Nikon Eclipse TE300 Inverted Fluorescence Microscope System Lab

This was removed from a university lab where it was surplus to requirements.

This system is in good cosmetic condition with all included units in working order.

1 x Nikon Eclipse TE300 body fitted with:

1 x Nikon 065851 multi position binocular neck.

1 x Nikon manual stage.

1 x Nikon filter holder, no filters fitted.

1 x Nikon Condenser Turret fitted with 1 x LWD ∞ Ph3 & 1 x Blanking plate.

The other 3 blanking plates are missing.

1 x Nikon LWD 0.52

2 x Nikon CFI 10x/22 eyepieces.

1 x Nikon Plan Flour

20x/0.50

Ph1 DLL

Objective.

1 x Nikon LHS-H100P-1 Halogen 12v 100w Lamp.

1 x Nikon TE-PSE100 Power supply with control cable.

1 x Nikon LH-M100C-1 Mercury 100w Lamp. (Run hours not known, bulb will require replacement).

1 x Nikon C-SHG1 Power Supply. (Run time counter reset).

This Olympus Fluoview FV1000 System was removed from a university lab where it was surplus to requirements.

Included are;

1x Olympus Fluoview

Model FV1000

The unit is in good cosmetic condition, but the power cables were missing so it has not been tested.

The included PC powers up and has Olympus FV10-ASW Version 01.06.00.13 installed.

1x Olympus Transmitted Light Detector:

Model FV10-TD

The unit is in good cosmetic condition.

1x Olympus Control Box:

Model IX2 UCB

The unit powers on and is in good cosmetic condition.

1x Olympus Power Supply:

Model FV10-PSU

The unit powers on and is in good cosmetic condition.

1x FV10-PSU Key:

Model 1201

The unit is in good cosmetic condition.

1x Olympus Hand-switch:

Model U-HSTR2

The item powers on and is in a reasonable, used cosmetic condition.

1x Olympus Laser Diode Interface Controller:

Model FV10-LDIF

The unit is in good cosmetic condition. The PSU is missing.

1x Olympus Power Supply:

Model U-RFL-T200

Life Time: 3667 hours

The unit powers on and is in good cosmetic condition.

It is not known if the Burner has been replaced after 200 hours.

1x Olympus Mercury Light Source:

Model U-LH100G

The unit powers on and is in good cosmetic condition. The Lamp is working.

1x Olympus Light Source Stand

Model FV10-FIR

The unit is in good cosmetic condition. There are some scuffs and scratches from general use.

1x Olympus Power Supply:

Model FV5-LDPSU

Running hours: 79335.3

The unit powers on and is in good cosmetic condition.

I was unable to connect the head to the power supply as there is no cable that comes with the two units.

1x FV5-LDPSU Olympus Power Supply Key:

Model 1201

The unit is snapped. However, FV10-PSU key is the same model and fits the barrel of the FV5-LDPSU Olympus power supply.

1x Olympus Laser Head

Model LD405

The unit is in good cosmetic condition.

I was unable to connect the head to the power supply as there is no cable that comes with the two units, I could not test whether the laser head is responsive to the power supply.

1x IW-R3000N Rack Mountable Server Chassis

The unit powers on and is in good cosmetic condition.

Accessories:

1x Olympus objective correction cap

Model CAP-G0.5 ± 0.5

The unit is in good cosmetic condition

1x Olympus Laser safety shutter

Model F10-SHAUX

The unit is in good cosmetic condition.

1x Olympus Goose neck fibre optic light pipes

Model LGS3F1200UV

The unit is in good cosmetic condition.

Spacers:

2x L3cm xW3cm xH0.5cm

2x L4cm x W4cm x H0.5cm

The units are in good cosmetic condition.

Misc Accessories:

1x IW-R3000N Rack Mountable Server Chassis User manual V2.1

1x Microsoft Windows 2000 XP professional Inst/uninst CD

1x Belkin Serial Adaptor

1x RCA Phono male to male cable (sealed)

1x SATA Cable (C13214-001 FOXCON 0550)

1x 9 PIN S -Video to 3 RCA RGB TV HDTV adaptor cable

1x ATX 4 Pin Male to 8 Pin Female EPS power cable cord adaptor

1x RCA Female to mini DIN 8-PIN connector (sealed)

1x VGA to DVI connector (sealed)

Installation discs:

2x Belkin USB Adaptor Installation

1x Intel Express installer

1x Sapphire installation driver

1x mini disc

Europa Scientific ANCA NT System & 20-20 Stable Isotope Analyser

This was removed from a university lab where it was surplus to requirements.

The system powers up but we were unable to test it further without the PC and software.

The screen on the unit doesn't come on but we are advised that the little screens on the front of ANCA NT’s have never worked. They don’t affect the ability to use the instrument.

Included are;

1 x Europa Scientific ANCA NT System

1 x Stable Isotope Analyser

Model - 20/20

SN - 9007-072

Powers on

This Solentim Cell Metric Cell Imaging and Analysis Instrument was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with a minor scratch on the front.

The PSU is included.

Terumo TSCD-II Terumo Sterile Tubing Welder Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powered on, we are unable to test it further at our facility.

Model: TSCD-II

S/N: 202004580

REF: ME-SC203AH

Total Welds: 00001994

Terumo TSCD-II Terumo Sterile Tubing Welder Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powered on, we are unable to test it further at our facility.

Model: TSCD-II

S/N: 201808521

Total Welds: 00005367

Soft Version: S00017

New Brunswick Scientific C760 Innova Ultra Low Freezer Chest Freezer

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition internally and externally.

Included with the freezer are various rack units:

18 x 13 compartment rack 14 x 14 x 76cm

14 x 9 compartment rack 18 x 12 x 63cm

2 x 10 compartment rack 16 x 16 x 64cm

2 x 10 compartment rack 15 x 16 x 67cm

2 x 10 compartment rack 14 x 14 x 59cm

2 x 9 tray rack 14 x 14 x 50cm

BD FACSCanto Flow Cytometer System with PC, Software, and Accessories

This system was removed from a university laboratory where it was surplus to requirements.

The system includes a BD FACSCanto Flow Cytometer, Fluidics Cart, and a complete PC setup with software and manuals. The system was fully assembled and tested for startup; it communicates well.

It will require installation by a qualified engineer.

Components:

BD FACSCanto Flow Cytometer

• Catalog No.: 335860
• Serial No.: V0059-Model 1

BD FACSCanto Fluidics Cart

• Catalog No.: 335863
• Serial No.: N/A
• Powers on, with rust on the back.
• Included Bottles:
• Waste Bottle
• DI Water Bottle
• BD FACSRinse (REF 340346)
• 2 x BD FACSClean (REF 340345)

PC & Accessories:

• HP Z240 PC: Powers on, software installed.
• Sony 23" Monitor: Powers on.
• HP Mouse and Keyboard.
• Cables: 2 x Ethernet cables, 1 x Comms cable.
• Windows 7 has been installed and a new copy of FACSDiva 8.0.2.

Included Software and Manuals:

• Dongle
• CompuCyte Quantitative Imaging Cytometry Software
• BD FACS Academy Introduction to Flow Cytometry CD
• 2 x BD FACSCanto System Software CDs
• BD Cytometer Set Up & Tracking Application Guide
• BD FACSDiva Software Quick Start Guide
• Getting Started with BD FACSDiva Software Manual
• BD FACSCanto Safety & Limitations Manual
• BD High Throughput Sampler Safety & Limitations Manual
• FACSCalibur Training Manual
• BD FACSCanto Workbooks (Yellow Folders)

Thermo Scientific Surveyor MSQ Plus Mass Spectrometer System

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes:

HAZMAT-0100045 Calmix Working Solution Bottle

Expires : 11/30/2023

Julabo F1000 Recirculating Cooler Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and has been fully tested. It is in good working order. (Thermometer used for testing not included).

It is in good cosmetic condition.

Newport ST Series Smart Table UT2 Isolation Table with Jun-Air Compressor

This item was removed from a university lab where it was surplus to requirements.

The system powers on and is in very good cosmetic condition. The Jun-Air compressor functions as expected, and the isolator legs inflate correctly, raising the support columns to create a stable, vibration-free platform.

Specifications:

• Table Size: 180 x 150 cm
• Table Top Depth: 20 cm
• Standing Height: 90 cm
• Matrix: 72 x 60 M6 threaded holes, 25mm spacing
• Rear Hole: 10 cm diameter for apparatus suspension

Jun-Air 3-4 Compressor:

• Model: 3-4
• Serial No.: 712025
• Year: 2010
• Rated Pressure: 16 bar
• Receiver Tank Capacity: 4 litres

Included:

• Approx. 80ml of Jun-Air SJ-27 compressor oil
• All necessary airlines and connectors to integrate the air system with the isolator legs.

Sartorius Arium Comfort 1 Water Purification System with Arium Bagtank 20

This item was removed from a university laboratory where it was surplus to requirements.

The system is in very good cosmetic condition.

The purifier powered on and displayed the software version, completing a system check. The check flagged that a service, filter replacement, and calibration are due.The system otherwise appears to be in working order.

Installed Water Filters:

• 1 x Arium Comfort Kit H20-C-PACK (use by 10/24)
• 1 x Arium Pre-treatment Cartridge H20-CPFCO-1 (use by 11/24)
• 2 x Arium RO Module 613CPM4 (use by 04/25)

Included:

• 1 x new and unused Arium Comfort Pre-treatment Cartridge H20-CPFCO-1 (use by 06/25)
• 1 x sealed Arium Comfort Kit H20-C-PACK (use by 10/25)
• 1 x sealed Standard Arium Bag 20 litres Midisart/top tube H20-CBS-20 (manufactured 10/23)
• 1 x sealed Arium Cleaning Set H20-CCS (use by 05/26)
• 2 x sealed Arium Sterile Plus Sartopore 2150
• 1 x User Manual
• 4 x pipe fitting tools
• 4 x hose pipes for tank, feed, and drain connections

Specifications:

• Output: 8 litres/hour Type 3
• Feed Pressure: 2.0 to 6.9 bar
• UV Lamp
• Model: H20-1-2-TOC-T
• Serial No.: 28303896
• Software Version: V03.04
• Arium Bagtank 20
• Model: H20-AOV-20
• Serial No.: 28002473
• Capacity: 20 litres

Leybold Trivac D40B & RUvac WAU251 Vacuum System

This item was removed from a university laboratory where it was surplus to requirements.

This item is a combination of Leybold Trivac D40B and RUVAC WAU251 3-phase vacuum pumps. According to the previous owner, both units are in working condition; however, no further testing has been conducted on-site.

Specifications:

Leybold RUVAC:

• Type: WAU251
• Catalog No.: 11721
• Serial No.: B891200093

Leybold TRIVAC:

• Type: D40B
• Catalog No.: 112 86
• Serial No.: A881100069

Perkin Elmer Janus Automated Workstation With Accessories Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on.

WinPrep software is available for setup with a PC upon customer request.

Also included:

1 x Perkin Elmer Peri Pump

1 x Perkin Elmer Vaspian Arm

2 x Waste Bottles

Peqlab PeqSTAR 96X (Standard) Thermal Cycler

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

Jasco J-810 Spectropolarimeter

This item was removed from a university laboratory where it was surplus to requirements.

The spectropolarimeter powers on and is in good cosmetic condition with signs of regular use. Further testing has not been conducted.

Includes:

• Model FM0-427S, Serial No.: A001760993
• Model CDF-426S, Serial No.: A003460844

Main Unit Specifications:

• Model: J-810-150S
• Serial No.: B037160750

Buchi Rotavapor R-300 EL Rotary Evaporator with B-300 B-305 Bath & Base + Pump

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition and powered on without issue. The control pad is fully functional, and all aspects of operation are performing as intended.

The bath heater has been temperature tested (thermometer not included).

Includes:

• B-300 Master Switch for heating bath (S/N: 1000333352)
• B-305 Bath (S/N: 1000334743)
• V-300 Vacuum Pump (S/N: 1000335136)

Hewlett Packard 1100 Series HPLC System, G1322A, G1312A, G1313A, G1315A Lab

This system was removed from a university lab where it was surplus to requirement.

All included units are in reasonably good cosmetic condition and power on independently, we are unable to test them as a system at our facility.

This system comprises the following:

1 x ALS-G1313A-DE82206357

1 x BinPump-G1312A-DE83102889

1 x Degasser-G1322A-JP03924665

1 x Degasser-G1322A-JP73013168

1 x DAD-G1315A-DE82204388

1 x ColComp-G1316A-DE02206870

Huber CC 415 Circulating Chiller Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

New Brunswick Scientific C760 Innova Ultra Low Freezer ULT Chest Freezer Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in good cosmetic condition internally and externally.

Included with the freezer are five rack units:

2 x 16 compartment 24 x 14 x 56cm

2 x 16 compartment 26 x 14 x 56cm

1 x 2 compartment 29 x 29 x 56cm

Leica DMR Type 020-525.735 Fluorescence Microscope Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on with the bottom-mounted lamp in good working order.

We are unable to test the top-mounted lamp as the required power supply is not included.

Includes with the microscope are the following:

• Leica MPS 60 Camera
• Leica ∞/0.17 C Plan 100x/1.25 Oil Objective
• Leica ∞/-/A N Plan 5x/0.12 Objective
• 504058 Leica Illuminator
• Leica 807-072.057 Lamp Module (damaged)
• Box of misc tools and accessories

Beckman Coulter BioMek NXp Laboratory Automation System Lab

This system was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers up.

The system includes the following:

• Software
• PC and monitor
• Manual
• 40 x boxes of 10 racks of P20 pipette tips
• 8 boxes of 10 racks of P250 pipette tips
• 1 x Biomek valve Unit
• 1 x Inheco TEC Control 96/RS232
• 1 x Biomek Modular Reservoir Quarter Module 40mL Capacity (48 reservoirs)
• 1 x Biomek Modular Reservoir Half Module 75mL Capacity (24 reservoirs)
• Box of tubing
• Box of spare parts and accessories
• 1 x light curtain test rod

Zeiss Axioplan 2 Fluorescence Microscope w/ 4 Objectives Lab

This item was removed from a university where it was surplus to requirement.

The unit appears to be functioning well and can also be controlled via the free MicroManager software.

It is in good cosmetic condition.

It does feature the following:

2x Eyepieces PL 10 x 25

P/N: 44 40 34

2x Zeiss Plan-NEOFLUAR 40x/0.75 ∞/0.17

P/N: 44 03 51

P/N 44 03 50

1x Zeiss FLUAR 100x/1.30 oil ∞/0.17

P/N: 44 02 85

1x Zeiss Plan-NEOFLUAR 63x/1.25 oil ∞/0.17

P/N: 44 04 60

1x Carl Zeiss HAL 100 12v 100w lamp house

P/N: 1039-685

1x Zeiss Reflector Turret with 6 filters

1x FITC

1x TRITC

1x YFP

1x CFP

1x Cy5

1x DAPI

Edwards iQDP80 Dry Vacuum Pump

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition, but we have been advised by the previous owner that it is not in working order, therefore, it is listed as Spares/Repair.

Serial No.: M109880

Model: 3XIQDP80

Manufacturing Date: 21.11.00

Power supply cable & control module not included.

PHCBI CO2 Incubator Model - MCO-170AICD-PE Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

Also includes the following:

1 x Shelf:  47 x 45 cm

Micromeritics Gemini w/ Flow Prep 60

These items were removed from a university lab where they were surplus to requirements.

Both power up but have not been tested further.

They are both in good cosmetic condition, with minor marks from use.

All items included;

1x Micromeritics Flow Prep 60:

Model FlowPrep 060 LB

1x Micromeritics Gemini:

ModelGemini

1x Micromeritics Gemini Remote:

Model 2360

1x Micromeritics Memory Card

Model Gemini 2360

Zeiss Axioplan 2 Fluorescence Microscope

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

It is made up of the following modules;

Carl Zeiss Axioplan 2 Fluorescence Microscope

S/N: 3511001506

Eyepieces:

2 x Zeiss Pl 10 x 25

P/N: 44 40 34

1x 6 position nosepiece, fitted with 4 objectives:

1x Zeiss Plan-NEOFLUAR 40x/0.75 ∞/0.17

P/N: 44 03 50 02

1x Zeiss EC Plan-NEOFLUAR 100x/1.30 oil ∞/0.17

P/N: 440480-9903

1x Zeiss APOCHROMAT 10x/0.45 ∞/0.17

P/N: 1063-139

1x Zeiss EC Plan-NEOFLUAR 63x/1.25 oil ∞/0.17

P/N: 440460-9904

All additional parts:

1x Zeiss Reflector Turret 322 Synchroflex T 2.5 5/500 with 8x filters:-

1x BF

1x S Gr 1

1x DAPI

1x Tex Red

1x S Or

1x S Aqua

1x Cy5

1x Cy5.5

1x Marzhauser Scan8 Mechanical/Motorised Stage:

P/N: 42-24-407-0000

S/N: 03110373

1x Princeton Instruments Digital Camera

M/N: RTE/CCD-1300-Y/ES

S/N: M059850 7360-01-19

1x Princeton Instruments MicroMax Camera System:

M/N: ST-133

S/N: M059849

1x Carl Zeiss HBO 100 lamp house

P/N: 1007-980

1x Carl Zeiss HAL 100 12v 100w lamp house

P/N: 1039-685

1x LEJ ebq 100 lamp power supply showing 2650 hours of use

S/N: N01415645

2x Iris Stop Slider

P/N: 1062-360

3x Connection cables

1x Zeiss microscope cover

Atlas Copco GA18 Compressor Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

The lab said it was functional prior to removal

Buehler Delta Abrasimet Abrasive Cutter Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The workshop has fitted a plug for testing, it will be removed before the sale and will need one fitting or hard wiring on arrival.

Clamp dimensions: 8cm x 4cm.

Disc dimensions: 9.5in/23.5cm.

Disc expiry date: 05/2019.

HP HPLC System 1100 Series

This was removed from a university lab where it was surplus to requirements.

The lab confirmed the system was working prior to removal.

Included are;

1x Vacuum Degasser

Pr No. G1322A

The unit powers up and is in good cosmetic condition.

1x Quat Pump

Pr No. G1311A

The unit powers up and is in good cosmetic condition.

1x ALS

Pr No. G1313A

The unit powers up and is in good cosmetic condition.

This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab where it was surplus to requirements.

Everything powers up and the system is in good cosmetic condition with some marks from use.

There appears to be an issue with at least one of the injectors. When we attempt to 'home' the robot head it will start to home the various parts, then stall and with an error code

'error homing: Y2 Axis error: Motion error; the axis was unable to perform the specified move. (0100)

We believe the issue is with the #2 injector side-to-side motor. The up-and-down motor appears to run well.

This error makes it impossible to home the system. So it could not be tested any further.

The system comprises of;

1 x Beckman Coulter Biomek NXp Laboratory Automation Workstation

Cat no. A31840

Unit dimensions - W77 L92 H98cm

1 x IBM ThinkCentre PC

MT-M 8113-DA1

Biomek Software Version 3.3 installed.

1 x Lenovo Monitor

Type - 9227-AC1

1 x Lenovo Keyboard

1 x IBM Mouse

2 x Nalgene 2 Gallon Waste/Supply Bottles

Box of Accessories:-

Beckman Coulter AccuFrame

Beckman Coulter Vacuum Valve Unit

Power Adaptor

Various cables

8 x 2ml Tube holders (24 tube slots in each)

94 x 2ml tubes

Vacuum Manifold Base

23mm Spacer Collar PN 719751

36mm Collar

3 x Thermo Scientific 96 well 0.2ml plates.

Terumo TSCD-II Terumo Sterile Tubing Welder Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powered on, we are unable to test it further at our facility.

Model: SC-203AH

S/N: 2007-04016

Total Welds: 00006003

Soft Version: S00015

This New Brunswick Scientific Innova 4330 Refrigerated Shaking Incubator was removed from a university lab where it was surplus to requirements.

The unit powers up and the incubator and shaker have both been tested (digital thermometer not included). It is in full working order.

It is in reasonably good cosmetic condition, with signs of use.

Internal Dimensions: 87 x 56 x 34 cm

Syngene G:Box iChemi XR Gel Imaging System

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order, but the camera has not been tested.

The software is available for free online.

it is in good cosmetic condition with minor marks.

Thermo Scientific Surveyor MSQ Plus Mass Spectrometer System

This item was removed from a university where it was surplus to requirements.

The system is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility.

Additionally, the client has reported that all hardware is functioning correctly.

Included Components:

• APCI Probe
• 2 x Bottles
• 20 x Thermo Corona APCI Needles

Specifications:

• Model: Surveyor MSQ
• Serial No.: MSQ21121

Zeiss Axioskop 2 System Power Supply

This system was removed from a university lab where it was surplus to requirements.

All included units power on and are in good cosmetic condition.

The previous client has stated this system was in full working order prior to removal.

The system includes the following Zeiss objectives, all of which are producing clear images and are in good condition with no scratches:

• Zeiss Plan-NEOFLUAR 20X/0.50 (1004-072)
• Zeiss Epiplan 10X/0.20 HD (44 29 34)
• Zeiss Plan-NEOFLUAR 40X/0.75 (44 03 50)
• Zeiss Epiplan 50X/0.70 HD (44 29 54)

Additional components:

• Jena GmbH ebq 100 Isolated Power Supply (Model: ebq 100 isolated-z/101 26f, S/N: M 47415479)
• 2 x HAL 100 Lamps (1039-685, 44 72 19)
• 1 x HBO 100 Lamp 1007-980
• Imagingsource DFK 41AFO2 Camera
• 2 x Zeiss W-Pl 10x/23 Eyepieces (45 50 43)

Please note, there is no mercury bulb included.

Corbett Research Rotor-Gene RG-3000 with PC & Software

This was removed from a university lab where it was surplus to requirements.

The unit powers up and has been tested with the software. It was programmed to run and worked well in testing.

It is supplied with a Windows 7 PC with RotoGene 6.1 installed.

Rotor holds 36 x 0.2ml

Comes with:-

PC Cable

2 x Spare rotor parts

2 x Operators Manuals

Rotor Gene Back Up Floppy Disk

Rotor Gene Data Floppy Disk

The Rotor Gene Set up Files v4.2

Rotor-Gene Software Version 4.6

Rotor-gene 3000 Operating Software V4.6.94

RotorGene 36/72 Maintenance Pack 1.0/1.1

There are 4 more copied discs of the same

New Brunswick Innova 4400 Floor Standing Shaking Incubator Double Stack

These were removed from a university lab where they were surplus to requirements.

They have been fully tested to incubate and shake by a service engineer. They are in full working order.

Inside dimensions - D57 W93 H44cm

Platform - 46 x 77cm

They come with brackets for stacking, but there are only 3 feet and one of them is broken.

This Olympus BX45TF Ergonomic Microscope was removed from a university lab where it was surplus to requirements.

The item is in good condition and all dials are fully functional. However, it is missing the left eyepiece rubber cup.

Objectives included:

Olympus UPlanFI - 10x/0.30 ∞/-

Olympus UPlanPL N - 100X/1.30 Oil ∞/0.17/FN26.5

Eyepieces included:

2 x Olympus WH12.5x/16mm

Thermo Scientific MSC-Advantage Class 2 Biological Safety Cabinet

This was removed from a laboratory where it was surplus to requirements.

The unit powers up and is in full working order. It is in good cosmetic condition with some minor marks from use. Socket tester not included.

Internal dimensions:

Dx60 Wx120 Hx75cm

Foss 2050 Soxtex Avanti Extrac Unit with Control & Drive Units

This was removed from a university lab where it was surplus to requirements.

The system powers up but has not been tested further. All the units are in good cosmetic condition with marks from use.

Included are;

1 x 2050 Soxtec Avanti Extract Unit Part No. 10007330.

1 x 2050 Soxtec Avanti Control Unit Part No. 10007334.

1 x 2050 Soxtec Avanti Drive Unit Part No. 10007338.

This Biotage Jones Chromatography Flashmaster II System was removed from a university lab where it was surplus to requirements.

The unit powers on and is in very good cosmetic condition. It has not been tested further at our facility.

There is some chipped paint along the top of the unit and scuffs and scratches from general use.