All Products
Items 901 to 920 of 3094
£ 915.00 (ex. VAT) 1 in stock
GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks Lab
ITEM-25464
This GT 55 Liquid Nitrogen Dewar with 6 x Storage Racks was removed from a university lab where it was surplus to requirements.
The unit is in reasonable cosmetic condition with some marks from use. It has not been tested.
There are 6 Racks inside with drawers that hold 5ml tubes.
£ 915.00 (ex. VAT) 1 in stock
Sanyo CO2 Incubator Model - MCO-18AIC (UV) Lab
ITEM-27468
This Sanyo CO2 Incubator Model - MCO-18AC was removed from a university lab where it was surplus to requirements.
The unit is in good working order but the UV lamp requires a replacement bulb. We can look at replacing this for you upon purchase.
The unit will need calibration on installation.
It is in good cosmetic condition with minor marks from use.
Internal dims - D51 W48 H65
4 Shelves - 45 x 45cm
£ 910.00 (ex. VAT) 1 in stock
Varian ProStar 335 Diode Array Detector lab
ITEM-24902
This was removed from a university lab where it was surplus to requirements.
The unit powers up but we were unable to test it further at our facility.
It is in good cosmetic condition with some marks from use.
£ 910.00 (ex. VAT) 1 in stock
Mettler Toledo Titrator Model - DL21 Lab
ITEM-27546
This Mettler Toledo Titrator Model - DL21 was removed from a university lab where it was surplus to requirements.
The unit powers up but we were unable to test it further at our facility.
It is in reasonable cosmetic condition but the button panel is loose and needs to be glued back on.
It's supplied with a serial cable.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 910.00 (ex. VAT) 1 in stock
CTC Analytics MXY 08-01B Liquid Handling System Lab Spares/Repairs
ITEM-20678
This CTC Analytics MXY 08-01B Liquid Handling System was removed from a university lab where it was surplus to requirements
The system powers up but has several issues.
Both robot heads start to work when powered up and they seem to go through an initialisation sequence. The dispenser for the robot on the Right drops at a point so we suspect this one probably has an issue.
Both LCD handsets appear to be faulty and the LCD displays just show a pixelated mess. The petelier does not power up at all and the display is loose.
The PC has quite a few bits of software:
Microcal Origin 7 SR4
VP Viewer 2000 Version 3.0.5
NanoDrop ND-1000 V3.1.0
We cannot tell if the robot is connected to the software. There does not appear to be any obvious way to see this.
System Parts:-
CTC Analytics MXY 08-01B
SN - 180088
MicroCal HT Microcalorimeter
Model - AutoITC
Powers on
CTC Analytics PN - MN 03-00
Stack Cooler DW
MC 04-01
SN - 3495
2 x CTC Analytics MicroCal AutoSamplers PN - MB 01-00A
2 x CTC Analytics PN - MN 01-00 - Both power on
CTC Analytics MODBUS
PN - MV 03-2A
SN - 0.0202
CTC Analytics MZ 012-00E
SN - 0239
CTC Analytics MZ 012-00E
SN - 0240
CTC Analytics MSH 02-00B
Viglen PC
NEC Monitor
Microsoft Mouse
Cherry Keyboard
All power on and work fine.
£ 910.00 (ex. VAT) 1 in stock
Severn Instruments PCV-3000 Gate Control Valve
ITEM-24361
Severn Instruments PCV-3000 Gate Control Valve
This was removed from a university lab where it was surplus to requirements.
The unit has not been tested.
It is in reasonable cosmetic condition but has lots of marks from age and use.
£ 905.00 (ex. VAT) 1 in stock
BIGNEAT PCR UV Workstation Lab
ITEM-31049
This BIGNEAT PCR UV Workstation was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order. It is in reasonably good cosmetic condition with marks from use.
Internal dimensions - D52 W76 H68cm
Bottom Storage - D50 W79 H71cm
£ 905.00 (ex. VAT) 1 in stock
APC UPS Uninterruptible Power Supply Model SRT6KXLI
ITEM-37002
APC UPS Uninterruptible Power Supply Model SRT6KXLI
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order.
It is in good cosmetic condition with minor marks.
£ 905.00 (ex. VAT) 1 in stock
FluidX XSD-96 Pro Tube Automated Capper and De-Capper Lab
ITEM-36370
FluidX XSD-96 Pro Tube Automated Capper and De-Capper
This was removed from a university lab where it was surplus to requirements.
This item is in good cosmetic condition and powered on without issue. It carried out self-checks on start-up - the touch screen is fully functional and the drawer opened and closed, in testing, performing as intended.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 905.00 (ex. VAT) 1 in stock
Miele Professional Double Laboraratory Glass Washing Machine PG 8527 Lab Fautly
ITEM-36828
Miele Professional Double Laboraratory Glass Washing Machine PG 8527
This was removed from a university lab where ti was surplus to requirements.
The system powers up and the lights are in working order. We were told by the lab that both machines have drying and fine filter faults.
The window on machine 2 has been smashed during an accident since the photos were taken, but the system is in otherwise good cosmetic condition
It is sold for spares/repairs.
1 - Type - PG 8527 (2016)
SN - 51/07 4392611
2 - Type - PG 8527 (2018)
SN - 51/074403100
On/off Switch is missing
Internal dimensions -
L84 W66 H73cm
Loading Trolley
MF-2728-1
M-Nr.6575876 09/66
Dimensions - L93 x W71 H103cm
Pumps:-
2 x Miele Type - TA-S3
2 x Miele Type - TA-S4
£ 905.00 (ex. VAT) 1 in stock
Bright Microtome Model M3500 Lab
ITEM-25225
This Bright Microtome Model M3500 was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition. it requires 2 x AA batteries to operate (not included).
There are some tape marks on the unit from general use the battery compartment had signs of corrosion but we have cleaned this up, but some signs remain. It doesn't affect the operation of the unit.
All dials and buttons appear to be responsive to the unit and move freely.
£ POA 1 in stock
COULTER Z2 PARTICLE COUNT & SIZE ANALYZER
ITEM-34886
This item is new in stock. Please enquire for further details.
£ POA 1 in stock
Agilent 3D CE Capillary Electrophoresis Unit Model: G1600AX
ITEM-36258
This item is new in stock. Please enquire for further details.
£ 900.00 (ex. VAT) 1 in stock
Beckman Coulter Particle Counter & Size Analyser Z2 w/ Controller
ITEM-36836
Beckman Coulter Particle Counter & Size Analyser Z2 with Controller
This was removed from a university lab where it was surplus to requirements.
The unit powers up but we were unable to test it further without a diluted solution.
It is in good cosmetic condition with minor marks from use.
£ 900.00 (ex. VAT) 1 in stock
LEEC SFC3C/RH Humidity Cabinet Lab
ITEM-36815
LEEC SFC3C/RH Humidity Cabinet was removed from a university lab where it was surplus to requirements.
It powers up and is in working order. The humidity functions were not tested.
It is in good cosmetic condition with marks from use.
5 shelves - 48 x 48cm
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 900.00 (ex. VAT) 1 in stock
Beckman L7-65 Ultracentrifuge Lab Spares/Repairs
ITEM-29720
This Beckman L7-65 Ultracentrifuge was removed from a university lab where it was surplus to requirements.
The unit powers up and runs well, but the cooling system does not work.
It is in good cosmetic condition with minor marks.
It is sold for spares/repairs.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 900.00 (ex. VAT) 1 in stock
Dionex IC25 Ion Chromatograph Lab
ITEM-38971
Dionex IC25 Ion Chromatograph
This was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced and is in good working order.
It is in good cosmetic condition with minor marks from use.
£ 895.00 (ex. VAT) 1 in stock
Labtech LT-4000 Microplate Reader Lab
ITEM-35639
Labtech LT-4000 Microplate Reader
This was removed from a university lab where it was surplus to requirements.
The unit powers up but we were unable to test it further at our facility.
It is in good cosmetic condition with minor marks.
£ 895.00 (ex. VAT) 1 in stock
10 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights Lab
ITEM-35645
10 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights
These were removed from a university lab where they were surplus to requirements.
Each item powers on and is in good working order. They are all in good cosmetic condition with minor marks.
Includes:
10 x Ohaus 200g weights
10 x power supplies
4 x manuals
These scales also have the option to be operated with AA batteries
Max 300g
Model number- TA301
£ POA 1 in stock
Perkin Elmer Wallac Victor 2 1420 Multilabel Counter & Liquid Injector
ITEM-29719
This item is new in stock. Please enquire for further details.
Items 901 to 920 of 3094