All Products
Items 461 to 480 of 3024

£ 2,225.00 (ex. VAT) 1 in stock
Eppendorf epMotion 5070 Automated Pipetting Workstation + Spare Heads Lab
ITEM-20641
This Eppendorf epMotion 5070 System was removed from a university lab where it was surplus to requirements. The lab assured us the system was in fully working order with three spare pipetting heads.
The unit is in good used cosmetic condition but it does have various scrapes and scratches from general use. The rear of the unit near the IEC input appears to be a bit dented in but it does not affect the operation of the unit at all.
The unit has been powered up and the head returns to its home position. The initialisation ran fine during start-up.
It is running 6.002 Software. And apAplication 1.111.
The system consists of:
1 x Eppendorf epMotion 5070 unit.
Which is fitted with:
1 x TS1000 40-1000ul Single-Chanel Dispensing Tool and also comes with a controller pad.
It comes with the following accessories:
1 x Eppendorf Holder For 6 Dispensing Tools.
1 x Eppendorf 0.5 + Adapter/1.5/2ml
1 x Eppendorf 55mm Height Adapter.
1 x Eppendorf Thermorack CB100ul
1 x Eppendorf Module Reservoir.
3 x Extra Boxed Dispensing Heads:
1 x TS50 1-50ul Single-Chanel Dispensing Tool.
1 x TS300 20-300ul Single-Chanel Dispensing Tool.
1 x TM50-8 1-50ul Eight-Chanel Dispensing Tool.
And the following consumables:
4 x Boxes of epT.I.P.S. Motion 1 - 50ul.
Plus 2 individual units.
10 x Boxes of epT.I.P.S. Motion 20 - 300ul.
1 x Box of epMotion Reservoir 100ml.
3 x Boxes of epT.I.P.S. Motion 40 - 1000ul.
Plus 2 individual units.
Some boxes are still sealed.
Some might have had some units removed.

£ 2,225.00 (ex. VAT) 1 in stock
Kurabo FlexStar Automated DNA Isolation System Lab. Bought for £90k in 2015.
ITEM-09739
This system is being sold on behalf of one of our university customers.
The system is in full working order, complete with software, and was purchased in October 2015 for £90,000+VAT.
If you are interested in the system and have any questions or want to make an offer please just get in touch.

£ 2,215.00 (ex. VAT) 1 in stock
Struers LaboPol-1 Polishing Machine Lab
ITEM-34939
This Struers LaboPol-1 Polishing Machine was removed from a university lab where it was surplus to requirements.
The unit powers up and is in good working order.
It is in reasonable cosmetic condition but is well used.

£ 2,210.00 (ex. VAT) 1 in stock
Metrohm 718 STAT Titrino & 728 Stirrer - Titration System Lab
ITEM-35114
Metrohm 718 STAT Titrino & 728 Stirrer - Titration System
This was removed from a university lab where it was surplus to requirements.
Included are;
Metrohm 718 STAT Titrino with 718 Keyboard
No. 1718001013122
Powers on
Metrohm 728 Stirrer
No. 172800106338A
Powers on with stirrer working to dial setting.
Metrohm LL Unitrode Pt1000 (Boxed)
No. 00590206
1 x Manual
The system is in good cosmetic condition with marks from use.

£ 2,200.00 (ex. VAT) 1 in stock
Beckman Coulter Epics XL.MCL Cell Counter Flow Cytometer 4 Colour Lab
ITEM-16944
This Beckman Coulter Epics XL.MCL Cell Counter was removed from a university lab where it was surplus to requirements.
The system powers up but has not been tested further.
It is in good cosmetic condition but has some marks from use.

£ 2,200.00 (ex. VAT) 1 in stock
Peak Robotics Kinedx KX-300-470 Robot Stacker Microplate Handler PAA SCARA
ITEM-15691
This Peak Robotics Kinedx KX-300-470 Robot Stacker Microplate Handler Robotic Arm was removed from a university where it was surplus to requirements.
The lab assured us this unit was in good working order.
The unit appears to be in good, used cosmetic condition, and it powers up fine, the pump also seems to be working. We were unable to test it any further.
Also included is;
Jun-Air OF-302 Pump and 25 Litre Tank.
MetroLogic Orbit Scanner.
KX-300 PSU.
And various other parts and accessories.
The unit is a PAA SCARA running Overlord 3 software which is supplied on a USB stick. When we tried to install this software we got a request for a get-code. We have not investigated this further.

£ 2,200.00 (ex. VAT) 1 in stock
Thermo Scientific CRYOPLUS 2 Liquid Nitrogen Storage System Lab
ITEM-19550
This unit was removed from a lab during a clearout. The unit requires LN2 to be properly tested which we do not have at our site so the unit has not been tested by us. However we anticipate that it should be in good working order.
Lockable freezer
Powers on
In good condition with a few scuffs and scratches and surface rust.
Partial damage to the rubber seal on RHS of the lid of the freezer.
Functioning buttons
Freezer lock Key supplied
Button lock keys supplied
Easy to move around on four rotating wheels.
Please note if you encounter any issues with this unit within 45 days of delivery we can of course offer a full refund in exchange of return of the equipment but we cannot cover costs for lost nitrogen, samples, or other consequential loss.

£ POA 1 in stock
Amersham Biosciences AKTA Prime FPLC System Ph/C-900 Lab
ITEM-31779
This item is new in stock. Please enquire for further details.

£ 2,180.00 (ex. VAT) 1 in stock
Profile Pro 8000 Module Chassis with 8x WDM sources & Key Lab
ITEM-28391
This Profile Pro 8000 Module Chassis was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition.
Revision. 4.44
Interface: 1.22
8x WDM sources
It comes with;
1 x Kaba Micro- E Key Model No. ED9001

£ 2,180.00 (ex. VAT) 1 in stock
S&M CAHN 28 Automatic Electro Microbalance Model 10028E Lab
ITEM-20190
This S&M CAHN 28 Automatic Electro Microbalance Model 10028E was removed from a university lab where it was surplus to requirements.
The unit powers up but the lamp is not working. E3 appears on the screen when pressing the CAL button. Placing weights on the scales generates numbers but they do not match the weights placed. It probably needs some sort of calibration. It was not tested further.

£ 2,180.00 (ex. VAT) 1 in stock
Bio-Rad Universal Hood II XRS Imaging System with PC, Software & Camera Lab
ITEM-25629
This Bio-Rad Universal Hood II Imaging System with PC, Software & Camera was removed from a university lab where it was surplus to requirements.
The system is in working order. The dongle is missing but it will run in basic mode.
Included in the system are;
1 x Bio-Rad Universal Hood II
Powers on with both white & UV lights working.
1 x CoolSnap HQ2 Firewire Camera.
SN - A06J835032
Lens - 1:1.2/12.5-75
1 x Bio-Rad PC - The correct drivers for the HQ2 were installed on the PC. We were able to obtain an image and everything appears to work as it should. The Gel Doc now operates as an XRS unit in the software.
Other PC equipment:-
Dell Monitor
Microsoft Keyboard & Mouse
Cables
The item is in a reasonable, used cosmetic condition with marks from use.

£ 2,180.00 (ex. VAT) 1 in stock
TCR TECORA Echo HiVol Hi Volume Sampler System with Accessories Lab
ITEM-24617
TCR TECORA Echo HiVol Hi Volume Sampler System with Accessories
This was removed from a university lab where it was surplus to requirements.
The system consists of;
1 x Echo HiVol Hi Volume Sampler
Model, Echo Hi Vol
110V
The unit powers on and is in good cosmetic condition. It was powered on by our Step down from the mains supply (not included).
The buttons seem a little slow to respond and there are some tape marks and scuffs and scratches around the unit from general use. The unit is lockable but no key is supplied. It is a barrel lock with the number 252. The barrel is easy to change and it should be easy to find a 252 key.
1 x Delta Wireless Sampler
Electronic Flow Sampler w/ Battery pack
Model Delta
110V
The unit powers on and is in good cosmetic condition. We did not charge Battery to test, as we used our Step down from the mains supply. (not included).
1 x Delta Battery pack
The unit is in good cosmetic condition. It was not tested.
1 x Flight Case
There is a large crack at the top of the flight case, but inside the case is in good cosmetic condition.
Accessories:
All the Accessories are housed in a flight case
1x TCR Fine PM Air Inlet - PM10 200 l/min
1X Pair of Marigold industrial gloves (Size 9)
1x Metal Dome
2x Glass chambers
4x keys
1x High Volume Sampler for micropollutants Instruction Manual
1x Delta Wireless Instruction Manual
1x 16A -4h 100-130v 3pin IEC adaptor plug
1x length of clear tubing 9.8mm outer diameter x 5.6mm inner diameter
1x tripod arm with three prong grip
1x widget-HO59
1X Delta Quick Guide
1x TCR Tecora Delta Sampling config sheet
1x bag of Flowmeter GR & GRV spares
1x Metal Filter attachment
The system was not tested further.

£ 2,175.00 (ex. VAT) 1 in stock
Sanyo CO2 Laboratory Incubator Double Stack MCO-17AI Lab
ITEM-32020
This Sanyo CO2 Laboratory Incubator Double Stack MCO-17AI was removed from a university lab where it was surplus to requirements.
The units were both tested with a CO2 and Temperature sensor. They are in good working order but will need to be calibrated on installation.
They are in good cosmetic condition with minor marks from use.
Top:-
Model - MCO-17AI
SN - 60402577
External dimensions - L70 W63 H90cm
Internal dimensions - L50 W48 H66cm
4 Shelves - 45 x 45cm
Net Weight - 91kg
Bottom:-
Model - MCO-17AI
SN - 60804910
External dimensions - L70 W63 H90cm
Internal dimensions - L50 W48 H66cm
4 Shelves - 45 x 45cm
Net Weight - 91kg

£ 2,170.00 (ex. VAT) 1 in stock
Gynkotek UVD 170S HPLC System with PC & Chromeleon Software Lab
ITEM-22040
This Gynkotek UVD 170S HPLC System was removed from a university lab where it was surplus to requirements.
The items are in reasonable cosmetic condition.
All elements of the system power up but we were unable to test it at our facility. The lab confirmed that it was working when last used in 2018.
There is a PC included with Chromeleon Software CD 6.4 SP2 installed.
Included with it are;
1x GynkoSoft Chromatography Data System Reference Manual
1x GynkoSoft Chromatography Data System User Guide
1x GynkoSoft System Suitability Test Instructions
1x GynkoSoft Release Notes version 5.42

£ 2,170.00 (ex. VAT) 1 in stock
Binder Double Door Laboratory Oven Model - FD 240 Lab
ITEM-19988
This Binder Double Door Laboratory Oven Model - FD 240 was removed from a university lab where it was surplus to requirements.
The unit powers on and is in good cosmetic condition. It is in full working order.
It is in good cosmetic condition with some minor marks from use. It has had a brand new control knob and thermostat fitted recently.
Inside dimensions - D50 x W80x H60cm
2 Shelves - 45 x 79cm

SPARES/REPAIR ITEM
SPARES/REPAIR ITEM
£ 2,170.00 (ex. VAT) 1 in stock
Bruker Ultraflex III LRF200 - CID Mass Spectrometer Lab Spares/Repairs
ITEM-30225
This Bruker Ultraflex III LRF200 - CID Mass Spectrometer was removed from a university lab where it was surplus to requirements.
The unit powers up but has a fault either with the MALDI source applied voltage, or the power supplies. The voltage on in the ion source plate is not reaching the set point of 25kV and is giving an error.
This could be
1. Source contamination. The source has been cleaned and will be cleaned again, but it only takes a trace of deposited carbon to cause a discharge. A thorough clean may fix it or a replacement source block.
2. High voltage power supply issue
The item is in reasonable, used cosmetic condition but the left-hand side panel/door is out of line so doesn't close properly. Both front and back bottom panels were removed to adjust the feet to move the unit around on its wheels.
It is sold for spares/repairs due to the fault.

£ 2,165.00 (ex. VAT) 1 in stock
Illumina iScan SY-101-1001 Array Scanner with Newport Isolation System & UPS Lab
ITEM-19301
This Illumina iScan SY-101-1001 Array Scanner with Newport Isolation System & UPS was removed from a university lab where it was surplus to requirements.
Included are;
1 x Illumina iScan SY-101-1001 Array Scanner - The unit powers up but was not tested further.
1 x Newport Benchtop Vibration Isolation System
1 x Powervar Uninterruptable Power Supply - Model ABCE800-22B - The unit powers up but was not tested further.
1 x Monitor Arm Stand
There are other misc cables with this, but please note there is no PC or software included.
Everything is in good cosmetic condition with minor marks from use.

RECERTIFIED ITEM
RECERTIFIED ITEM
£ 2,165.00 (ex. VAT) 1 in stock
Bio-Rad ChemiDoc MP Imaging System Universal Hood III Lab
ITEM-25816
This Bio-Rad ChemiDoc MP Imaging System was removed from a university lab where it was surplus to requirements.
This system has been tested by a service engineer. It is in full working order. The Chemidoc has been calibrated and will display images from the camera via the Image Lab software.
1 x Bio-Rad Chemidoc MP
1 x Dell Optiplex 7010 with monitor, keyboard & mouse.
Fresh install of Windows 7.
Also installed is Bio-Rad Image Lab Version 6.1.0 Build 7 Standard Edition.

£ POA 1 in stock
Edwards nXds 10i Scroll Pump
ITEM-30425
This item is new in stock. Please enquire for further details.

£ 2,150.00 (ex. VAT) 1 in stock
Carbolite Laboratory Furnace Type VCF 12/5 Lab
ITEM-30288
This Carbolite Laboratory Furnace Type VCF 12/5 was removed from a university lab where it was surplus to requirements.
The unit powers up and is in full working order.
It is in reasonably good cosmetic condition but has some marks from use.
Items 461 to 480 of 3024