facility.

It is in good cosmetic condition with marks from use throughout.

Also included are the following:

1x Circle Seal Control Solenoid

3000 PSI

1x Busch Pump

Model: KB 0010 D 100

S/N: 01017631

1x Bio Rad PDS Voltage Converter

1x USA Power Cable

1x Australia/China Power Cable

Sanyo MDF-U74V Ultra Low Temperature Freezer

This was removed from a university lab where it was surplus to requirements.

It is in good working condition and has been tested with a digital thermometer (not included) to -86˚C.

It is in good cosmetic condition with minor marks from use.

Sanyo MDF-794 Ultra Low Temperature Chest Freezer

This was removed from a university lab where it was surplus to requirements.

It is in good working condition and has been tested with a digital thermometer (not included) to -86˚C.

It is in good cosmetic condition with minor marks from use.

Internal dimensions - L184 W50 D76cm

Wheaton 753680-2 Reach In Incubator

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. (Digital thermometer used for testing not included).

It is in reasonably good cosmetic condition with marks from use.

PHCBI Cooled Incubator MIR-154 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition internally and externally.

PHCBI Cooled Incubator Model Type MIR-154 Labs

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition internally and externally.

This item requires a passcode to operate, which is available on request.

PHCBI Cooled Incubator Type - MIR-154 Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in very good cosmetic condition internally and externally.

This item requires a Passcode to operate which is available on request.

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine

This was removed from a university facility where it was surplus to requirements.

The unit is in full working order but has not been run since 2020.

It is in good cosmetic condition with minor marks.

This was removed from a university facility where it was surplus to requirements.

The unit is in full working order but has not been run since 2020.

It is in good cosmetic condition with minor marks.

Thermo Scientific Revco Ultima Plus ULT Freezer Model ULT3280-10HD-V43

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks from use.

Capacity 906 Litres

Internal dimensions W 99cm x L 69cm x H 1975cm

Four stainless steel shelves 98cm x 68cm

This Bio-Rad PDS-1000/He Biolistic Particle Delivery System was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test ti further at our facility.

It is in good cosmetic condition with marks from use.

Included with it are;

1 x Circle Seal Controls SV11A32P4P33 Solenoid Valve (plugs into back of PDS)

1 x Regulator - Tescom Model no. 44-1812-24V-147

Faster SafeFAST Classic 212 Class 2 Microbiological Safety Cabinet

This was removed from a university lab where it was surplus to requirements.

The unit powers up and operates but the UV bulb will need replacing.

It is in good cosmetic condition with minor marks.

Operating time - 20252:04

UV Hours - 4998:54

This Thermo Scientific Revco UXF Ultra Low Temperature Freezer was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

It is in good cosmetic condition with marks from use.

4 x Shelves - 71 x 69cm

Model - Revco UXF

Model no. UXF50086V63

SN - 0132487401131018

Thermo Electron Heraeus Multifuge 4 KR Refrigerated Centrifuge with Rotor

This was removed from a  lab where it was surplus to requirements.

The unit has been fully tested and is in full working order up to 4400rpm.

It is in good cosmetic condition but has a crack in the lid viewing window. It does not affect the operation.

Included with it are;

Sorvall Heraeus Rotor

75006476

Max 4400 rpm

4 x Sorvall Heraeus Buckets

75006477 F

Max 4400 rpm

Metrohm 870 KF Titrino Plus with 703 Ti Stand 1.703.0010 Titration System

This was removed from a university lab where it was surplus to requirements.

The system is in very good cosmetic condition with minor marks from use.

Included are;

1x Metrohm KF Titrino plus

Model 870

Prog version: 5.870.0025

The unit powers on and is in good cosmetic condition. The digital display is working, however, there are some signs of screen burn, thus making it a little difficult to read the screen. It is completely readable though.

1x Metrohm 703 Ti Stand

Type: 1.703.0010

The unit is in good cosmetic condition but we were not supplied with the PSU, so have been unable to power it up for testing.

Gilson HPLC System & Accessories - 306 - 811B - 805 - 832 - 7955- 119 - 506C

This was removed from a university lab where it was surplus to requirements.

This is a large system. Most of the units have been powered up but it has not been tested further. We anticipate it may take some level or refurbishment to get it back to full working order.

Included are;

1x Gilson XL Sampling injector:

Model 231

The unit powers on and is in good cosmetic condition

2x Gilson Piston Pumps:

Model 306

The units both power on and are in good cosmetic condition.

1x 15 pin MALE to FEMALE Ribbon cable:

The unit is in good cosmetic condition.

1x Gilson Manometric Module:

Model 805

The unit is in good cosmetic condition.

There was no power port on the unit, it must be powered by a controller cable connected via a 306 Pump.

1x Gilson Dynamic Mixer:

Model 811B

The unit powers on and is in good cosmetic condition.

1x Gilson Temperature Regulator:

Model 832

• Version 1.01

The unit powers on and is in good cosmetic condition.

1x Gilson Collum Chiller:

Model 7955

The unit powers on and is in reasonable cosmetic condition.

1x Gilson UV/VIS Detector:

Model 119

•Version 2.01

The unit powers on and is in good cosmetic condition.

1x Gilson 506C System Interface unit:

The unit is in good cosmetic condition. No sign of power.

1x 25 pin MALE to FEMALE serial cable for the (Gilson 506C System Interface unit)

The unit is in good cosmetic condition.

1x 25pin Male to 9pin FEMALE connector adaptor.

The unit is in good cosmetic condition.

1x Gilson Dilutor:

Model 401 

The unit powers on and is in good cosmetic condition.

1x Decade Electrochemical Amperometric Detector:

ANTEC Leyden

Version 3.02

The unit powers on and is in good cosmetic condition.

1x Viglen Contender PC:

Model C3000A

*OS

Windows 98

•Software

UniPoint LC Version 3.01

The unit powers on.

Accessories:

1x Viglen Monitor

Model TS700

The unit powers on and is in good cosmetic condition.

1x Viglen Keyboard

Model KB-0325

•PS/2 connector

The unit is in good working and cosmetic condition 

1x Microsoft Mouse:

FCC ID: c3kkmp1

•PS/2 connector

1x VGA Cable:

The unit is in good working and cosmetic condition.

CD:

1x Gilson UNIPOINT for Windows 98

Version 3.0

Floppy Disk:

Gilson System Software:

•Version 1.71

•Disks 1 - 4

Ser no. 219H8B765

The units are in good cosmetic condition.

•Win32s Disks 1-2

The units are in good cosmetic condition.

2x Gilson 10WSC heads (cases)

Ref E50056

• 3x Gilson WSC Pistion Pump Head user guides are inside the cases.

1x Gilson Thermostatic Rack Unit:

Ser no. 270J1G048

The unit powers on via the (Gilson 832 temperature regulator)the unit is in good cosmetic condition.

Gilson Racks for the thermostatic unit.

1x Rack Well, 60x 2ml glass or plastic vials.

Part no 30

1x Rack Well, 108 x 0.7ml glass or plastic vials.

Part no 31

The units are in good cosmetic condition.

1x Gilson Serial Input/Output Channel:

5 sets of( 2x FEMALE to 1x MALE 9pin connectors)

Manuals:

1x Unipoint system software: (Folder)

The manual is in good condition and appears to be complete.

1x Gilson 506C System Interface User Guide:

The manual is in good condition and appears to be complete.

1x Gilson 401 Dilutor Instruction manual:

The manual is in good condition and appears to be complete.

2x Gilson 231-401 Auto Sampling Injector Instruction manual:

The manuals are in good condition and appear to be complete.

1x Gilson 119 uv/VIS Detector User Guide:

The manual is in good condition and appears to be complete.

1x 802C. 803C, 804C Manometric Module Instruction manual:

The manual is in good condition and appears to be complete.

2x Gilson 306 Piston Pump User Guide:

The manuals are in good condition and appear to be complete.

3x Gilson WSC Pistion Pump Head User Guides:

The manuals are in good condition and appear to be complete.

1x Gilson UNIPOINT for Windows 98 User Guide:

The manual is in good condition and appears to be complete.

2x 1x Decade Electrochemical Amperometric Detector Manuals:

The manuals are in good condition and appear to be complete.

1x Gilson 832 Temperature Regulator User Guide:

The manual is in good condition and appears to be complete.

1x Gilson 811B Dynamic Mixer User Guide:

The manual is in good condition and appears to be complete.

1x Gilson 805-806-807 Manometric Modules User Guide:

The manual is in good condition and appears to be complete.

1x Gilson SC- type Piston pump head Instruction manual:

The manual is in good condition and appears to be complete.

1x Gilson 506C System Interface User Guide:

The manual is in good condition and appears to be complete.

1x Gilson 506 Contact/ Modem Operators Guide:

The manual is in good condition and appears to be complete.

Syringes:

2x Phenomenex HPLC Columns:

Model SYNERGI 4U Hydro- RP 80A

1x •Size 250x4.60mm

1x •Size 250x3.00mm

The units are in good cosmetic condition.

1x Phenomenex HPLC Column:

Model SYNERGI 4U Polar - RP 80A

•Size 250x4.60mm

The unit is in good cosmetic condition.

1x Phenomenex HPLC Columns:

Model HyperClone 5u ODS (C18) 120A

•Size 250x4.60mm

The unit is in good cosmetic condition.

1x Phenomenex HPLC Columns:

Model HyperClone 5u SILICA 120A

•Size 250x4.60mm

The unit is in good cosmetic condition.

1x Phenomenex HPLC Columns:

Model Phenosphere - NEXT 5u C18

•Size 250x4.60mm

The unit is in good cosmetic condition.

2x HYPERSIL (5u ODS) Syringes:

Prod no. 30105-062

•Size 150x4.60mm

The units are in good cosmetic condition.

1x HYPERSIL (5u HyPURITY) Syringe:

Prod no. 21005-022

•Size 150x4.60mm

The unit is in good cosmetic condition.

2x HYPERSIL (ELITE C18 5u) Syringes:

Prod no. 30105-062

•Size 150x4.60mm

The units are in good cosmetic condition.

2x Phenomenex SYNERGI 4u Hydro -RP 80A Syringes:

Part no. 00G-4375-E0

•Size 250x4.60mm

The units are in good cosmetic condition.

1x Phenomenex HYPERSIL 3u C18 (ODS) Syringe:

•Size 100x2.00mm

The unit is in good cosmetic condition.

1x Phenomenex HYPERSIL 4u MAX -R P 80A Syringe:

•Size 150x4.60mm

The unit is in good cosmetic condition.

1x Phenomenex LUNA 3u c18(2) 100A Syringe:

•Size 100x2.00mm

The unit is in good cosmetic condition.

2x HYPERSIL 3 C18 Syringes:

•Size 100x4.60mm

The units are in good cosmetic condition.

1x Phenomenex BIOSep- SEC-S 200 Syringe:

•Size 300x7.80mm

The unit is in good cosmetic condition.

1x Phenomenex JUPITER 5u C18 300A Syringe:

•Size 150x4.60mm

The unit is in good cosmetic condition.

1x Hamilton Microliter Syringe:

Model no. 1802RSNE

•25uL

The unit is in good cosmetic condition.

1x Hamilton Microliter Syringe:

Model no. 1801RSNE

•10uL

The unit is in good cosmetic condition.

1x Hamilton Microliter Syringe:

Model no. 801RNE WAT

•10uL

The unit is in good cosmetic condition.

Sanyo -86 ULT Freezer - Model - MDF-U74V Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition.

*Previously sold item, recently found in the stock count.*

This Sanyo MDF-U74V VIP Series Ultra Low Temperature Freezer was removed from a university lab where it was surplus to requirements.

The unit powers up and achieved -80˚C in testing. We left it on overnight.

It is in good cosmetic condition with some minor marks from use.

Internal dimensions - D58.5 W87 H140cm

3 Shelves - 53.5 x 85.5cm

This High-Q femtoREGEN Class 4 Laser was removed from a university lab where it was surplus to requirements.

The unit is untested and was marked as faulty by the lab. An engineer inspected it, and they identified the optics, Second harmonic and third harmonic crystals were in good order. They were unable to test it further without the water circulator, though they did mention it looked like someone had been inside the pocket cell in the past.

The fault is unknown but could be something to do with the pocket cell.

The system is comprised of;

1x High-Q femtoREGEN Laser:

Model IC-1030-1000 Yb HR REG AMP SHG-THG

Inside the unit:

1x User Replaceable Diode Module (URDM #2506)

The unit is in good cosmetic condition.

1x User Replaceable Diode Module (URDM 3W/5.14A/25C/976.2nm

The unit is in good cosmetic condition.

This Grant RC 1400G Recirculating Chiller was removed from a university lab where it was surplus to requirements.

The unit powers up and is in reasonable cosmetic condition with some marks from use.

We tested it at multiple temperatures and it is in working order.