All Products

RECERTIFIED ITEM

£ 4,000.00 (ex. VAT) 1 in stock

Zeiss Axiovert 135 TV w/ XBO 75, Prior Motorised Stage & Control Lab

ITEM-39879

Zeiss Axiovert 135 TV w/ XBO 75, Prior Motorised Stage & Control Lab

This item was removed from a university lab where it was surplus to requirements.

It is in good cosmetic condition and powers on successfully, with both lamps functioning. All mechanical elements operate smoothly.

This microscope has been professionally serviced, the full service report is available on request.

No objectives are included.

Microscope Components:

Carl Zeiss Axio 3Fl Filter Slider
Filters: HQ, GFO, LP, BP 340, BP 380, FT 425, 500-530, FITC LP
Zeiss C-mount Camera Adapter (Model: 45 61 05)
Zeiss Phase Contrast Nomarski DIC LD Condenser (Model: 45 17 59)
Eyepieces: 2 x E-Pl 10x/20
Zeiss HAL Lamp House (Model: 44 72 17)
Zeiss Illuminator Lamp House (Model: 44 72 16)

Included Accessories and Additional Components:

Prior ProScan III

Model: V31XYZ
Serial#: 79693

Prior Control Panel (Joystick)

Model: PS3J100
Serial#: 80723

Prior Motorised Stage

Model: HK07X135
Serial#: 1991
Status: All items successfully communicate, with displays and LEDs fully functional. Includes motorised stage control via joystick, filter switching, and focus control. Does not feature a slide holder.

Zeiss XBO 75 Lamp Power Supply

Model: J0470X
Serial#: 1626
Status: Fully operational with correct cables for microscope connection. The hour clock was reset, showing only 30 minutes of use.

Marzhauser Wetzlar Stage

Model: EK 130x85 Axiovert 200
Serial#: 15042931
Status: Non-motorized stage.

£ 4,000.00 (ex. VAT) 1 in stock

Perkin Elmer ProXPRESS 2D Proteomic Imaging System Lab

ITEM-41352

Perkin Elmer ProXPRESS 2D Proteomic Imaging System Lab

This system was removed from a university where it was surplus to requirement.

It is in very good cosmetic condition and powers on.

The previous owner has notified us that this system is in full working order.

This system includes the following:

Pharmacia LKB VacuGene Pump
ProXPRESS 2D User's Guide
ProXpress Test Sheets
2950-2017 Gell Cassette Assy
2950-2019 UV Gel Adaptor (Sealed)
2950-2048 Calibration Sample Assy
PX2950-2006
2950-2049 Standard Wet Gel Cassette Assy
Phoretix Software
Proteome 1D Analyser Software and manual

£ 4,000.00 (ex. VAT) 1 in stock

Perkin Elmer Chemagic 360 Magnetic Separator Lab

ITEM-44783

Perkin Elmer Chemagic 360 Magnetic Separator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition.

Due to the absence of a monitor or computer, further functional testing could not be conducted.

Includes:

Manual
Cables
Plastic bottles

£ 4,000.00 (ex. VAT) 1 in stock

Jenway 6705 UV/Vis Spectrophotometer Lab

ITEM-44406

Jenway 6705 UV/Vis. Spectrophotometer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition other than some stress cracks present on the screen protector. This does not impair its functionality.

This item powers on and passes all self-diagnostic tests on start-up. The previous client stated it was in good working order prior to removal.

$Image of Rigaku Ultima III X-ray Diffractometer (XRD) w/SA-HEM3 6 Station Holder Lab$

£ 4,000.00 (ex. VAT) 1 in stock

Rigaku Ultima III X-ray Diffractometer (XRD) w/SA-HEM3 6 Station Holder Lab

ITEM-44950

Rigaku X-ray Diffractometer (XRD) Ultima III

This system was removed from a university lab where it was surplus to requirements.

The system is in reasonable used cosmetic condition. It has not been powered on at our site due to our on-site risk assessments surrounded X-Rays.

The unit was working when put into storage in 2018.

Various components and parts are included as listed below, along with a PC setup, although no Rigaku software programs appear to be installed on the PC.

However, there are the following software disks included:

Rigaku Basic Software (Cat No.: 9240J101)
Rigaku TTRAX3 and Ultima3 Software (Cat No.: 9240J101)
Rigaku Special Order Software (U30megaP) (Cat No.: 9999)

System Specifications:

Model: Ultima III
Cat No.: 2035M410
Serial No.: DD3654N

6 Station Holder
Model: SA-HEM3
Cat No.: 4057J101
Serial No.: 00563702

Patlite Beacon
Model: LMS-L (SN-06X03M)

Rigaku DC Motor Controller
SN: DD12866

Rigaku Long Fine Focus
Type: R01-29-0202
NC: 9430 022 73201
No. DK 402688

Rigaku CBO Cross Beam Optics
Cat No.: 2220B101
SN: DD12793

Additional Rigaku parts:

Cat No.: 5738E402 (SN-DD061813)
Cat No.: 2155G101 (SN-DD12804)
Cat No.: 4601K831 (SN-DD12154)
Cat No.: 4253A101 (SN-DD11586

Vexta Stopping Motor
Model: PK543-A
SN: UR70J32307

PC Setup:

Dell Optiplex 9020 with monitor, keyboard, and mouse
The PC is in working order with all passwords cleared. It contains a few Rigaku files, but no software programs appear to be installed.

Included Manuals/Software:

2 x Rigaku D/MAX 2000/PC Series Instruction Manual
X-Ray Diffractometer Instruction Manual
Rigaku Basic Software (Cat No.: 9240J101)
Rigaku TTRAX3 and Ultima3 Software (Cat No.: 9240J101)
Rigaku Special Order Software (U30megaP) (Cat No.: 9999)

Loose spare parts included:

Rigaku Cat No.: 2701E201 (SN-AD08851)
Container of round parts: Rigaku 900003 SH, w/Groove
2 x Small containers with unknown parts
Scintag Generator Key
Key labeled: "Microscope"
Container of small metals, including:
1 x Bag labeled "Silicon"
1 x 640d Silicon Powder
2 x Tubs UCAR Spectroscopic Powder
1 x Tub labeled "Tung Flake"
Approximately 20 x small containers of Silicon metal

£ 4,000.00 (ex. VAT) 1 in stock

Iskra PIO 2020 Class ll Microbiological Safety Cabinet Type MC18-2 Stand Lab

ITEM-42406

Iskra PIO Class ll Microbiological Safety Cabinet Type MC18-2 on Stand Lab

This item was removed from a university lab where it was surplus to requirement.

The cabinet is in excellent condition and good working order. The unit was fitted with a 3-pin plug for testing (not included).

Specifications;

Type MC18-2
Serial No. 200273_10
Year 2020
Airflow 0.4 m/s

Features;

2 x internal power outlets
2 x internal Ethernet sockets

NEW ITEM

£ 4,000.00 (ex. VAT) 1 in stock

PCO. EDGE.4.2 Bi. USB : Back Illuminated SCMOS Camera

ITEM-45576

PCO. EDGE.4.2 Bi. USB : Back Illuminated SCMOS Cameras

This item was removed from a university where it was surplus to requirement.

It is in brand-new condition and remains in its original packaging.

PSU adapter NOT included.

Key Features:

back illuminated 16 bit sCMOS sensor technology
adjustable down to -25 °C air & water cooling
high resolution 2048 x 2048 pixel
pixel size: 6.5 x 6.5 µm²
quantum efficiency up to 95 %
maximum frame rate 40 fps @ full resolution
dynamic range 26667 : 1
lowest dark current (typ.) 0.2 e-/pixel/s
rolling shutter
exposure times from 10 μs to 20 s
USB 3.1 Gen1 interface

£ 4,000.00 (ex. VAT) 1 in stock

Peak Scientific Infinity 1031 Nitrogen Gas Generator

ITEM-42497

Peak Scientific Infinity 1031 Nitrogen Gas Generator

This item was removed from a university lab where it was surplus to requirement.

It is in very good cosmetic condition, we are unable to test it at our facility.

Includes a physical copy of the user manual.

Specification;

Serial No. 771041055
Fitted with filter model No. 02-5009
Year 2017
Top filter element 00-0046
Bottom filter element 00-0045

£ 4,000.00 (ex. VAT) 1 in stock

Andre Zailkin TM3 Capping Machine

ITEM-46910

Andre Zailkin TM3 Capping Machine

This item was removed from a university lab where it was surplus to requirement.

It is in good cosmetic condition and powers up, we are unable to test it further at our facility.

£ 4,000.00 (ex. VAT) 1 in stock

Gilden Photonics fluoroSENS Fluorimeter w/ Sens-J1 Microplate Reader Lab

ITEM-46260

Gilden Photonics fluoroSENS Fluorimeter w/ Sens-J1 Microplate Reader Lab

This system was removed from a university lab where it was surplus to requirement.

Both units are in good cosmetic condition, the FluoroSENS Gilden Photonics powers on, we are unable to test it further at our facility.

The Sens-J1 has not been tested, as it requires connecting to a PC with relevant software.

This system also includes the required manual/

£ 4,000.00 (ex. VAT) 1 in stock

Leica DM2500 Confocal Microscope System w/ Application Suite X Software Lab

ITEM-31569

Leica DM2500 Confocal Microscope System w/ Application Suite X Software Lab

This system was removed from a laboratory where it was surplus to requirements.

The client has stated the following: "The systems are fully working and Leica still offer user support for the systems if the new owners so wish. "

The system is in good cosmetic condition.

All units power up and communicate through the included Leica Application Suite X software.

However, there is no camera included, so microscope images cannot currently be viewed via the PC.

The system consists of:

1 x Leica DM2500 microscope
Fitted with:
1 x Leica 1531144511 Stage
1 x Leica 11504058 Lamp
1 x Leica 15-6504-202 Light Supply
1 x Leica 1531323 Mirror Junction Box
2 x Leica 507802 HC PLAN 10x/20 Eyepieces
1 x Leica 507902 ACS APO 10x/0.30 CS Objective
1 x Leica 507900 ACS APO 63x/1.30 OIL CS Objective
1 x Leica EL6000 BZ02 with Lightpipe (LCD screen may be faulty, lamp timer not functional)
1 x Leica TCS SPE Laser Head with Leica Supply Unit RGBV
1 x Life Imaging Services 'the box' environmental chamber (with 2 x hoses)
1 x Speirs Robertson Isolation Plate (75cm x 90cm x 5.5cm)
1 x HP Z420 PC with 2 x Monitors, Keyboard & Mouse (running Leica Application Suite X 3.1.2.16221)
Includes Leica TCS SPE to SPE II USB licence stick

SPARES/REPAIR ITEM

£ 4,000.00 (ex. VAT) 1 in stock

Bruker MicrOTOF ll Time-Of-Flight Mass Spectrometer Lab

ITEM-42272

Bruker MicrOTOF II Time-Of-Flight Mass Spectrometer

This item was removed from a university laboratory where it was surplus to requirements.

The spectrometer powers on and is in good cosmetic condition, with a few very small marks on the outer casing.

A loss of MS signal was reported to Bruker in August 2022. After replacing the glass capillary, the issue was temporarily resolved but re-occurred in October 2022. Bruker advised replacing the MS source door and the roughing pump.

Due to the required MS source door and roughing pump, this system is not functional and is listed as Spares/Repair.

Includes:

1 x new Bruker 8236619 maintenance kit (air filter, hydrocarbon trap, oil backing pump oil, exhaust filter cartridge, and filter mat)
4 x data cables
4 x U-bend stainless steel 1/2" pipes
1 x air 90˚ elbow connector 1"

Serial No.: 823175010435

NEW ITEM

£ 4,000.00 (ex. VAT) 1 in stock

New Eppendorf CryoCube F101h Ultra Low temperature Freezer Lab

ITEM-42772

Eppendorf CryoCube F101h Ultra Low Temperature Freezer

This item was removed from a university laboratory where it was surplus to requirements.

It is brand new in its original packaging.

The unit has a capacity of 101 litres and can reach a minimum temperature of -86°C.

Includes:

Original packing list
Operator manual
Keys

Model: F101h-86

Serial No.: F101JQ050955

NEW ITEM

£ 4,000.00 (ex. VAT) 1 in stock

New Eppendorf CryoCube Model F101h Ultra Low temperature Freezer Lab

ITEM-42773

Eppendorf CryoCube F101h Ultra Low Temperature Freezer

This item was removed from a university laboratory where it was surplus to requirements.

It is brand new in its original packaging.

The unit has a capacity of 101 litres and can reach a minimum temperature of -86°C.

Includes:

Original packing list
Operator manual
Keys

Model: F101h-86

Serial No.: F101JQ050855

£ 3,950.00 (ex. VAT) 1 in stock

Sim-Aminco French Pressure Cell Press FA078E Lab

ITEM-36541

Sim-Aminco French Pressure Cell Press FA078E

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in reasonably good cosmetic condition with some marks and rust.

£ 3,925.00 (ex. VAT) 1 in stock

TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab

ITEM-36247

TWI Large Electric Control Panel with 5 x A3200 Aerotech Servo Drivers Lab

This was removed from a university lab where it was surplus to requirements.

The cabinet contains the following items.

Aerotech A3200 Ndrive CP x 5

Serial#1:577057/7

Serial#2:577057/6

Serial#3:681834/7

Serial#4:681834/8

Serial#5:681834/2

All appear to be in really good cosmetic condition with no damage. Two of the units are not inside the cabinet.

National Instruments Signal Conditioning Connector Block x 2

Model: SC-2345

Both have stickers on the front of the items

Sicker on item 1: pH Sensor

Sticker on item 2: Thermocouples Inlet/Outlet Drive Relays

There are other small electrical switches and controllers inside.

£ 3,825.00 (ex. VAT) 1 in stock

Applied Biosystems MagMAX Express 96 Particle Processor Type - 710 Lab

ITEM-31752

This Applied Biosystems MagMAX Express 96 Particle Processor was removed from a university lab where it was surplus to requirements.

The item powers on and is in good cosmetic condition with some marks from use. The table Rotation works, but we were unable to test it further without software.

Ambion MagMAX 96 Total RNA Isolation Kit Instruction Manual

12 x Processing Plate & Lid (PN-10038GA1)

£ 3,820.00 (ex. VAT) 1 in stock

Beckman Coulter Avanti J-E Centrifuge

ITEM-35784

This Beckman Coulter Avanti J-E Centrifuge was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further as we do not have a compatible rotor in stock. We think it requires a rotor with a magnet fitted.

It is in good cosmetic condition with minor marks.

RECERTIFIED ITEM

£ 3,800.00 (ex. VAT) 1 in stock

Thermo Scientific MaxQ 6000 Incubator Shaker SHKE6000-1CE Lab

ITEM-31545

Thermo Scientific MaxQ 6000 Incubator Shaker SHKE6000-1CE

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been extensively tested. It is in full working order.

It is in good cosmetic condition with minor marks.

This is the non-refrigerated model of this incubator.

£ 3,800.00 (ex. VAT) 1 in stock

Nikon Eclipse TE300 Inverted Fluorescence Microscope System w/ 20x/0.50 Ph1 Lab

ITEM-36255

Nikon Eclipse TE300 Inverted Fluorescence Microscope System Lab

This was removed from a university lab where it was surplus to requirements.

This system is in good cosmetic condition with all included units in working order.

1 x Nikon Eclipse TE300 body fitted with:

1 x Nikon 065851 multi position binocular neck.

1 x Nikon manual stage.

1 x Nikon filter holder, no filters fitted.

1 x Nikon Condenser Turret fitted with 1 x LWD ∞ Ph3 & 1 x Blanking plate.

The other 3 blanking plates are missing.

1 x Nikon LWD 0.52

2 x Nikon CFI 10x/22 eyepieces.

1 x Nikon Plan Flour

20x/0.50

Ph1 DLL

Objective.

1 x Nikon LHS-H100P-1 Halogen 12v 100w Lamp.

1 x Nikon TE-PSE100 Power supply with control cable.

1 x Nikon LH-M100C-1 Mercury 100w Lamp. (Run hours not known, bulb will require replacement).

1 x Nikon C-SHG1 Power Supply. (Run time counter reset).

£ 3,800.00 (ex. VAT) 1 in stock

Thermo Scientific MSC-Advantage MSC 1.5 Class 2 Safety Cabinet with Stand Lab

ITEM-42342

Thermo Scientific MSC-Advantage MSC 1.5 Class 2 Safety Cabinet with Stand

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in very good cosmetic condition. The unit displayed 23,459 running hours. It is in good working order. (Socket tester not included.)

Includes:

Full-width stand (supplied flat-packed) with a 68cm platform height
8 bolts for assembly

Order No.: 51028722

Serial No.: 41526996

Year: 2013

£ 3,800.00 (ex. VAT) 1 in stock

Tecan RSP 5031 Robotic Sample Processor with Emka STC 8808 and IOS 3

ITEM-36505

Tecan RSP 5031 Robotic Sample Processor with Emka STC 8808 and IOS 3

This was removed from a university lab where it was surplus to requirements.

All the units power up but have not been tested further.

It is in good cosmetic condition with minor marks.

It is made up of the following modules;

1x Tecan RSP 5031 Robotic Sample Processor

S/N: 1652 JR

1x Emka STC 8808

S/N: 00454

1x Emka IOS 3

S/N: 00371

1x Emka Switching Unit

S/N: No serial number

1x Haake DC10 Circulator

Type: 003-2859

S/N: 1WDIN12879

£ 3,785.00 (ex. VAT) 1 in stock

Olympus Fluoview FV1000 System - Incomplete System - No Microscope Lab

ITEM-25672

This Olympus Fluoview FV1000 System was removed from a university lab where it was surplus to requirements.

Included are;

1x Olympus Fluoview

Model FV1000

The unit is in good cosmetic condition, but the power cables were missing so it has not been tested.

The included PC powers up and has Olympus FV10-ASW Version 01.06.00.13 installed.

1x Olympus Transmitted Light Detector:

Model FV10-TD

The unit is in good cosmetic condition.

1x Olympus Control Box:

Model IX2 UCB

The unit powers on and is in good cosmetic condition.

1x Olympus Power Supply:

Model FV10-PSU

The unit powers on and is in good cosmetic condition.

1x FV10-PSU Key:

Model 1201

The unit is in good cosmetic condition.

1x Olympus Hand-switch:

Model U-HSTR2

The item powers on and is in a reasonable, used cosmetic condition.

1x Olympus Laser Diode Interface Controller:

Model FV10-LDIF

The unit is in good cosmetic condition. The PSU is missing.

1x Olympus Power Supply:

Model U-RFL-T200

Life Time: 3667 hours

The unit powers on and is in good cosmetic condition.

It is not known if the Burner has been replaced after 200 hours.

1x Olympus Mercury Light Source:

Model U-LH100G

The unit powers on and is in good cosmetic condition. The Lamp is working.

1x Olympus Light Source Stand

Model FV10-FIR

The unit is in good cosmetic condition. There are some scuffs and scratches from general use.

1x Olympus Power Supply:

Model FV5-LDPSU

Running hours: 79335.3

The unit powers on and is in good cosmetic condition.

I was unable to connect the head to the power supply as there is no cable that comes with the two units.

1x FV5-LDPSU Olympus Power Supply Key:

Model 1201

The unit is snapped. However, FV10-PSU key is the same model and fits the barrel of the FV5-LDPSU Olympus power supply.

1x Olympus Laser Head

Model LD405

The unit is in good cosmetic condition.

I was unable to connect the head to the power supply as there is no cable that comes with the two units, I could not test whether the laser head is responsive to the power supply.

1x IW-R3000N Rack Mountable Server Chassis

The unit powers on and is in good cosmetic condition.

Accessories:

1x Olympus objective correction cap

Model CAP-G0.5 ± 0.5

The unit is in good cosmetic condition

1x Olympus Laser safety shutter

Model F10-SHAUX

The unit is in good cosmetic condition.

1x Olympus Goose neck fibre optic light pipes

Model LGS3F1200UV

The unit is in good cosmetic condition.

Spacers:

2x L3cm xW3cm xH0.5cm

2x L4cm x W4cm x H0.5cm

The units are in good cosmetic condition.

Misc Accessories:

1x IW-R3000N Rack Mountable Server Chassis User manual V2.1

1x Microsoft Windows 2000 XP professional Inst/uninst CD

1x Belkin Serial Adaptor

1x RCA Phono male to male cable (sealed)

1x SATA Cable (C13214-001 FOXCON 0550)

1x 9 PIN S -Video to 3 RCA RGB TV HDTV adaptor cable

1x ATX 4 Pin Male to 8 Pin Female EPS power cable cord adaptor

1x RCA Female to mini DIN 8-PIN connector (sealed)

1x VGA to DVI connector (sealed)

Installation discs:

2x Belkin USB Adaptor Installation

1x Intel Express installer

1x Sapphire installation driver

1x mini disc

£ 3,750.00 (ex. VAT) 1 in stock

Thermo Scientific MSC-Advantage MSC 1.5 Class 2 Safety Cabinet with Stand Lab

ITEM-42343

Thermo Scientific MSC-Advantage MSC 1.5 Class 2 Safety Cabinet with Stand

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in very good cosmetic condition. The unit displayed 21,110 running hours. It is in good working order. (Socket tester not included.)

Includes:

Full-width stand (supplied flat-packed) with a 68cm platform height
8 bolts for assembly

Order No.: 51028722

Serial No.: 41545966

Year: 2013

£ 3,750.00 (ex. VAT) 1 in stock

International Metrology Systems MS Impact Coordinate Measuring Machine Lab

ITEM-23978

International Metrology Systems MS Impact Coordinate Measuring Machine

This was removed from a university lab where it was surplus to requirements.

We were unable to test it at our facility but the lab confirmed that it was working prior to removal.

It has a Renishaw Probe Head Controller PHC10-2 and Virtual-DMIS Version 3.2 and Version 4.0 software discs which run it.

£ 3,540.00 (ex. VAT) 1 in stock

Constant Cell Disruption Systems Z2/40/AA/AA Cell Disruptor Lab

ITEM-31255

This Constant Cell Disruption Systems Z2/40/AA/AA Cell Disruptor was removed from a university lab where it was surplus to requirements.

The system powers up and is in reasonably good cosmetic condition with minor marks from previous use.

Main unit - L70 W58 H77cm

Frame - L68 W54 H57cm

£ POA 1 in stock

Panasonic MCO-170AICD-PE CO2 Incubator Lab

ITEM-39064

This item is new in stock. Please enquire for further details.

£ 3,500.00 (ex. VAT) 1 in stock

PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab

ITEM-38000

PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order. It has been fully temperature and CO2 tested.

It is in very good cosmetic condition internally and externally.

This item includes the following:

3 x Shelves: 47 x 45 cm

1 x Humidity Water Tray: 44 x 25 x 7 cm

NEW ITEM

£ 3,500.00 (ex. VAT) 1 in stock

Zeta Programable Guillotine Cutter GCI-800 Lab

ITEM-34773

Zeta Programable Guillotine Cutter GCI-800

This item was removed from a university where it was surplus to requirement.

It is brand new in its original packaging.

The Item powers on and performs as intended.

All items included:

1x Zeta Programable Guillotine Cutter GCI-800

S/N: GC1800-190601

1x Set of Allen keys.

1x Philips screwdriver

1x Lubricating oil.

1x User manual.

£ 3,500.00 (ex. VAT) 1 in stock

Julabo F1000 Recirculating Chiller Lab

ITEM-41568

Julabo F1000 Recirculating Cooler Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and has been fully tested. It is in good working order. (Thermometer used for testing not included).

It is in good cosmetic condition.

£ 3,500.00 (ex. VAT) 1 in stock

Pair of Sport System Hydroplay Official S04106 Competition Basketball Goals

ITEM-45643

Pair of Sport System Hydroplay Official S04106 Competition Basketball Goals

These Competition Basketball Goals are sold on behalf of a University in Scotland.

The previous client has notified us that these items are in very good condition with little use.

This mobile basketball system features two mobile and two stationary wheels that retract or extend when the unit is lifted or lowered. It includes a 15 cm thick shield covered with synthetic, washable material and tempered safety glass boards with protected lower edges.

The complete system weighs approximately 1050 kg and includes:

Two tempered safety glass boards (180x105 cm, 12 mm thick) with edge covers
Two basketball rings with nets
Rear plates for anchoring to the floor

Specifications:

Projection: 325 cm
Required setting length: 425 cm
Dimensions when folded: 410x185x170 cm

The system complies with FIBA standards (Level 1).

This item will require collection from: UHI Perth, located in Perth, Scotland.

These can either be sold as a pair or individually.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

£ 3,500.00 (ex. VAT) 1 in stock

Buehler Delta Abrasimet Abrasive Cutter Lab Model No: 10-2155-400

ITEM-34740

Buehler Delta Abrasimet Abrasive Cutter Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The workshop has fitted a plug for testing, it will be removed before the sale and will need one fitting or hard wiring on arrival.

Clamp dimensions: 8cm x 4cm.

Disc dimensions: 9.5in/23.5cm.

Disc expiry date: 05/2019.

£ 3,500.00 (ex. VAT) 1 in stock

Safelab AirOne Blue AB900GS Recirculating Fume Cabinet Lab

ITEM-46864

Safelab AirOne Blue AB900GS Fume Cupboard Lab

Manufacture Year: 2001

This item is sold on behalf of a client. It is surplus to requirements.

It is in good cosmetic condition and full working order. It was regularly serviced until 2024.

It is available for collection from Devon, UK, but we may be able to offer shipping for an additional fee.

The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

RECERTIFIED ITEM

£ 3,500.00 (ex. VAT) 1 in stock

Boxer Front Loading Benchtop Autoclave Lab

ITEM-24842

Boxer Front Loading Autoclave

This was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in good working order.

It is in reasonable cosmetic condition but has marks from use.

£ 3,500.00 (ex. VAT) 1 in stock

Micromeritics Gemini Surface Area Pore Size Analyser w/ Flow Prep 60 Lab

ITEM-37160

Micromeritics Gemini w/ Flow Prep 60

These items were removed from a university lab where they were surplus to requirements.

Both power up but have not been tested further.

They are both in good cosmetic condition, with minor marks from use.

All items included;

1x Micromeritics Flow Prep 60:

Model FlowPrep 060 LB

1x Micromeritics Gemini:

ModelGemini

1x Micromeritics Gemini Remote:

Model 2360

1x Micromeritics Memory Card

Model Gemini 2360

£ 3,500.00 (ex. VAT) 1 in stock

Leybold Trivac D40B & RUvac WAU251 Vacuum System Lab

ITEM-34933

Leybold Trivac D40B & RUvac WAU251 Vacuum System

This item was removed from a university laboratory where it was surplus to requirements.

This item is a combination of Leybold Trivac D40B and RUVAC WAU251 3-phase vacuum pumps. According to the previous owner, both units are in working condition; however, no further testing has been conducted on-site.

Specifications:

Leybold RUVAC:

Type: WAU251
Catalog No.: 11721
Serial No.: B891200093

Leybold TRIVAC:

Type: D40B
Catalog No.: 112 86
Serial No.: A881100069

SPARES/REPAIR ITEM

£ 3,500.00 (ex. VAT) 1 in stock

Shimadzu ICPE-9000 Plasma Spectrometer w/ ASC-6100 System Spares/Repair Lab

ITEM-42401

Shimadzu ICPE-9000 Plasma Spectrometer with ASC-6100 Autosampler and Additional Equipment

This system was removed from a university lab where it was surplus to requirement.

The Shimadzu ICPE-9000 and ASC-6100 Autosampler are in very good cosmetic condition. The ICPE-9000 did not power on due to previous hard wiring. The autosampler powered on successfully, completing a self-test cycle.

Both Van Der Heijden chillers powered on, displaying ambient temperatures.

The Gast vacuum pump powered on, demonstrating strong vacuum force.

Notes from Previous Owner:

'The Shimadzu ICPE-9000 is not in working order due to a potential issue with the power supply unit. Some components may still function and could be repairable.'

Due to the above-listed comment, this system is listed as Spares/Repair.

Included;

Shimadzu ICPE-9000 Plasma Spectrometer

Cat No.: 211-86000-92
Serial No.: B41844400092X2

Shimadzu ASC-6100 Autosampler

Serial No.: A30324503132 OP

Van Der Heijden Minore Water Chiller

Model: Minore 0-R102
Serial No.: 1685 07
Year: 2007

Van Der Heijden Luftikus Water Chiller

Serial No.: 1182 07

Ulvac Vacuum Pump

Model: GLD-040
Serial No.: 0684468
Year: 2006

Gast Vacuum Pump

Model: DOA-V130-BN
Serial No.: 0004702804

Laboratory Table

Dimensions: 180 x 80 x 75 cm (length x width x height)
Features: Mobile, with four large castors and stabilising feet, extruded aluminium frame, waterproof laminated top

Included Accessories:

4 meters of 9 x 15 mm plastic water hose with an inline solenoid valve
1.5 meters of Tygon R-3603 pipe
4 data cables
4 meters of Parker Parflex 1/4" O.D. high-temperature pipe
1 x 400 ml can of Ambersil Leak Detector spray

£ 3,500.00 (ex. VAT) 1 in stock

Priorclave PS/QCS/SV100 Top Loading Autoclave Lab

ITEM-35118

Priorclave PS/QCS/SV100 Top Loading Autoclave

This was removed from a university lab where it was surpus to requirements.

The unit powers up but has only been partially tested as it requires a steam generator, which we do not have.

It is in good cosmetic condition with minor marks.

£ 3,500.00 (ex. VAT) 1 in stock

Priorclave Model PS/QCS/SV100 Top Loading Autoclave Lab

ITEM-35119

Priorclave PS/QCS/SV100 Top Loading Autoclave

This was removed from a university lab where it was surpus to requirements.

The unit powers up but has only been partially tested as it requires a steam generator, which we do not have.

It is in good cosmetic condition with minor marks.

£ 3,500.00 (ex. VAT) 1 in stock

Atlas Copco GA18 Compressor Lab

ITEM-34938

Atlas Copco GA18 Compressor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The lab said it was functional prior to removal

£ 3,500.00 (ex. VAT) 1 in stock

Peqlab PeqSTAR 96X (Standard) Thermal Cycler Lab

ITEM-36305

Peqlab PeqSTAR 96X (Standard) Thermal Cycler

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

£ 3,500.00 (ex. VAT) 1 in stock

PHCBI CO2 Incubator Model - MCO-170AICD-PE Lab

ITEM-37998

PHCBI CO2 Incubator Model - MCO-170AICD-PE Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

Also includes the following:

1 x Shelf: 47 x 45 cm

£ 3,500.00 (ex. VAT) 1 in stock

New Brunswick Scientific Innova 4330 Refrigerated Incubator Shaker Lab

ITEM-39182

This New Brunswick Scientific Innova 4330 Refrigerated Shaking Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and the incubator and shaker have both been tested (digital thermometer not included). It is in full working order.

It is in reasonably good cosmetic condition, with signs of use.

Internal Dimensions: 87 x 56 x 34 cm

RECERTIFIED ITEM

£ 3,500.00 (ex. VAT) 1 in stock

Priorclave Tactrol 2 PS/QCS/EH150 Laboratory Autoclave Lab

ITEM-25467

This Priorclave Tactrol 2 Autoclave Type - PS/QCS/EH150 was removed from a university lab where it was surplus to requirements.

The unit has been professionally serviced and is in full working order. A report is available on request.

It is in good cosmetic condition with marks from use.

£ 3,500.00 (ex. VAT) 1 in stock

Terumo TSCD-II Type Terumo Sterile Tubing Welder Lab

ITEM-41790

Terumo TSCD-II Terumo Sterile Tubing Welder Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powered on, we are unable to test it further at our facility.

Model: SC-203AH

S/N: 2007-04016

Total Welds: 00006003

Soft Version: S00015

£ 3,500.00 (ex. VAT) 1 in stock

Thermo Scientific Surveyor MSQ Plus Mass Spectrometer System Lab

ITEM-38437

Thermo Scientific Surveyor MSQ Plus Mass Spectrometer System

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes:

HAZMAT-0100045 Calmix Working Solution Bottle

Expires : 11/30/2023

£ 3,500.00 (ex. VAT) 1 in stock

Edwards Model iQDP80 Dry Vacuum Pump Lab

ITEM-38003

Edwards iQDP80 Dry Vacuum Pump

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, but we have been advised by the previous owner that it is not in working order, therefore, it is listed as Spares/Repair.

Serial No.: M109880

Model: 3XIQDP80

Manufacturing Date: 21.11.00

Power supply cable & control module not included.

£ 3,500.00 (ex. VAT) 1 in stock

Huber CC 415 Refrigerated Heating Bath Circulator Lab

ITEM-44614

Huber CC 415 Circulating Chiller Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

£ 3,500.00 (ex. VAT) 1 in stock

Perkin Elmer Janus Automated Workstation With Accessories Lab

ITEM-44645

Perkin Elmer Janus Automated Workstation With Accessories Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on.

WinPrep software is available for setup with a PC upon customer request.

Also included:

1 x Perkin Elmer Peri Pump

1 x Perkin Elmer Vaspian Arm

2 x Waste Bottles

£ 3,500.00 (ex. VAT) 1 in stock

Zeiss Axioplan 2ie MOT Fluorescence Microscope w/ 4 Objectives Lab

ITEM-39934

Zeiss Axioplan 2 Fluorescence Microscope w/ 4 Objectives Lab

This item was removed from a university where it was surplus to requirement.

The unit appears to be functioning well and can also be controlled via the free MicroManager software.

It is in good cosmetic condition.

It does feature the following:

2x Eyepieces PL 10 x 25

P/N: 44 40 34

2x Zeiss Plan-NEOFLUAR 40x/0.75 ∞/0.17

P/N: 44 03 51

P/N 44 03 50

1x Zeiss FLUAR 100x/1.30 oil ∞/0.17

P/N: 44 02 85

1x Zeiss Plan-NEOFLUAR 63x/1.25 oil ∞/0.17

P/N: 44 04 60

1x Carl Zeiss HAL 100 12v 100w lamp house

P/N: 1039-685

1x Zeiss Reflector Turret with 6 filters

1x FITC

1x TRITC

1x YFP

1x CFP

1x Cy5

1x DAPI

All Products

Filters