Items 341 to 360 of 3226

Image of item

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 3,925.00 (ex. VAT) 1 in stock

Bruker Ultraflex TOF/TOF Mass Spectrometer Lab Spares/Repairs

ITEM-38975

Bruker Ultraflex TOF/TOF Mass Spectrometer


This was removed from a university lab where it was surplus to requirements.


The unit powers up but has not been tested further at our facility.


The unit has some faults as confirmed by the lab


On arrival system was in fault mode with 'laser interlock' error. Restarted the laser through marathon control and tested. The laser started to fire but then the high voltage switched off. Tested HV supplies and found that the ISS could only reach 19kv instead of the required 25kv. Suddenly the system started working again and peaks were seen on the sample BUT the system has 2 issues that are intermittent.


1. 30kv supply

2. Laser


Image of item

£ 3,890.00 (ex. VAT) 1 in stock

Agilent 2100 Bioanalyzer System with Software & Accessories lab

ITEM-36028

Agilent 2100 Bioanalyzer System with Software & Accessories


This was removed from a university lab where it was surplus to requirements.


The unit powers up and passes all diagnostic tests when connected to the laptop. The unit does require a service as it has exceeded 1000 hours since the last one.


The included software has the licences for 2100 Electrophoresis & 2100 Instrument control.


The included IKA mixer is specific for the chips this system uses.


Includes:


-HP ProBook 6560b Laptop With Power Cable


-Agilent Bayonet Electrode Cartridge

Part no- 5065-4413


-Agilent test Chip Kit (Expired on 11/5/14)

Part no- G2938-68300


-Safe lock tubes


-14 RNA Nano Chips (Expired on 3/5/13)


-Electrode Cleaner


-STD Accessory Kit Series C


-All relevant guides, manuals and information booklets


-Agilent 2100 Expert Software


-Agilent Chip Priming Station With Syringes


-Agilent IKA MS 3 Vortexer

Model- MS 3 B S36


Image of item

£ 3,890.00 (ex. VAT) 1 in stock

Climet CI-154 1 CFM Particle Counter Lab

ITEM-36094

Climet CI-154 1 CFM Particle Counter


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in working order.


it is in good cosmetic condition with minor marks.

Image of item

£ 3,880.00 (ex. VAT) 1 in stock

Perkin Elmer Optima 2100 DV Optical Emission Spectrometer Lab

ITEM-30221

This Perkin Elmer Optima 2100 DV Optical Emission Spectrometer was removed from a university lab where it was surplus to requirements.


The instrument powers up but we were unable to test it further at our facility. The lab did inform us though, that it was fully working prior to removal.


It is in very good cosmetic condition with only minor marks from use.

Image of item

£ 3,860.00 (ex. VAT) 1 in stock

Thermo Scientific Multifuge X3R Benchtop Centrifuge with 4700rpm Rotor Lab

ITEM-31606

This Thermo Scientific Multifuge X3R Benchtop Centrifuge was removed from a university lab where it was surplus to requirements.


The unit powers up and is in full working order.


It is in excellent cosmetic condition with only minor marks from use.


Included with it is;


1 x Thermo Scientific Rotor Model No. 75003607


2x Swinging Buckets

Model 75003608

Max Load 800g

Max Speed 4700rpm

Max Cycle 70000 cycles


(2x) 5x50ml Tube Holders


2x Swinging trays/Microplate Buckets

75003617

Max load 500g

Max Speed 4700rpm

Max Cycle 120000 cycles


Autoclavable 121ºC


Image of item

£ 3,835.00 (ex. VAT) 1 in stock

Woods 63KO Variable Pitch Aeronautical Engineering Wind Testing Tunnel Lab

ITEM-23928

Woods 63KO Variable Pitch Aeronautical Engineering Wind Testing Tunnel


This was removed from a university engineering department where it was surplus to requirements.


The tunnel was dismantled when we collected so no testing was carried out, but we were told that it was still in operational condition prior to dismantling.


It is in five sections:


Section 1- Main Power/ Fan Unit.-405 kg. 120 cm x 120 cm x 150 cm. Outlet flanges 63 cm inside diameter. 3 phase 5 pin 415V motor.


Section 2- Silencer Unit- 160 kg. 127 cm x 91 cm x 131 cm. Flanges are 79 cm and 63 cm inside diameters.


Section 3- Air Intake Funnel- 155 kg. 170 cm x 121 cm x 145 cm .Apertures are 41cm x 41 cm and 80 cm x 80 cm.


Section 4- Large Tunnel Section-155 kg. 118 cm x 73 cm x 120 cm. Apertures are 41 cm x 41 cm and 64 cm diameter internal.


Section 5- Work Access Unit-85 kg. 55 cm x 55 cm x 160 cm. This has 8 openings 30 cm x 60 cm. It comes with a variety of doors, 8 in total.


Image of item

£ 3,825.00 (ex. VAT) 1 in stock

Applied Biosystems MagMAX Express 96 Particle Processor Type - 710 Lab

ITEM-31752

This Applied Biosystems MagMAX Express 96 Particle Processor was removed from a university lab where it was surplus to requirements.


The item powers on and is in good cosmetic condition with some marks from use. The table Rotation works, but we were unable to test it further without software.


Ambion MagMAX 96 Total RNA Isolation Kit Instruction Manual

12 x Processing Plate & Lid (PN-10038GA1)


Image of item

£ 3,820.00 (ex. VAT) 1 in stock

Beckman Coulter Avanti J-E Centrifuge

ITEM-35784

This Beckman Coulter Avanti J-E Centrifuge was removed from a university lab where it was surplus to requirements.


The unit powers up but we were unable to test it further as we do not have a compatible rotor in stock. We think it requires a rotor with a magnet fitted.


It is in good cosmetic condition with minor marks.

Image of item

£ 3,800.00 (ex. VAT) 1 in stock

Tecan RSP 5031 Robotic Sample Processor with Emka STC 8808 and IOS 3

ITEM-36505

Tecan RSP 5031 Robotic Sample Processor with Emka STC 8808 and IOS 3


This was removed from a university lab where it was surplus to requirements.


All the units power up but have not been tested further.


It is in good cosmetic condition with minor marks.


It is made up of the following modules;


1x Tecan RSP 5031 Robotic Sample Processor

S/N: 1652 JR


1x Emka STC 8808

S/N: 00454


1x Emka IOS 3

S/N: 00371


1x Emka Switching Unit

S/N: No serial number


1x Haake DC10 Circulator

Type: 003-2859

S/N: 1WDIN12879

Image of item

£ 3,785.00 (ex. VAT) 1 in stock

Olympus Fluoview FV1000 System - Incomplete System - No Microscope Lab

ITEM-25672

This Olympus Fluoview FV1000 System was removed from a university lab where it was surplus to requirements.


Included are;


1x Olympus Fluoview

Model FV1000


The unit is in good cosmetic condition, but the power cables were missing so it has not been tested.


The included PC powers up and has Olympus FV10-ASW Version 01.06.00.13 installed.


1x Olympus Transmitted Light Detector:

Model FV10-TD

The unit is in good cosmetic condition.


1x Olympus Control Box:

Model IX2 UCB

The unit powers on and is in good cosmetic condition.


1x Olympus Power Supply:

Model FV10-PSU

The unit powers on and is in good cosmetic condition.


1x FV10-PSU Key:

Model 1201


The unit is in good cosmetic condition.


1x Olympus Hand-switch:

Model U-HSTR2

The item powers on and is in a reasonable, used cosmetic condition.


1x Olympus Laser Diode Interface Controller:

Model FV10-LDIF

The unit is in good cosmetic condition. The PSU is missing.



1x Olympus Power Supply:

Model U-RFL-T200

Life Time: 3667 hours

The unit powers on and is in good cosmetic condition.


It is not known if the Burner has been replaced after 200 hours.


1x Olympus Mercury Light Source:

Model U-LH100G

The unit powers on and is in good cosmetic condition. The Lamp is working.


1x Olympus Light Source Stand

Model FV10-FIR

The unit is in good cosmetic condition. There are some scuffs and scratches from general use.


1x Olympus Power Supply:

Model FV5-LDPSU

Running hours: 79335.3


The unit powers on and is in good cosmetic condition.

I was unable to connect the head to the power supply as there is no cable that comes with the two units.


1x FV5-LDPSU Olympus Power Supply Key:

Model 1201

The unit is snapped. However, FV10-PSU key is the same model and fits the barrel of the FV5-LDPSU Olympus power supply.


1x Olympus Laser Head

Model LD405

The unit is in good cosmetic condition.

I was unable to connect the head to the power supply as there is no cable that comes with the two units, I could not test whether the laser head is responsive to the power supply.


1x IW-R3000N Rack Mountable Server Chassis

The unit powers on and is in good cosmetic condition.


Accessories:


1x Olympus objective correction cap

Model CAP-G0.5 ± 0.5

The unit is in good cosmetic condition


1x Olympus Laser safety shutter

Model F10-SHAUX

The unit is in good cosmetic condition.


1x Olympus Goose neck fibre optic light pipes

Model LGS3F1200UV

The unit is in good cosmetic condition.


Spacers:


2x L3cm xW3cm xH0.5cm


2x L4cm x W4cm x H0.5cm


The units are in good cosmetic condition.


Misc Accessories:


1x IW-R3000N Rack Mountable Server Chassis User manual V2.1

1x Microsoft Windows 2000 XP professional Inst/uninst CD

1x Belkin Serial Adaptor


1x RCA Phono male to male cable (sealed)

1x SATA Cable (C13214-001 FOXCON 0550)

1x 9 PIN S -Video to 3 RCA RGB TV HDTV adaptor cable


1x ATX 4 Pin Male to 8 Pin Female EPS power cable cord adaptor

1x RCA Female to mini DIN 8-PIN connector (sealed)

1x VGA to DVI connector (sealed)


Installation discs:

2x Belkin USB Adaptor Installation

1x Intel Express installer

1x Sapphire installation driver


1x mini disc



Image of item

£ 3,750.00 (ex. VAT) 1 in stock

Terumo Model TSCD-II Terumo Sterile Tubing Welder Lab

ITEM-41787

Terumo TSCD-II Terumo Sterile Tubing Welder Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powered on, we are unable to test it further at our facility.


Model: TSCD-II

REF: ME-SC203AH

Total Welds: 00000556

Next Service: 21/02/2024

Soft Version: S00017


Image of item

£ 3,715.00 (ex. VAT) 1 in stock

Beckman Coulter Allegra X-12R Centrifuge with SX4750 Rotor Lab

ITEM-36443

Beckman Coulter Allegra X-12R Centrifuge with SX4750 Rotor


This was removed from a working lab where it was surplus to requirements.


The unit powers up and is in good working order.


It is in good cosmetic condition with marks from use.


Included with it are;


1 x Beckman rotor 4x 750ml

S/N: 13 E 998

Max 4750 rpm


4 x Beckman swinging buckets: -


2x  SX4750 Plate Carrier 781 grams


2 x SX4750 / SX4750A 681 grams (4x50mL Tube Adapters)

(Retire 03-2018)


Image of item

£ 3,700.00 (ex. VAT) 1 in stock

Terumo TSCD-II Model Terumo Sterile Tubing Welder Lab

ITEM-41788

Terumo TSCD-II Terumo Sterile Tubing Welder Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powered on, we are unable to test it further at our facility.


Model: TSCD-II

S/N: 202004581

Total Welds: 00001203

Soft Version: S00017


Image of item

£ 3,690.00 (ex. VAT) 1 in stock

Solentim Cell Metric Cell Imaging and Analysis Instrument Lab

ITEM-31102

This Solentim Cell Metric Cell Imaging and Analysis Instrument was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good cosmetic condition with a minor scratch on the front.


The PSU is included.

Image of item

£ 3,670.00 (ex. VAT) 1 in stock

Scanna ScanMax 225 Mailroom Postal X-Ray Machine SMB225D2G20 Lab

ITEM-25311

Scanna ScanMax 225 Mail Room Security X-Ray Machine  Model - SMB225D2G20


This was removed from a university lab where it was surplus to requirements.


The unit powered up but we were unable to get the monitor to communicate with the onboard PC. It was not tested further.


It is in good cosmetic condition with only minor marks from use. It has a manual included with it.


Inside dimensions - D56.5 W42 H54cm




Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 3,655.00 (ex. VAT) 1 in stock

Boxer 200/100 L Laboratory Front Loading Laboratory Autoclave Lab

ITEM-23952

This Boxer 200/100 L Laboratory Autoclave was removed from a university lab where it was surplus to requirements.


The client had informed us that the unit is in 100% working order and has had little use.


It has now been professionally serviced and has been confirmed to be in full working order. It has passed all safety checks. Full report available on request.


The internal chamber is 39cm (L)x 59cm (W)x 39cm (H).


The unit is in very good condition with very few marks.

Image of item

£ 3,650.00 (ex. VAT) 1 in stock

Thermo Nicolet Avatar 360 FTIR System with PC & Software Lab

ITEM-17039

This Thermo Nicolet Avatar 360 FTIR System was removed from a university lab where it was surplus to requirements.


The lab assured us it was in working order prior to collection, but unfortunately, the Power supply was not supplied with the system, and is not included.


The PC powers on and has the following software on it.


Python 25

ARCGIS

MiniTab 15

Blue J

AsyMetrix.


The system is in reasonably good cosmetic condition but has marks from age and use.

Image of item

£ 3,650.00 (ex. VAT) 1 in stock

Terumo TSCD-II Terumo Sterile Tubing Welder Lab

ITEM-41786

Terumo TSCD-II Terumo Sterile Tubing Welder Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powered on, we are unable to test it further at our facility.


Model: TSCD-II

S/N: 202004580

REF: ME-SC203AH

Total Welds: 00001994


Image of item

SPARES/REPAIR ITEM

SPARES/REPAIR ITEM

£ 3,625.00 (ex. VAT) 1 in stock

Perkin Elmer Optima 7300 DV Optical Emission Spectrometer Lab Spares/Repairs

ITEM-31383

This Perkin Elmer Optima 7300 DV Optical Emission Spectrometer was removed from a university lab where it was surplus to requirements.


The lab advised us that this requires a new pneumatics board and is not functional.


It is in good cosmetic condition with minor marks from use.


It is sold for spares/repairs.

Image of item

£ 3,600.00 (ex. VAT) 1 in stock

Terumo Type TSCD-II Terumo Sterile Tubing Welder Lab

ITEM-41789

Terumo TSCD-II Terumo Sterile Tubing Welder Lab


This item was removed from a university where it was surplus to requirement.


It is in good cosmetic condition and powered on, we are unable to test it further at our facility.


Model: TSCD-II

S/N: 201808521

Total Welds: 00005367

Soft Version: S00017

Items 341 to 360 of 3226

Filters

Price (£)

to

Condition