Items 161 to 180 of 3024

Image of item

£ 5,435.00 (ex. VAT) 1 in stock

Applied Biosystems MagMAX Express 96 Particle Processor Type - 710 Lab

ITEM-31752

This Applied Biosystems MagMAX Express 96 Particle Processor was removed from a university lab where it was surplus to requirements.


The item powers on and is in good cosmetic condition with some marks from use. The table Rotation works, but we were unable to test it further without software.


Ambion MagMAX 96 Total RNA Isolation Kit Instruction Manual

12 x Processing Plate & Lid (PN-10038GA1)


Image of item

£ 5,425.00 (ex. VAT) 1 in stock

Bio-Rad PDS-1000/He Biolistic Particle Delivery System Lab

ITEM-27757

This Bio-Rad PDS-1000/He Biolistic Particle Delivery System was removed from a university lab where it was surplus to requirements.


The system powers up but we were unable to test this further at our facility.


It is in good cosmetic condition with marks from use throughout.



Also included are the following:

1x Circle Seal Control Solenoid

3000 PSI


1x Busch Pump

Model: KB 0010 D 100

S/N: 01017631


1x Bio Rad PDS Voltage Converter

1x USA Power Cable

1x Australia/China Power Cable


Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 5,275.00 (ex. VAT) 1 in stock

Perkin Elmer AAnalyst 200 Atomic Absorption Spectrometer with Accessories Lab

ITEM-27543

This Perkin Elmer AAnalyst 200 Atomic Absorption Spectrometer was removed from a university lab where it was surplus to requirements.


The unit powers up and has been tested by an engineer. They did not use acetylene/air gas. The system is working fine and the detector responds to the change in the intensity of the light.


The HCL lamps have been tested and all powered up, though we are not sure of the age.


The PC is not in working order but the software is installed onto the AA itself and can be controlled with the touch screen. We have left the PC with the system in case it has any useful cards.


The system is in good cosmetic condition with marks from use.


Included are;


Perkin Elmer AAnalyst 200 Atomic Absorption Spectrometer

Part no. B3150050

Unit dimensions - D75 7W0 H66cm


Manuals:-

Analytical Methods for Atomic Absorption Spectroscopy folder

AAnalyst 200 Users and service guide


Used Hollow Cathode Lamps:-

6 x Perkin Elmer Lumina Lamps

16 x Varian

6 x SpectrAA

13 x S&J Juniper

6 x Instrumentation Laboratory

2 x Cathodeon

2 x Photron

3 x Pye Unicam

1 x ASL

1 x Varian Techtron

1 x Activation

1 x Spectronic


Please note, that some of the lamps in the photos have been removed from this listing. The following lamps are no longer included.


1 x Varian Arsenic

1 x Varian Chromium

1 x Varian Zinc

1 x Varian Mercury

1 x Instrumentation Laboratory Hollow Cathode Lamp

1 x S&J Juniper Lamp

1 x Perkin Elmer Pb

1 x Perkin Elmer Fe

1 x Perkin Elmer Ni


Image of item

£ 5,245.00 (ex. VAT) 1 in stock

Bio-Rad PDS-1000/He Biolistic Particle Delivery System Lab

ITEM-31911

This Bio-Rad PDS-1000/He Biolistic Particle Delivery System was removed from a university lab where it was surplus to requirements.


The unit powers up but we were unable to test ti further at our facility.


It is in good cosmetic condition with marks from use.


Included with it are;


1 x Circle Seal Controls SV11A32P4P33 Solenoid Valve (plugs into back of PDS)


1 x Regulator - Tescom Model no. 44-1812-24V-147


Image of item

£ 5,190.00 (ex. VAT) 1 in stock

Eppendorf EpMotion 5075 LH Automated Liquid Handling System Computer Version Lab

ITEM-25977

This Eppendorf EpMotion 5075 LH Automated Liquid Handling System was removed from a university lab where it was surplus to requirements.


The unit is in good used cosmetic condition but it does have various marks and signs of general use.


The system consists of:


1 x Eppendorf epMotion 5075 Liquid Handler.

Fitted with a Siemens SIMATIC PC running Eppendorf epBlue 10.04.0020 Software. It also comes with a Dell monitor, Microsoft keyboard and Siemens mouse.


We have run a basic test program on the robot and it does run.


Included with it are;

1 x Eppendorf 20 - 300ul TS 300.

1 x Eppendorf 20 - 300ul TM 300-8.

1 x Eppendorf 1 - 50ul TS 50.

1 x Eppendorf TG-T Gripper & Gripper Holder. (This appears to be an expensive part on it's own)


1 x Eppendorf Module Reservoir.


It also comes with the original PCi card for the dual monitor setup. We have removed this as it appeared to be possibly faulty. It is now set up using the original built-in DVi output.


Image of item

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 5,155.00 (ex. VAT) 1 in stock

Ikonisys Ikoniscope Model 2000 Robotic Microscope System Lab Spares/Repairs

ITEM-14387

Ikonisys Ikoniscope Model 2000 Robotic Microscope System.


This item was removed from a lab where it was surplus to requirements.


We were unable to test it. It will not power up. We think there may be a fault with the APC power bank. The power supply was also blown when mistakenly connected to 240v instead of 110v. We did get it powered up with a PSU from another unit (not included). The bios indicates a memory issue, it is possible that the memory was damaged when the power supply perished.


The unit is in very good cosmetic condition but has some marks from use.


Included in total is;

Ikonisys contains:

1 x Olympus U-CMAD3

1 x Olympus U-TLU 7e14411.

1 x 4XEM Network Camera WLPTG.

1 X Redlake MegaPlus 2 ES 2020.

2 x Symbol Miniscan LS-1220-I300A Lasers.

1 x Phytron ZSS 41.200.2,1 E-4Lp.

1 x LUDL Electronics 89-IK-15000 Filter Chnager.

1 x Olympus UPlanFl 100x/0.95 ∞/0.14-0.20 Objective.

1 x Olympus UPlanSApo 40x/0.95 ∞/0.11-0.23/FN26.5 UPLSAPO40X2 Objective.

1 x Olympus UPlanSApo 10x/0.40 ∞/0.17/FN26.5 UPLSAPO10X2 Objective.

1 x Olympus UPlanFLN 4x/0.13 ∞/-/FN26.5 UPLFN4X Objective.

1 x Olympus UPlanSApo 20x/0.75 ∞/0.17/FN26.5 UPLSAPO20X Objective.

1 x 8 Port StarView.

1 x Smart UPS 2200.

1 x Olympus BX-UCB Universal Controller Unit.

1 x LUDL Electronics MAC5000 PS System.

1 x LUDL Electronics 99A360-IK Shutter 30mm W/HSNG.

1 x Olympus U-LH100HG.


Accessories include:

1 x Partial Reel Of Ikonisys Barcodes.

1 x Multimedia Computer System (No branding?)

1 x Y-UM76A Logitech Keyboard.

1 x Damaged Microsoft 1058 Wireless Mouse (Has No Battery Connection and cover) With Receiver.

1 x AL1717 F LCD Monitor.

6 x Keys For Ikonisys Unit.

1 x Symbol LS2208-SR20007R-UR Barcode Scanner & Stand.

1 x Peninsula Pheonix 2 Barcode Scanner.

1 x PC Wire.

14 x Spare Slide Boxes.

Image of item

£ 5,075.00 (ex. VAT) 1 in stock

Grant RC 1400G Recirculating Chiller Lab

ITEM-31257

This Grant RC 1400G Recirculating Chiller was removed from a university lab where it was surplus to requirements.


The unit powers up and is in reasonable cosmetic condition with some marks from use.


We tested it at multiple temperatures and it is in working order.



Image of item

£ 5,005.00 (ex. VAT) 1 in stock

Waters Alliance 2695, 474 FLD & 2996 PDA Detector, Micromass Single Quad ZQ HPLC

ITEM-18847

This Waters Alliance HPLC System is being sold on behalf of a UK university.


It was removed from a lab in working order, and then serviced by an engineer at our site.


Engineers report is as below:


The flow motor was checked on the A, B, C & D lines. The proportional valve was confirmed as working. The degasser was working at 0.9PSIA. The FLD switches on and the lamp works. The Micromass ZQ switches on with no issues but will require a foreline pump such as an Edwards 28. The HPLC vial chiller and column heater are both working ok.


The system has no notable defects but will require Micromass Mass Lynx software before it can be used. It is a clean system with no issues.


Our team also made some notes on the parts list which are as below:


The system consists of;

1 x Waters 474 Scanning Fluorescence Detector.

1 x Rheodyne MX7900-000. (has some cracks on the underside casing)

1 x Waters 2996 Photodiode Array Detector.

1 x Waters 2965 Seperation Module.

1 x Micromass ZQ.

1 x Agilent 82357B Cable.

1 x Grey Plastic Tray With Funnel.

1 x Deep Dark Grey Tray (2 Clips Snapped Off).

2 x Tubes with T Connection Batch No: 8015AR

Multiple Accessories and Cables.


No further tests were carried out but system should be in good working order and will be sold with 45-day return to base warranty.


Buyers will require an appropriate foreline pump and MassLynx software

Image of item

£ 5,005.00 (ex. VAT) 1 in stock

MicroCal VP-ITC MicroCalorimeter System with PC & Software Lab

ITEM-30571

This MicroCal VP-ITC MicroCalorimeter System was removed from a university lab where it was surplus to requirements.


The original PC was faulty so we fitted the PCi card to a spare Dell Optiplex we had.


The system shows a PCi error on the Windows startup so it doesn't appear to be fully connected to the VP-ITC unit. The hardware manager shows the PCi cards as working as they should so it seems like there is no actual issue here. The PCi card software was installed automatically when the system was first started.


The injector unit which is connected via RS232 is communicating with the system and we were able to get that to do various things.


We are including the original PC with the listing in case it is vital to getting the system running properly. A monitor, mouse and keyboard is also now included.


Included are;


MicroCal MicroCalorimeter

Model - VP-ITC

Powers on


MicroCal ThermoVac Degassing Station

Model - USB ThermoVac

Powers on with Vacuum working

Temperature dropped to 4˚c when set and then as low as 0˚c (minimum)

Temperature then reached 37˚c, followed by 81˚c when set to 99˚c (maximum)


The PC has the following software installed:

MicroCal VPViewer2000 Version 1.4.12

Origin 7 SR2

MicroCal, LLC DSC

MicroCal, LLC ITC



Accessories:-

USB Cable

RS232 Cable

3M VP-ITC to PC Cable

1000ml Glass Flask


Image of item

£ POA 1 in stock

Olympus BX45TF Ergonomic Microscope

ITEM-29924

This item is new in stock. Please enquire for further details.

Image of item

£ 5,000.00 (ex. VAT) 1 in stock

Affymetrix GeneChip Scanner 3000 System with Hybridization Ovens & Autoloader

ITEM-25299

Affymetrix GeneChip Scanner 3000 System with Hybridization Ovens & Autoloader


This was removed from a university lab where it was surplus to requirements.


The system powers up and the PC has the software installed. It connected to the system, and we were able to control the scanner from the PC.


Included are;


Affymetrix GeneChip Scanner & Autoloader

Top:-

Model - Autoloader

PN - 90-0351

SN - A07790

Bottom:-

Model - Scanner 3000

PN - 00-0073R

SN - 50202631

Powers on.


Affymetrix GeneChip Fluidics Station

Model - 400

PN - 800101

SN - FS1134

Powers on.


Affymetrix GeneChip Hybridization Oven

Model - 645

PN - 00-0331

SN - C0105100

Powers on with rotation speed up to 80rpm. The oven is in good working order.


Affymetrix GeneChip Hybridization Oven

Model - 640

SN - OVN 021550

Powers on with rotation speed running up to 85rpm. The oven is in good working order.


Image of item

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 5,000.00 (ex. VAT) 1 in stock

3 x Faulty Findlay Irvine Type: 292/16 Grip Testers Spares/Repairs

ITEM-29701

3 x Faulty Findlay Irvine Type: 292/16 Grip Testers Spares/Repairs


These were removed from a university lab where it was surplus to requirements.


The items are in reasonable cosmetic condition but have not been tested. All are incomplete, missing drawbars & one is missing the Front wheel, chain & signal Processing Unit.


They are sold for spares/repairs.


Image of item

£ 5,000.00 (ex. VAT) 1 in stock

Hitachi Transgenomic Wave L-7000 Series DHPLC System - L-7400 - L-7300 Lab

ITEM-36234

Hitachi Transgenomic Wave L-7000 Series DHPLC System


This was removed from a university lab where it was surplus to requirements.


All units power up but have not been tested further as they require connection to a PC with software.


Included are;


Transgenomic/Hitachi L-7400 UV Detector

Model: L-7400

Part#: 810-0401

Serial#: 1147-080


Transgenomic/Hitachi L-7300 Column Oven

Model: L-7300

Part#: 810-0301

Serial#: 1153-014


Transgenomic/Hitachi L-7200 Auto Sampler

Model: L-7200

Part#: 810-0201

Serial#: 1154-136


Transgenomic/Hitachi L-7200 Chiller

Model: L-7200 ACC

Part#: 810-3301

Serial#: 1134-036


Transgenomic/Hitachi L-7100 Pump

Model: L-7100

Part#: 810-0101

Serial#: 1153-228


Transgenomic/Hitachi D-7000 Interface

Model: D-7000IF

Part#: 810-0091

Serial#: 1124-131


ERC Inc Hitachi L-761 Pump Drive Unit/Degasser

Model: L-761

Serial#: 102895N0775


Additional items included:


Transgenomic Wave Ineractive Help System CD

Part#: 6700002


Transgenomic Wave System Software Accessories CD

Part#: 6700006


Transgenomic Wave System Software Accessories CD

Part#: 6700005


Transgenomic Manual Binder x 2


Image of item

£ 4,990.00 (ex. VAT) 1 in stock

CIF Technodrill 2 CNC Drilling & Milling Prototype Machine Lab

ITEM-23982

This CIF Technodrill 2 CNC Drilling & Milling Prototype Machine was removed from a university engineering department where it was surplus to requirements.


The item is in very good cosmetic condition. The lab said the machine is old technology but they believe it has never been used, having been purchased for an abandoned project some time ago. 


It powers up and is in working order.


It can be used for small-scale milling work, in particular, milling printed circuit board designs onto copper-clad FR4 board. It comes complete with a wheeled enclosure made from Aluminium T-slot/acrylic.


The item comes with Galaad 3 user manual, and Galaad 3 CAD-CAM-CNC software for windows as well as some unopened accessories.


Item is wired with EU plugs. An adaptor is needed.




Image of item

£ 4,970.00 (ex. VAT) 1 in stock

Sanyo MCO-20AIC CO2 Laboratory Incubator Double Stack MCO-20AIC lab

ITEM-30524

This was removed from a university lab where it was surplus to requirements.


Both incubators power up and have been tested at 5% CO2 and 37&50˚C with a temperature and CO2 sensor (not included). They are both in working order.


The incubators are in good cosmetic condition with only minor marks from use.


Top:-

Model - MCO-20AIC

SN - 01212236

External Dimensions - D72 W77 H102cm

Internal Dimensions - D51 W61 H66cm

4 Shelves - 45 x 58cm

1 Tray - 40 x 29 x 5cm


Bottom:-

Model - MCO-20AIC

SN - 60305034

External Dimensions - D72 W77 H102cm

Internal Dimensions - D51 W61 H66cm

4 Shelves - 45 x 58cm



Image of item

NEW ITEM

NEW ITEM

£ 4,965.00 (ex. VAT) 1 in stock

Radleys Reactor-Ready Pilot 20 Litre Jacketed Vessel Lab

ITEM-34995

Radleys Reactor-Ready Pilot 20 Litre Jacketed Vessel


This was removed from a university lab where it was surplus to requirements.


The unit is supplied in a wooden crate and is new and unused.


Image of item

£ 4,950.00 (ex. VAT) 1 in stock

Olympus Fluoview FV1000 System - Incomplete System - No Microscope Lab

ITEM-25672

This Olympus Fluoview FV1000 System was removed from a university lab where it was surplus to requirements.


Included are;


1x Olympus Fluoview

Model FV1000


The unit is in good cosmetic condition, but the power cables were missing so it has not been tested.


1x Olympus Transmitted Light Detector:

Model FV10-TD

The unit is in good cosmetic condition.


1x Olympus Control Box:

Model IX2 UCB

The unit powers on and is in good cosmetic condition.


1x Olympus Power Supply:

Model FV10-PSU

The unit powers on and is in good cosmetic condition.


1x FV10-PSU Key:

Model 1201


The unit is in good cosmetic condition.


1x Olympus Hand-switch:

Model U-HSTR2

The item powers on and is in a reasonable, used cosmetic condition.


1x Olympus Laser Diode Interface Controller:

Model FV10-LDIF

The unit is in good cosmetic condition. The PSU is missing.



1x Olympus Power Supply:

Model U-RFL-T200

Life Time: 3667 hours

The unit powers on and is in good cosmetic condition.


It is not known if the Burner has been replaced after 200 hours.


1x Olympus Mercury Light Source:

Model U-LH100G

The unit powers on and is in good cosmetic condition. The Lamp is working.


1x Olympus Light Source Stand

Model FV10-FIR

The unit is in good cosmetic condition. There are some scuffs and scratches from general use.


1x Olympus Power Supply:

Model FV5-LDPSU

Running hours: 79335.3


The unit powers on and is in good cosmetic condition.

I was unable to connect the head to the power supply as there is no cable that comes with the two units.


1x FV5-LDPSU Olympus Power Supply Key:

Model 1201

The unit is snapped. However, FV10-PSU key is the same model and fits the barrel of the FV5-LDPSU Olympus power supply.


1x Olympus Laser Head

Model LD405

The unit is in good cosmetic condition.

I was unable to connect the head to the power supply as there is no cable that comes with the two units, I could not test whether the laser head is responsive to the power supply.


1x IW-R3000N Rack Mountable Server Chassis

The unit powers on and is in good cosmetic condition.


Accessories:


1x Olympus objective correction cap

Model CAP-G0.5 ± 0.5

The unit is in good cosmetic condition


1x Olympus Laser safety shutter

Model F10-SHAUX

The unit is in good cosmetic condition.


1x Olympus Goose neck fibre optic light pipes

Model LGS3F1200UV

The unit is in good cosmetic condition.


Spacers:


2x L3cm xW3cm xH0.5cm


2x L4cm x W4cm x H0.5cm


The units are in good cosmetic condition.


Misc Accessories:


1x IW-R3000N Rack Mountable Server Chassis User manual V2.1

1x Microsoft Windows 2000 XP professional Inst/uninst CD

1x Belkin Serial Adaptor


1x RCA Phono male to male cable (sealed)

1x SATA Cable (C13214-001 FOXCON 0550)

1x 9 PIN S -Video to 3 RCA RGB TV HDTV adaptor cable


1x ATX 4 Pin Male to 8 Pin Female EPS power cable cord adaptor

1x RCA Female to mini DIN 8-PIN connector (sealed)

1x VGA to DVI connector (sealed)


Installation discs:

2x Belkin USB Adaptor Installation

1x Intel Express installer

1x Sapphire installation driver


1x mini disc




Image of item

£ 4,935.00 (ex. VAT) 1 in stock

Thermo Electron Heraeus Multifuge 4 KR Refrigerated Centrifuge with Rotor Lab

ITEM-31126

Thermo Electron Heraeus Multifuge 4 KR Refrigerated Centrifuge with Rotor


This was removed from a  lab where it was surplus to requirements.


The unit has been fully tested and is in full working order up to 4400rpm.


It is in good cosmetic condition but has a crack in the lid viewing window. It does not affect the operation.


Included with it are;


Sorvall Heraeus Rotor

75006476

Max 4400 rpm


4 x Sorvall Heraeus Buckets

75006477 F

Max 4400 rpm


Image of item

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 4,930.00 (ex. VAT) 1 in stock

Laser Quantum Finesse & FPU 35 Power Supply Lab Spares/Repairs

ITEM-23246

This Laser Quantum Finesse & FPU 35 Power Supply was removed from a university lab where it was surplus to requirements.


The power supply powers up. There is no umbilical cable included so we tested it with one from a working unit. We were unable to power the laser up.


The item is in good used cosmetic condition and comes in its original packaging.


Included are;


1 x Laser Quantum Finesse


1 x FPU 35 Power Supply

Model - Finesse 6W


It is sold for spares/repairs.





Image of item

£ 4,925.00 (ex. VAT) 1 in stock

Sanyo Type MCO-20AIC CO2 Laboratory Incubator Double-Stack lab

ITEM-30525

This was removed from a university lab where it was surplus to requirements.


Both incubators power up and have been tested at 5% CO2 and 37&50˚C with a temperature and CO2 sensor (not included). They are both in working order.


The incubators are in good cosmetic condition with only minor marks from use.


Top:-

Model - MCO-20AIC

SN - 01212218

External Dimensions - D72 W77 H102cm

Internal Dimensions - D51 W61 H66cm

4 Shelves - 45 x 58cm


Bottom:-

Model - MCO-20AIC

SN - 01212221

External Dimensions - D72 W77 H102cm

Internal Dimensions - D51 W61 H66cm

4 Shelves - 45 x 58cm



Items 161 to 180 of 3024

Filters

Price (£)

to

Condition