All Products
Items 401 to 420 of 3068
£ 2,000.00 (ex. VAT) 1 in stock
MC-80 Water Cooling Manual Metallographic Cutting Machine w/ Stand
ITEM-39849
MC-80 Water Cooling Manual Metallographic Cutting Machine w/ Stand
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in reasonable cosmetic condition for this type of equipment, though it has been well used.
It has a 16amp 5 pin 3phase plug fitted.
£ 2,000.00 (ex. VAT) 1 in stock
Julabo F25-ED Refrigerated/Heating Circulator Water Bath Lab
ITEM-36532
Julabo F25-ED Refrigerated/Heating Circulator Water Bath
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. The digital thermometer was used for testing only and is not included.
It is in good cosmetic condition with minor marks.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 2,000.00 (ex. VAT) 1 in stock
48 x UNI-T UT804 True RMS Multimeters Lab
ITEM-24276
48 x UNI-T UT804 True RMS Multimeters
This job lot of items comes from a university lab, The items were no longer required.
None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.
None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.
They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.
The units have not been tested at all.
£ 2,000.00 (ex. VAT) 1 in stock
Julabo FS 18 MV Refrigerated/Heating Circulator Bath Lab
ITEM-35377
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. (Digital thermometer used for testing and is not included).
It is in good cosmetic condition with minor marks.
£ 2,000.00 (ex. VAT) 1 in stock
HOWE Refrigerated Solvent Trap Lab
ITEM-35550
HOWE Refrigerated Solvent Trap
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in working order.
It is in reasonable cosmetic condition with minor marks from use.
£ 2,000.00 (ex. VAT) 1 in stock
Watson Marlow 720s Peristaltic Pump Lab
ITEM-35896
This Watson Marlow 720s Peristaltic Pump was removed from a university lab where it was surplus to requirements.
The unit powers up (PSU included) and is in working order.
It is in good cosmetic condition with only minor marks.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 2,000.00 (ex. VAT) 1 in stock
Dionex ICS-90 Ion Chromatography System with AS-40 Autosampler Lab
ITEM-38973
Dionex ICS-90 Ion Chromatography System with AS-40 Autosampler
This was removed from a university lab where it was surplus to requirements.
The system has been professionally serviced. A full report is available on request.
It is in good cosmetic condition with minor marks.
Included are;
Dionex AS40 Automated Sampler
Model: AS40-1
Serial#: 04050451
Dionex ICS-90 Ion Chromatography System
Model: ICS-90
Serial#: 02040303
£ 2,000.00 (ex. VAT) 1 in stock
35 x G.W. Instek GPS-4303 DC Laboratory Power Supply Units Lab
ITEM-38309
35 x G.W. Instek GPS-4303 DC Laboratory Power Supply Units
This job lot of items comes from a university lab, The items were no longer required.
None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.
None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.
They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the unit. It is an excellent opportunity for anyone looking to benefit for individual equipment resale.
The units have not been tested at all.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 2,000.00 (ex. VAT) 1 in stock
LTE Scientific Falcon 30 Benchtop Laboratory Autoclave Lab
ITEM-31288
This LTE Scientific Falcon 30 Benchtop Laboratory Autoclave was removed from a university lab where it was surplus to requirements.
The unit has been professionally serviced and is in full working order. It has passed all safety checks. Full report available on request.
It is in overall good cosmetic condition but does have marks and stains from use.
Internal Dimensions - 42 x 22 x 27 cm
£ 1,990.00 (ex. VAT) 1 in stock
ILab 650 Clinical Chemistry System Automatic Biochemistry w/ PC & Software Lab
ITEM-23250
ILab 650 Clinical Chemistry System Automatic Biochemistry w/ PC & Software
This was removed from a university lab where it was surplus to requirements.
All the elements power up, but we were not able to get the the PC to communicate with the system. This may just be down to human error.
The front doors will not stay closed.
The unit comes with:-
Dell Optiplex PC
Acer Monitor
Microsoft Keyboard & Mouse
Epson Printer
ILab 650 Software
Operators Manual
Hose
Power Supply
£ 1,990.00 (ex. VAT) 1 in stock
Orbit Marine AL-7108-CCU Central Control Unit PN - L00120002 Lab
ITEM-30589
This Orbit Marine AL-7108-CCU Central Control Unit was removed from a university lab where it was surplus to requirements.
The item powers on and boots up with Orbit Marine tracking system software Version 4.84 10.12.2012 installed. It was tested with an external monitor (not included). The front panel is not a display screen.
It is in good cosmetic condition with marks from use.
RECERTIFIED ITEM
RECERTIFIED ITEM
£ 1,990.00 (ex. VAT) 1 in stock
Thermo Fisher MegaFuge 16R Benchtop Refrigerated Laboratory Centrifuge Lab
ITEM-23420
This Thermo MegaFuge 16R Benchtop Refrigerated Laboratory Centrifuge was removed from a university lab where it was surplus to requirements.
The unit has been recertified by a service engineer who has fully tested it. It is in full working order. It has had a brand new board fitted recently and has been thoroughly inspected.
It does not come with a rotor, but we can provide a quote for rotors such as TX-200 or TX-400, or others as required.
It is in excellent cosmetic condition with only minor marks from use.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,985.00 (ex. VAT) 1 in stock
Leica TCS SP 2 Confocal Microscope System - PC Comms Fault Lab
ITEM-19535
This Leica TCS SP 2 Confocal Microscope System was removed from a university lab due to a fault.
The university reported "Apparently it was a computer issue, in that the computer failed and would no longer talk to the confocal and nothing could be done to remedy the issue since Leica wont support it, I’m told the actual microscope and lasers are fine (if old!)"
From our assessment, the microscope appears to be fully working and it could be split from the main system and used on its own. The controllers etc for the automated stage also appeared to work fine. It is just the AOBS head and control system that doesn't want to communicate with the PC.
The system has been fully connected up at our facility. We have replaced the PCi card but that did not generate any success either.
When starting the Leica PC program it shows the following message:
"AOBS Crystal Ctrl (2)" reports 0 unlocked PLL channel(s)! Please lock channel(s) or reset controller.
The AOBS is the scanner head which is attached to the main control desk. We have also tried the system with another identical head that we have in stock. That gave us exactly the same result.
It is sold for spares/repairs.
Please note that the marble table in the photos was retained by the lab.
£ 1,980.00 (ex. VAT) 1 in stock
Airedale UCC70DSQ-2/1 Ultima Compact Chiller (2016) Air Cooled Liquid Chiller
ITEM-21175
This Airedale UCC70DSQ-2/1 Ultima Compact Chiller was removed from a university where it was reported as surplus to requirements. It appears to have been manufactured in 2016.
The unit has not been tested and will probably need to be inspected by a qualified engineer. It had been in storage for some time.
It is in fair condition with quite a few dents / bends in the metalwork on one face in particular.
We may be able to get an engineers assessment on this unit - we just have not arranged it as of yet.
£ 1,980.00 (ex. VAT) 1 in stock
Gerhardt Fibretherm FT12 Automated Fibre Analysis System Lab
ITEM-34880
This Gerhardt Fibretherm FT12 was removed from a university lab where it was surplus to requirements.
The unit powers up but requires an air compressor and dosing pump to be tested further. It is in good cosmetic condition with minor marks.
Model: FT 12
S/N: 4072778
Dimensions: 34/64/86cm
Weight: 40kg
230V AC 50-60hz
1900W 8,2A
IP 20
Additional items included:
Insert rack (carousel)
Insert rack (carousel) complete with quick clamping handle FIBRETHERM and 12x fixing cones EPDM
Boiling vessel
Boiling vessel FIBRETHERM, stainless steel, complete mounted with.: Stainless steel pot, Grip, glass ring, seal and centering PTFE
Assorted pipes, tubes and fittings.
£ 1,980.00 (ex. VAT) 1 in stock
New Brunswick Scientific Innova 4200 Shaker Incubator Lab
ITEM-35907
New Brunswick Scientific Innova 4200 Shaker Incubator
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. (Digitial thermometer not included).
It is in good cosmetic condition with marks from use.
1 x Shelf included 50 x 50cm
Max 450rpm
£ 1,975.00 (ex. VAT) 1 in stock
Matrix Technologies PlateMate 2x2 Automated Pipetting Workstation
ITEM-24231
Matrix Technologies PlateMate 2x2 Automated Pipetting Workstation
This was removed from a university lab where it was surplus to requirements.
The unit powers up and goes through all start-up sequences. It is in good cosmetic condition with minor marks.
It is fitted with a pipette head with 96 tips at 300µl.
£ 1,965.00 (ex. VAT) 1 in stock
Labcaire Model SC12R Recirculating Class II Safety Cabinet Lab
ITEM-38903
Labcaire Model SC12R Recirculating Class II Safety Cabinet
This was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order. No UV light is fitted.
It is in good cosmetic condition with minor marks.
It is supplied with a stand.
SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 1,960.00 (ex. VAT) 1 in stock
illumina HiSeq 2500 Genome Sequencer Lab Spares/Repairs
ITEM-29943
This illumina HiSeq 2500 Genome Sequencer was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good cosmetic condition with marks from use, but we were unable to test it further without software.
The client informed us that there are issues with the fluidics and has leaks.
It is sold for spares/repairs.
£ 1,950.00 (ex. VAT) 1 in stock
Woods Air Movement Series 28 Fan Wind Testing Tunnel 710/289/1/4
ITEM-21203
Woods Air Movement Series 28 Fan Wind Testing Tunnel 710/289/1/4
This unit came from an engineering university. It was used to develop and test for the motor industry. We were assured it was in good working order.
The Flange/Working Section External Dimension 56cm X 56cm
Included is a basic working section with two access panels. Approximate size of working section
56cm x 56cm X 100cm.
The Fan type is a K. Blackman 28 series.
The fan uses 7.5 kw Electric Motor with an inverter control.
It is split into 4 sections;
Unit 1- Main Fan/Control Unit- 130cmx130cmx175cm.-330 kg
Unit 2- Joint Section- 68cmx62cmx86cm.- 24 kg
Unit 3-Large Tunnel Section- 217 cmx77cmx149cm.- 150 kg
Unit 4- Work Access Unit- 57cmx54cmx81cm.- 22 kg.
Please enquire if you would like a delivery quote.
The last time when the nozzle calibration was ran for that tunnel and it went up to a measured airspeed of 26m/s (94km/h).
Items 401 to 420 of 3068