Waters Xevo TQ-S Mass Spectrometer w/ PC & Mass Lynx Software Lab

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition and power up. The Waters Xevo pairs successfully with the Mass Lynx software.

The password required for the PC is available on request.

This system comprises the following:

1 x Waters Xevo TQ-S Mass Spectrometer

S/N: WAA280

1 x Edwards Pump XDS100B Dry Vacuum Pump

S/N: 119487143

1 x Edwards Pump XDS46i Dry Vacuum Pump

S/N: 139464035

1 x Lenovo Thinkcentre PC

S/N: S4DVW20

1 x Lenovo L 2250pwD Monitor

S/N: V6-0DED6

1 x Kensington keyboard

1 x Microsoft Mouse

4 x Various connection cables

1 x Stainless steel pipe

2 x Pump hose pipes with aluminium fittings and various clamps

Intravital Microscope System - Zeiss Examiner Z1 with Accessories & Software

This is being sold on behalf of a client. It is surplus to requirements.

The system is in full working order, and in excellent cosmetic condition with minor marks.

There are a vast amount of accessories, extras and add ons included with this system.

1. VivoTM 100 Intravital Microscopy Workstation

Includes motorized research fixed stage upright microscope stand with harmonic focusing drive, 2-position

nosepiece, motorized 5-position filter cube turret, manual narrow profile long WD condenser, slider for Dodt

contrast, LED transmitted light lamphouse, two camera ports with c-mounts, crosshair reticle and dust cover. Also

includes direct-coupled white light LED epi illuminator, high speed 2048x2048 sCMOS Flash4.0 v2+ camera, motorized

x,y translating platform stage, 36"x36" vibration isolation table and equipment rack workstation. Windows 7 64-bit workstation with dual Six-Core Xeon 1.6GHz processors (10M L3 Cache), 16GB 2133MHz DDR4 RAM, 2GB Nvidia Quadro K620 workstation graphics card, 256GB Solid State Drive (SSD) (approx. 300MB/s sequential transfer rate),

8XDVD+/-RW, 1300W power supply, backlit wired keyboard and 27" flat panel monitor. SlideBookTM software for 3D multipoint image capture and analysis and one additional offline license. System includes one day of on-site installation and training, a one year warranty on all hardware components and one year of free updates for all software components.

2. W Plan-Apochromat 40x/1.0NA Water Dipping Objective for VIVOTM

Working distance 2.5mm.

3. Upgrade from LED White Light Source Direct Coupled to LED 4-Color Light Engine for Fixed Cell Imaging for Zeiss Microscopes

includes light engines for DAPI (390/18), GFP (475/28), RFP (542/27) and Cy5 (632/22)

4. Microscope Filter Cube for DA/FI/TR/Cy5 Pinkel Set (No Exciters)

for LED illumination, includes quad-band dichroic and quad-band emitter

Photomanipulation Equipment -

5. Ablate!TM Photoablation System for Fixed Position Illumination

532nm pulsed laser, pulse energy > 60 ?J @ 200 Hz. Includes automated intensity control and Photomanipulation module for SlideBookTM.

6. Ablate!TM Epi Mount Adapter for VIVOTM

Allows attachment of Ablate!TM illuminator to the epi-fluorescence port of VIVOTM workstations. Also allows attachment of a widefield epi-fluorescence light source via light guide for simultaneous illumination

.

7. Ablate!TM 532 Notch Dichroic for Epi Mount Light Sources

transmits 532 laser, reflects visible wavelengths >90%

8. Support Kit for Ablate!

9. Microscope Filter Cube for Ablate!TM 532 Notch Dichroic and Blocker for Intensifier

includes notch dichroic for 532 illumination and blocking emitter for protection of intensifier from reflection of 532 pulses

The system is available for collection from Cambridge, UK, but we may be able to offer delivery of the system at an extra cost. Please enquire for a quote.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Leica CTR 6000 TCS SP5 Laser Scanning Confocal Microscope

This system was removed from a laboratory where it was surplus to requirements.

The system powers on, with all units functional, including the stage and light sources.

According to the previous owner, the system features a Leica SP5 confocal with 3 PMT and 2 hybrid detectors, along with an FCCS system that includes 2 SPAD detectors. The filters for the detectors are beginning to delaminate and will need replacing. The SP5 computer is relatively new and has been updated to Windows 10. A full environmental chamber for temperature and CO2 control is also included.

The system consists of:

• TCS SP5 Control Desk, Microscope, and Scan Unit (Serial No. 510000038, Year: 2007)
• Leica CTR 6000 Controller (Serial No. 280210)
• Leica CMS Detection Unit (Part No. BS054407)
• Leica APD Detection (Serial No. 65031)
• Leica Scan Head/Trigger Box (Serial No. 0051)
• Leica Switch Console V3 (Serial No. 0028960)
• Leica Cooling Fan and Flexible Duct (Part No. 1531229001)
• Leica Mercury Lamp Box (Type 11307072071/BZ)
• LEJ Mercury Bulb Controller (Type ebq 100mc-L, Serial No. 06 2380802161, 217 hours bulb run time)
• Leica Stage Controller (Part No. 11505180)
• The Box polycarbonate microscope enclosure
• The Cube CB02A Enclosure Heater with probe (Serial No. 10585)
• The Brick Air Humidity and CO2 Regulator (Serial No. 10654)
• Gecomp PC running Windows XP Pro (Serial No. 071362)
• HP Z4 PC running Windows 10 (Serial No. CZC026C55L, Product No. 1JP11AV)
• 2 x NEC 1990SXi Monitors (Serial Nos. 6Z009731YB, 6Y008209YB)
• Cherry Keyboard (Model MY 3000 USB, Serial No. G0006934)
• HP KB-1469 Keyboard (Serial No. 803180-L31)
• 2 x HP Mice (Part Nos. 672651-001, 458407-002)

The microscope is fitted with five objectives:

• Leica 784 HCX PL APO 100x/1.4-0.7 oil cs
• Leica 510 HCX PL APO 63x/1.4-0.6 oil cs
• Leica 214 HCX PL APO 20x/0.70 1MM corr bl
• Leica 506251 HCX PL APO 40x/1.25-0.75 oil
• Leica 506279 HCX PL APO 63x/1.2 W corr cs

Additional components:

• Twin binocular eyepieces HC PLAN s 10x/125 M
• 7 x colour filter and mirror blocks, 2 x filter block covers
• 12 x stage parts
• 1 x humidity water cylinder for The Brick

Included Software & Manuals:

• Leica Software Discs: Confocal Software v. 2.585 (2x), LAS AF v. 2.73-9723, SP5 WS Premium Recovery, SP5 SP8 Standard G4 Recovery W10, SP5 Workstation Recovery
• 2 x copies of Windows XP Professional OS
• Manuals: Newport PR 50 compact high-speed rotation stage, Coherent Sapphire 488-20 & 410-10 OEM Laser, The Brick operating manual, The Cube 2 temperature controller manual

Stylcam 200R High Speed Rotary Press Simulator System w/ PC & Software Lab

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition with all units powered on, we are unable to test it further at our facility.

This system includes a PC set-up with the following software installed:

• Analis 2.01.16 Version

This system cannot be exported and the eventual buyer will be subject to a disclaimer.

ttp labtech ARKTIC 3106-00216 -80˚C Automated Biobanking Storage System (spt)

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we have been unable to test it further. The compressors are working, and all user data has been removed from the software.

Software installed: Arktic version 1.9.5 (Build 12)

It is in excellent cosmetic condition with minor marks from use.

This item is new in stock. Please enquire for further details.

Thermo Vacuum Generators High Vacuum Deposition Sputtering System Lab

This system was removed from a university lab where it was surplus to requirement.

The previous client has stated that it was in full working order when last used, reaching 10<sup style="color: rgb(51, 60, 68); background-color: rgb(255, 255, 255);">-9</sup> mbar vacuum.

It is in good cosmetic condition with all units included in good working order.

The system comprises the following components:

• Thermo Vacuum Generators main reaction chamber

Serial No. CH0412005

• 2 x Softshut gate units Part No. V10EA100

Serial Nos. SS0412002 SS0412003

• Leybold Turbovac Pump Serial No. 30000045767
• Pfeiffer Vacuum compact cold cathode gauge Type IKR261

BOC Edwards EXT75DX turbomolecular high vacuum pump

Serial No. 046074705

• 3 x Luftkuelung pump cooling fans
• 3 x Vulcatherm V1 1000W heaters
• 2 x Elstein FSR 1000W heaters
• RHC Vacuum Generators ZRHC substrate heater controller

Serial No. RC0407002

• Turbotronik NT20 and NT10 analysis chamber and load lock control unit

Serial No. 30000050971

• Thermo Electron AML pressure gauge controller

Serial No. 0006

• Thermo Electron 8558 argon etch gun controller

Serial No. G117

• Hiden Analytical ion gun turbo interface
• Pfeiffer ion gas gun gauge
• Power breaker circuit box
• Leybold vacuum pump Type D16B serial No. 30000044357
• Edwards vacuum pump E2M1 serial No. 046078290
• Leybold vacuum pump type S1.5 serial No. 20900831099

Additional parts:

• 2 x 16 amp cartridge fuses
• 14 x 2 amp cartridge fuses
• 1 x filament for ion gauge DC7033AA
• 2 x air 1/4" tee pieces
• 1 x pfeiffer seal for ion gun BN846241-T
• 4 x resistor filaments
• 1 x Kurt J. Lesker 500g net tin of molecular sieve 1/8" pellets Type 13x

Operating and instruction manuals:

• Thermo EX03 Ion Gun System
• Thermo High Pressure Gas Cell
• Arun Microelectronics Pressure Gauge Controller Interface
• Pfeiffer Vacuum TPG261
• Varian MidiVac Controller 929-x
• Varian Sublimation Controller 929-x
• Leybold Turbovac
• Leybold turbotronik NT20 - NT10
• Eurotherm 2132 and 2166 PID Temperature Controllers

OpenSPR-XT Unit And OpenSPR Unit OSPR4.0

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition. We are unable to test it further at our facility.

THe system was serviced last year and was confirmed to be in good working order prior to removal.

Includes the following;

Dell Laptop

Nicoya spare parts kit (opened)

OpenSPR-XT Unit

Model- 840

S/N-191015

OpenSPR Unit

Model-OSPR4.0

S/N-4-163

Dell Laptop

Model-Latitude 3500

S/N-5HRJLT2

Manufactured Year-2019

Includes:

TraceDrawer software

OpenSPR software (Needs Updating)

This was removed from a university lab where it was surplus to requirements.

The system powers up and communicates with the PC and Software. It has not been tested further.

It is in good cosmetic condition with minor marks.

Applied Biosystems MDS SCIEX QSTAR Elite

Assy no. 1017064

SN - AP10870612

Parts inside identified:-

2 x Oerlikon Leybold Vacuum Turbovac Wide Range TW 690 MS

1 x Leybold Vacuum Turbovac TW 250 S

1 x SCIEX Turbo Ionspray, Assy no. 019296, SN - 055000928

1 x Inficon VGC023

1 x Spellman Unit

1 x 024143 Nanospray Switch Module

Pump on wheels:-

MDS SCIEX Assy no. 022832, SN - 70208570839

Pump Inside unit:-

Varian DS 602, Model 949-9335, SN - 245808

With Varian Oil Exhaust Filter NW25 coming out of top

Model - 949-9392

Powers on and appears to be in working condition.

Dell PC:-

MDS SCIEX PN - 1018761

Computer - P670 with Image

Comes with Dell 17" Monitor,

Keyboard & Mouse

PC Powers on and has Analyst QS 2.0 Software

Username - Administrator, No Password

Spare parts & accessories:-

1 x SCIEX Ion Sprayer, Assy no. 017614, SN - 0861050707

1 x SCIEX Heated Nebulizer, Assy no. 014989, SN - 219970226 w/ Assy no. 14368, SN - 311970312

1 x Part 022765-B CFN 0685

1 x Box labelled Maldi Plates, contains 2 x AB PN:4347689 & Approx 50-60 plates

1 x Box labelled Nano flow head with part inside

1 x CS Lilin PIH-090 9" Monitor (SN-0000553) - Powers on

1 x ULTRAK 9" Video Monitor Model - KM0900MN, SN - M2060084 - Powers on

1 x Ionwerks TDCx8

1 x SCIEX PN - 1009917, SN - 000519 - Powers on

1 x Box labelled QStar Elite RF Coils w/ parts 1003097 B & 1003098 B attached to SCIEX Filterboards

1 x MDS SCIEX PCB Interconnect, 022102-D, CFN

2 x Boxes labelled QStar elite parts - Full of small parts

2 x Leybold Vacuum TurboVac TW 690 MS

1 x 024143 Nanospray Switch Module

1 x 1002133 Signal Handling Module

1 x Harvard Apparatus Cat no. 98-0921, SN - 14816

1 x Inficon VGC023, SN - 399-557 - Powers on

2 x Oerlikon Leybold Vacuum Turbo Drive 690 MS

1 x Oerlikon Leybold Vacuum TW 250 S, SN - 20900451496

2 x SCIEX Turbo Nanospray, Assy no. 019296, SN - 037000911 & 11350070122

1 x SCIEX Ionspray, Assy no. 017614, SN - 656030708

1 x QLP 022353-A

1 x Spellman PN - X3359, Model - CZE5PN37X3359, SN - 52760-1-A00295 - Powers on

7 x Gold Modules:-

QPS Amplifier 1010829

CCPS 1017191

Lens PS 1024829

QPS Exciter 1008444

System Controller 1008411

DACS & Vaccum Gauge 1024717

HVPS 1012202

5 Folders of Manuals, service records, Hardware guides and Logbooks

This Knapp Open Shuttle OS100B Flexible Autotomous Robotic Warehouse Shuttle is being sold on behalf of a client. It is surplus to requirements.

The unit is in excellent cosmetic condition and has only seen <50h of use.

Technical information about the Knapp Open Shuttle OS100B:

• Speed: Up to 1.6 m/s (safe)
• Max. Acceleration: 1,0m/s²
• Minimum turn radius: 360° turn at standstill
• Delivery: both front and rear possible
• Container dimensions: Up to 800 mm x 600 mm
• Optional integrated lift (550 mm to 1,500 mm)
• Maximum load: 100 kg
• Battery life: Over 6 hours, continuous operation
• Charging time: Approximately 60 minutes (charge ratio > 1:6)
• Conveyor top edge: 500 mm to 1,000 mm
• Protection class: IP20
• Battery: LiFePo4 (lithium iron phosphate)
• Communication method: WLAN (b/g/n standard) in 5GHz range
• Dead weight: 130kg

Collection only from Hanau, Germany.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.



Thermo Scientific LTQ Orbitrap XL Hybrid Ion Mass Spec System

This system was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition and powered on with the pump operable. The previous owner has stated that the PC & hard drive has been removed as they had stopped working, but they reported no faults with the MS itself.

It powers up but has not been tested further.

Also included with the listing is the following;

1 x Thermo Scientific Gas Specific Triple Filter Helium

2 x LTQ Orbitrap Biotech Operations Training Course Manual

Various other unidentifiable parts - photos included.

GE Healthcare AKTAready Chromatography FPLC System Lab

This system was removed from a university lab where it was surplus to requirements.

All units included are in good cosmetic condition and powered on, but we are unable to test them further at our facility.

We can include the PC and software at an additional cost.

Please inquire for a detailed quote if interested.

System Components:

• 1 x AKTAready Chromatography FPLC System
• 1 x Lenovo ThinkPad Laptop
• 1 x Futek Model - LCM300
• 6 x SMC Pressure Regulator Model - R72G-2GK-RMN

Additional Components:

• Swagelok Pat'D 316 QC8 key 5 (Blue Band)
• 8 x new in packaging, male
• 1 x out of packaging, male
• 1 x attached to the unit, male
• Swagelok Pat'D 316 QC8 key 5 (Yellow Band)
• 5 x new in packaging, male
• 2 x out of packaging, male
• 3 x attached to an inline separation tap with 10 cm of blue piping, male
• Swagelok Pat'D 316 QC6 key 4 (Yellow Band)
• 1 x out of packaging, female
• Swagelok Pat'D 316 QC6 key 2 (Orange Band)
• 1 x attached to an inline separation tap with 10 cm of blue piping, male
• 4 x new in packaging, male
• Swagelok Pat'D 316 QC6 key 1 (Black Band)
• 1 x attached to an inline separation tap with 10 cm of blue piping, male
• 2 x out of packaging, male

GE Healthcare AKTAready Single-Use Chromatography FPLC System

This item was removed from a university laboratory where it was surplus to requirements.

The unit powers on, but further testing could not be conducted at our facility. It is in good cosmetic condition, showing minor marks from use.

Cytiva has recommended that a new computer and license are necessary for full functionality.

We can include the PC and software at an additional cost. Please inquire for a detailed quote if interested.

Includes a box containing the following parts:

• 1 x Pneumatic Air Supply Hose
• 1 x System Computer Cable
• 2 bags of Clamps (3 per bag)
• 2 x Sealed Packs of Tubing
• 1 x USB Cable
• 1 x Service Key
• 9 x Packs of GE PN-18-1112-51 (2 per pack)
• 1 x GE RJ45 Coupler PN-56-3274-14
• 1 x GE Cooling Collars (A+B) PN-19-7825-01
• 10 x Omnifit 2.0mm Peek Barbed Adaptors
• 5 x Omnifit Adaptor to female luer (Cat no. 002502)
• 1 x Assure Plus 3 1/4" x 6 1/2" (Cat no. 83000)

Hamilton Microlab Chemagic STAR Liquid Handling Workstation with Software

This was removed from a working lab where it was surplus to requirements.

The unit was purchased by the lab some time ago, but was only ever lightly used, if at all. It came to us in the original packaging.

With it are;

1 x Perkin Elmer Chemagic STAR Extraction unit

SN - 083

1 x Chemagic STAR Table

PN - 806102/01

SN - 7554

Dimensions - L236 W78 H81cm (with frame on top it goes up to 105cm)

Other parts:-

2 x Chemagic 24 Rod Heads

6 x RGT_CAR PN - 185436/00

2 x RGT_CAR PN - 185290/01

13 x APE_Carrier PN - 198588/01

2 x TIP_CAR PN - 182085/03

1 x APE_Carrier PN - 188039/00

10 x Tube Racks (Holds 12 x 50ml)

4 x Tube Racks (Holds 12 x 12ml)

6 x Tube Racks (Holds 32 x 12ml)

2 x Tube Racks (Holds 12 x 1ml)

2 x Tube Racks (Holds 32 x 1ml)

6 x SMP_CAR PN - 185249/00

8 x MP_CAR PN - 185248/00

2 x RGT_CAR PN - 187299/00

14 x Plate Holders

2 x Trays holding 32 parts labelled 185315

3 x CO-RE Needles

2 x PN - 198935/00

Various screws

Power Cable

Roll of waste bags

Box containing Brackets

Manuals/Software:-

Microlab STAR Line Programmer's Manual

Microlab STAR Line Operator's Manual

Chemagic STAR Installation package V2.0 Part 1

Chemagic STAR Installation package V2.0 Part 2 Medium Volume

Chemagic STAR Installation package V2.0 Part 2 High Volume

Microlab STAR Venus Two Base Package 4.3

Microlab STAR Venus Two Service Pack 1

Consumables:-

7 x Packs Hamilton CO-RE Tips 120 5ml Tips without Filters

6 x Packs Hamilton CO-RE Tips 480 High Volume Tips (1000µL) without Filters

1 x Box of 10 x 200ml Reagent Containers

1 x Box of 6 x 200ml Reagent Containers

2 x Boxes of 12 x 50ml Reagent Containers

1 x Box of 7 x 50ml Reagent Containers

2 x Boxes of 12 x 120ml Reagent Containers

1 x Box of 8 x 120ml Reagent Containers

1 x Box of 250 Perkin Elmer Disposable Tips

Beckman Coulter MoFlo Astrios EQS Flow Cytometer System & Sterilgard Cabinet

This was removed from a university lab where it was surplus to requirements.

The PC with the system cannot run the software. The software is included but will require a Beckman OEM PC system to run.

The unit has the following lasers installed:

1 X 640NM - 106MW.

1 x 592NM - 200MW.

1 X 561NM - 202MW.

1 x 532NM - 150MW.

1 x 488NM - 200MW.

1 X 405NM - 55MW.

The writing is quite faint on the MW output, so the above figures might not be 100% correct.

The complete system consists of:

1 x Baker Company SG503HE-BC-INT SterilGARD hood.

Manufactured 04/13/2015.

The unit has been powered up.

1 x Moflo Astrios EQS Main Unit.

The unit has various marks and scratches from general use. It powers up fine.

1 x Moflo Astrios Lower/Laser/Computer Section.

The laser & computer system power up fine.

Miltenyi Biotec CliniMACS Plus Cell Sorter Separator Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

Serial No. 002599

Manufactured April 2022

Miltenyi Biotec CliniMACS Plus Cell Sorter Separator Lab

This item was removed from a university where it was surplus to requirement.

It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility.

Serial No. 002421

Manufactured June 2021

Thermofisher Quant Studio 5 Real-Time PCR Machine

Inventory ID: DAM_QS5F

Condition: Used

Year: 2021

Vin/Serial No: 272528491

Full working order, sale is to due to this system being surplus to requirements

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Bruker D2 Phaser Benchtop XRD Diffractometer

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition, but we are unable to power it up at our facility due to restrictions on X-Rays.

The previous user reported it was working prior to removal, it was just no longer needed by the lab.

However, we were notified that some sample mounts/adapters were lost during transport to the lab.

Includes:

• USB stick
• Key
• Keyboard
• Mouse

Specifications:

• Model: A26-X1-A2B0B2B
• S/N: 204931

MoFlo Astrios EQS Cell Sorter in BSL Hood.

All units are in good used cosmetic condition.

The system powers up as it should.

We were informed by the lab that the Red laser is faulty and requires replacement.

The unit has the following lasers installed:

1 X 640NM - 106MW.

1 X 561NM - 202MW.

1 x 488NM - 200MW.

1 X 405NM - 55MW.

The writing is quite faint on the MW output, so the above figures might not be 100% correct.

The complete system consists of:

1 x Baker Company SG503HE-BC-INT SterilGARD hood.

Manufactured 09/30/2013.

1 x Moflo Astrios EQS Main Unit.

The unit has various marks and scratches from general use.

Powers up fine.

1 x Moflo Astrios Lower/Laser/Computer Section.

The laser & computer system powers up fine.

1 x Thermo/Haake SC100/A28 re-circulator/chiller.

Powers up fine.

1 x Intellipower UPS.

Powers up fine.

1 x Jun-Air OF302 Silent Air Compressor.

It was noted by the lab that this is quite loud. We powered it on and it sounds normal for one of these units.

Also includes various spares and accessories shown in pictures.

3 x '100' spare nozzle tips

8 x '70' spare nozzle tips.

This Protein Technologies Prelude Peptide Synthesis System is being sold on behalf of a client. It is surplus to requirements.

The unit is in full working order and the software is included. The PC is built in, and controlled by the included monitor & keyboard.

The plastic section of the ducting will be retained by the Lab, the metal section coming directly from the Prelude is included.

It is in very good cosmetic condition with only minor marks from use.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

NanoSight NS300 Nanoparticle Tracking Analyser Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

There are cosmetic scratches on the unit which do no affect the function.

Large VacGen Vacuum Tank & Beam Tube with VAT Gate Valves.

This was removed from a university where it was surplus to requirements.

The lab confirmed that all the equipment is in excellent functional condition and has been housed in a clean room lab for the full lifetime.

Tank Dimensions: L 136cm x W 126cm x H 260cm.

Tank is fitted with 6 openings.

3 x 65cm x 65cm.

2 x 10cm x 10cm.

1 x 15cm x 15cm.

Beam Tube Dimensions: L 450cm x W 81cm x H 81cm.

Opening 65cm x 65cm.

2 x Gate Dimensions: L 100cm x W 24cm x H 183cm.

Opening 65cm x 65cm.

Fitted with SMC Solenoid valves Model: VF3143.

Three studs have been snapped off in one of the Gate valves.

Battenfeld Microsystem 50 Injection Moulding Machine

This was removed from a university workshop where it was surplus to requirements.

The unit was not tested on our site, but the lab confirmed it was in working order prior to removal.

It is in good cosmetic condition with minor marks.

Tecan Fluent 780 Robotic Liquid Handler Year 2021

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

The lab informed us the system was in good working order prior to removal.

Software not included.

Product details:

Model: Instrument Fluent 780

Serial No. 2108001479

REF 30042021 00

Eight injector head

40 x plate holders

Includes the following:

1 x Winmate R12L100-PCM2 monitor 30cm viewing, serial No. 2420BW023146

1 x Power supply unit 30059387, serial No. 21926675

2 x USB cables

1 x HP mouse

Tecan Fluent 780 Robotic Liquid Handler Year 2021

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

The lab informed us the system was in good working order prior to removal.

The software is not included.

Product Details:

Model: Instrument Fluent 780

Serial No. 2108001479

REF 30042021 00

Eight injector head

40 x plate holders

Includes the following:

1 x Winmate R12L100-PCM2 monitor 30cm viewing, serial No. 2420BW023146

1 x Power supply unit 30059387, serial No. 21926675

2 x USB cables

1 x HP mouse

Zeiss AXIO Observer Z1 w/ CO2/02/Temp Module S1, Axiocam, MCU 28 Lab

This microscope system was removed from a university where it was surplus to requirement.

All units included are in good cosmetic condition, the previous user has stated that this system was in working order prior to removal.

We were able to test the following, which are in working order:

• Zeiss Pecon CO2 Module S1
• Zeiss Pecon O2 Module S1
• Zeiss Pecon TempModule S1
• Zeiss Pecon Heating Unit XL S
• Zeiss MCU 28 w/ Controller
• Zeiss AIM-System
• Zeiss Axio Observer LCD TFT touchscreen Control Panel

Unable to test the following, due to the reasons stated alongside:

• Zeiss HBO 100 Fluorescence Microscope Lamp 423010 - Unable to power on due to Class 4 Laser warning label.
• Zeiss Axiocam HRm - Power supply cable not included.

The microscope is fitted with:

• 2 x Zeiss 1016-758 W-Pl 10x/23 Microscope Eyepiece

There are no objectives included.

This microscope system features all the parts listed above, we are unable to test this system further at our facility due to restrictions on operating lasers on our site.

This Thermo Scientific LTQ Orbitrap XL Hybrid Ion Mass Spectrometer was removed from a university lab where it was surplus to requirements.

The system powers up and is in excellent cosmetic condition. It was confirmed by the lab that it was working when last used in December 2022, though it is out of service.

Included in the system are;

1 x Thermo Scientific LTQ Orbitrap XL.

1 x Thermo Scientific LTQ XL.

1 x Thermo Scientific Neslab ThermoFlex 900.

1 x Edwards 28 Vacuum Pump.

1 x Edwards 30 Vacuum Pump.

1 x Orbitrap Extractive Operations Training Course Manual.

1 x LTQ Orbitrap Biotech Operations Training Course Manual.

1 x Thermo Scientific LTQ Manual.

1 x Thermo Scientific LTQ Orbitrap XL Hardware Manual.

2 x Thermo Scientific LTQ Orbitrap XL 2.5.5 Software.

1 x Thermo Scientific LTQ 2.6.0 SP1 Instrument Control.

1 x Thermo Scientific Xcalibur 2.0.7 SP1.

1 x JAI CV-A55 IR Camera & housing.

Renishaw Structural & Chemical Analyzer Model SCA SEM Raman Spectrometer

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is almost brand new. It has only run for 134 hours.

It is in excellent cosmetic condition with minor marks.

Baker Ruskinn Invivo2 500 Hypoxia Glovebox Workstation on Trolley

This system was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with a digital thermometer (not included). Both the CO2 & O2 sensors are functional.

It is in good cosmetic condition internally and externally.

The internal light would not work.



Support trolley with castors 141 x 71 x 83cm (l x w x h)

Bruker Esquire 300 Plus Mass Ion Trap Spectrometer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The item is fitted with a Granville-Phillips Micro-Ion Module.

Serial No. 354C1206.

Date: May 08.

Also includes the following:

Agilent LC/MS Gas Purifier for Nitrogen.

Collection bottle & hose.

Copper pipe with fittings.

Assorted leads.

THERMO Scientific Cellomics ArrayScan VTI HCS Reader

This was removed from a university lab where it was surplus to requirements.

Everything powers up but has not been tested further at our facility.

It is in good cosmetic condition with minor marks.

Included with it are;

1x ArrayScan Vti Live Cell module

P/N: N01-0114

M/N: 06112135

1x Carl Zeiss Fc12

M/N: FC12

S/N: 4632000797

Thermo HCS Studio Cellomics View v6.5.1 software on disc.

Software manuals:-

HCS Studio Software Client

HCS Studio - View

Calibration Verification Wizard

System Configuration Tool

Other manuals:-

Target Activation V3 BioApplication Guide

Live Module User Guide

Robot Plate Handler User Guide

ArrayScan HCS Reader Objective Installation Guide

Store 1.4.2 Standard Edition New Install User Guide

HCi MiddleWare Installation Guide

Brightfield Module User Guide

Liquid Handling Module Calibration and Testing Guide

vHCS TooBox 1.6.2 Installation Guide

Calibration Verification Wizard User Guide

ArrayScan Vti HCS Reader Administrators guide

2 x User Guide Addendum

Liquid Handling Module Users guide

HCS Applications Server Administrators Guide

Apotome Module User Guide

Thermo Finnigan LCQ Advantage Mass Spectrometer Surveyor LC-MS System

This was removed from a university lab where it was surplus to requirements. The lab confirmed that everything was in working order prior to removal. We have powered up everything but were unable to test further at our facility.

All the units are in good cosmetic condition with minor marks.

Included are;

1 x Thermo Finnigan LCQ Advantage Mass Spectrometer System

Serial No. LAD00300

1 x Surveyor PDA Detector

Part No. SRVYR-PDA5

Serial No. 56866

1 x Surveyor Autosampler

Part No. SRVYR-AS

Serial No. 77269

1 x Surveyor MS Pump

Part No. SRVYR-LPUMP

Serial No. 62615

1 x Edwards 28 Vacuum Pump

Model E2M28

Serial No. 170517841

Supplied with:

1 x Xcalibur LCQ Advantage Revision 1.3.

1 x Xcalibur LCQ Advantage/DecaXP Revision 1.3 SP1.

1 x Xcalibur Core Data System Software Revision 1.3.

1 x Thermo MSQ 2.0 SP2 Instrument Control.

1 x Thermo Xcalibur 2.1 W/Foundation 1.0.2 Rev.B.

1 x Thermo Xcalibur LC Devices 2.4.0.

2 x Thermo Xcalibur LC Devices 2.3.0 Software.

1 x Thermo TSQ Series 2.1.1.

1 x Thermo SurveyorPlus Manual Set.

1 x Thermo Part No. 23043457 Start cable Integrator/Gtrace.

1 x Thermo Part No. 23038071 Recorder Cable L=1900mm.

1 x Emerson Industrial Automation Leroy-Somer Engine;

2 x Spark Generators;

1 x PULNIX 20mm CCD Camera;

5 x Cables;

3 x Spacer 7.7x3.2;

1 x Spacer 6.3x3.2;

2 x ThermoFisher Scientific Tubing Fused SI 150Ux390U;

2 x Storer: TFS;

1 x ThermoFisher Scientific Insulator Heater APCI;

1 x O-Ring;

1 x Plunger.

This was removed from a university lab where it was surplus to requirements.

OAI Model J500/VIS Mask Aligner

Model 506&4-072449

Serial No. 1230

Manufacture year 1999

2 x 23cm Javelin Monitors Model BWM9C serial Nos. 97120360, 97120355

2 x JH Technologies microscope lights model LR92240

1 x Optical Associates UV light controller model 4000-104-01 serial No. 570

In very good used condition

The previous owner stated the vacuum chuck that secures the work piece may have some blocked airways from the printing media used.

The system powered on and the 2 optical microscope lights illuminated and displayed an image of the surface of the work platform on the monitors. The extractor fan works well and the UV light illuminated. The microscope moved around smoothly on the mounting slides but could not be moved by the joystick.

It has not been tested further.

Waters Q-Tof Premier Mass Spectrometer

This item was removed from a university laboratory where it was surplus to requirements.

The mass spectrometer powers on and is in good cosmetic condition. Further testing could not be conducted at our facility.

Please note, no PC, software, or additional components are included with the unit.

Includes:

• 1x Male to Male 26-pin Serial Cable
• Model No.: G1330-81600

Model: Q-Tof Premier

Agilent / HP 1100 Series System With Spiderling Oven, 1100, Degasser, MSD

This system was removed from a university where it was surplus to requirement.

All units are in good cosmetic condition and power on independently, we are unable to conduct further testing at our facility.

The lab confirmed the system was working when last used in 2022.

This system comprises the following:

1 x Spiderling oven -CS4000

1 x Agilent 1100 Automatic Liquid Sampler -G1313A

1 x HP 1100 Series Diode Array Detector -G1315A

1 x Agilent 1100 Pump -G1312A

1 x HP 1100 series Degasser -G1322A

1 x Agilent MSD -G1956B

1 x HP 1100 Series Solvent Tray-G1322A

Agilent 7500c ICP-MS G3155A Inductively Coupled Plasma Mass Spectrometer Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

Biosafe Sepax S-100 Lab

This item was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

This item is new in stock. Please enquire for further details.

Beckman Coulter MoFlo XDP Cell Sorter Laser Cytomation System + Optics Table Lab

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, the working condition of each unit that we were able to test is listed below.

Parts of the system:-

Optics Table - MoFlo Optical Bench

SN - 2086

Dimensions - L153 W122 H80.5cm

Measurement - Imperial

Parts fitted on table:-

Pressure Console Unit

SN - 2086

Coherent Sapphire

Model - Sapphire LP USB CDRH Driver Unit w/display

PN - 1189089

SN - LDP.1189089.C02070

• Powers on

Coherrent Sapphire 488-200 CW CDRH

PN - 1137970

SN - LDP.1137970.521683

Heatsink Sapphire LP RoHS compl

• NOT TESTED

Coherrent Cube

PN - 1170509

SN - C20010803

• NOT TESTED

Coherrent Cube

PN - 1193821/AA

SN - C14070901

• NOT TESTED

Hamamatsu Parts:-

H957-27 (No.T0050)

H957-18 (No.K0149)

H957-27 (No.T3721)

H957-25 (No.S0319)

H957-25 (No.S0360)

H957-25 (No.S0359)

H957-25 (No.S0322)

H957-25 (No.S0324)

H957-27 (No.T0051)

H957-27 (No.T0054)

H957-25 (No.S0358)

H957-25 (No.S0321)

H957-25 (No.S0323)

Smart Sampler

2 x Preamplifier Units

SN - 2086

DTx Data Display 19" LCD w/Touchscreen

BCI PN - B44222

DTx PN - 90819

SN - BCM0514F37003

• Powers on via Miami MoFlo XDP Controller

Under table units:-

DTx BCI Miami MoFlo XDP Controller

DTx PN - 90692

BCI PN - B20566

DTx SN - BCM0915F44602

• Powers on - When powered up, an error message reads 'OdinInstControl::connectMachine failed: AttachedInstrument::GetInstance:Repository had communication error!'

Gast Vacuum Pump

DOA-P501-BN

• Powers on

Intellipower UPS

Model - IQ200V-C-DiAC-Isol-PFC

SN - 2FKVDIFC5B15110524

• Powers on

Beckman Coulter Aerosol Evacuation System Buffalo Filter w/ Pedal

Model - 200-0179

SN - 502135

Has ViroSafe Filter fitted (PN-200-8166)

• Powers on.

3 x 316L UM Alloy Products Corp Pressure Vessels:-

SN - S533735-1-005 (2014)

SN - S514233-1-011 (2010)

SN - S507165-1-008 (2008)

Other units:-

Thermo Scientific Recirculating Water Bath

Control - C10 Type - 003-5009/SN - 1 08004133017

Bath - K20 Type - 002-4276/SN - 08004052 003

• Powers on

Testing:-

37˚c - Thermometer read 37.6˚c

100˚c - Thermometer read 100.0˚c

-20˚c - Thermometer didn't read lower than -13.5˚c

Jun Air Compressor

Type - OF302-25MQ

SN - 0119802962

• Powers on with compressor running

Hours - 00898.3

Other spare bits:-

1 x Black Case of various filters

1 x Black Case containing 3 x Merlin Gerin fuses, Methanol & Acetone

2 x Sets of Spare Shaped Charged Plates (one pair boxed)

1 x Box of Filters

1 x Box of mixed size O-rings

Red Ethernet cable

5 x IEC Extension cables