All Products
Items 681 to 700 of 2263
£ 56.25 (ex. VAT)
ElgaStat Micromeg Instant Purified Water Cartridge Type MC:ES Lab
ITEM-11310
This unit was removed from a lab as surplus to requirements.
£ 562.50 (ex. VAT)
Elliott Progress 2GS Pillar Drilling Machine
ITEM-11426
This unit was removed from an engineering workshop as surplus to requirements.
The workshop manager said this unit was working, but we do not have a 3-phase supply at our site to confirm.
£ 60.00 (ex. VAT)
Elmo P10s Digital Visual Presenter Overhead Projector Office
ITEM-09671
This unit was removed from a university IT department as surplus to requirements.
We have been assured it is in full working order.
We have several units available so in the unlikely event you receive one with a problem we should be able to replace.
£ 3,375.00 (ex. VAT)
Emitech K450X Carbon Coater Thin Film Coating Lab
ITEM-09199
This unit was removed from a lab as surplus to requirements.
The lab manager informed us it was working when they last used it, but hasn't been used in a while.
We have not fully tested the unit, but initial use of the display panel appears promising.
We do not have the capability to fully test, but if you encounter any problems we offer a free 90-day return.
£ 3,375.00 (ex. VAT)
Emitech K550x Sputter Coater Thin Film Coating Lab
ITEM-09198
This unit was removed from a lab as surplus to requirements.
The lab manager informed us it was working when they last used it, but hasn't been used in a while.
We have not fully tested the unit, but initial use of the display panel appears promising.
We do not have the capability to fully test, but if you encounter any problems we offer a free 90-day return.
£ 112.50 (ex. VAT)
Enbeeco Laboratory Binocular Microscope With W10X Lens
ITEM-08617
This unit was removed from a lab during a clearout. We were assured by the lab that it was in working order.
£ 937.50 (ex. VAT)
Enraf Nonius X-Ray Generator Defelt Diffractis 582 System Physics
ITEM-09658
This system was removed from a university physics department as it was no longer in use.
The system was working when last used, but that was over 5 years ago.
During the removal, the university has some minor issues as described below:
"We had a small mishap in transit with two knobs on the front of the generator; the casing appears to be a bit brittle and some bits have partially snapped off (not the knobs themselves). I think with judicious use of superglue the casings could be re-affixed to look as new. "
<u>The oscilloscopes and other power supply / modules shown ontop of the unit in the first picture are not included. These were retained by the lab.</u>
£ 187.50 (ex. VAT)
Envair Class I Microbiological Safety Cabinet Lab MSC
ITEM-07364
This unit is in full working order and was last validated in June 2018. It was professionally disconnected in January 2019 as it was no longer required by the laboratory.
There is no top hood to this cabinet: The plastic that sits ontop and funnels the fumes into a single pipe for ducting. That is not included (its covered by the red bag in the photo). Therefore you would need to order one or create something suitable for this unit.
£ 3,375.00 (ex. VAT)
Envair Pharm-Assist 2G2D Laboratory Isolator Microbiological Safety Cabinet
ITEM-09115
This unit was removed from a lab as surplus to requirements. The first photos shown the unit in the original facility. The systems transfer hatches had to be removed to get the unit out of the building.
Unit comes complete with these transfer hatches and has been biannually serviced up until Aug 2018.
The HEPA filter is included with this unit. Whilst the filter is 'used' the isolator has received several VHP fumigations since its last use, and a decontamination certificate is included to confirm it has received fumigation since last use.
£ 300.00 (ex. VAT)
EP2P Electric Double Decker Pizza Oven Restaurant Commercial Catering
ITEM-10512
This unit was removed from a catering facility as surplus to requirements.
We have tested the unit and it heats up properly and appears to be in full working order.
The unit would benefit from a good clean-out though.
£ 300.00 (ex. VAT)
EPI RF Plasma Source Tuning Unit MBE Products UHV Vacuum
ITEM-10000
This unit was removed from a chemistry lab as surplus to requirements.
We were assured the unit is in full working order - but have only tested it to power-on ourselves.
£ 753.75 (ex. VAT)
Eppendorf 5331 MasterCycler Gradient Thermal Cycler
ITEM-11346
This unit was removed from a lab as surplus to requirements.
The lab manager assured us it was in working order prior to removal. At our site we have conducted some basic tests on the unit and it appears to be in working order.
£ 750.00 (ex. VAT)
Eppendorf 5331 MasterCycler Gradient Thermal Cycler PCR
ITEM-11345
This unit was removed from a lab as surplus to requirements.
The lab manager assured us it was in working order prior to removal. At our site we have conducted some basic tests on the unit and it appears to be in working order.
£ 150.00 (ex. VAT)
Eppendorf 5331 MasterCycler Gradient Thermal Cycler PCR - Spares Repairs
ITEM-11707
This unit was removed from a lab during a clearout.
The unit powers up, and the block heats up to 99deg. But the unit shows a Tsensor error 0. This is the left thermoblock sensor error. So the unit won't do anything else.
Unit is sold as spares / repairs.
£ 750.00 (ex. VAT)
Eppendorf 5331 MasterCycler Gradient Thermal Cycler PCR Lab
ITEM-09190
This unit was removed from a lab as surplus to requirements. The lab tech believed the unit was in working order when last used, but hadn't been used in a few years.
We have powered it on, and it appears to run programs correctly. We have not put a thermometer on the unit to validate its temperature but otherwise we expect the unit should work properly.
£ 375.00 (ex. VAT)
Eppendorf 5331 MasterCycler PCR Gradient Thermal Cycler Lab Spares Repairs
ITEM-09161
This unit was removed from a lab during a clearout.
We powered on the unit, but unfortunately the digital display is very poorly illuminated and so its impossible to read the output of the unit. We have not been able to run any further tests.
Unit is sold as spares / repairs.
£ 56.25 (ex. VAT)
Eppendorf 5413 Bench-Top Laboratory Centrifuge - Spares Repairs
ITEM-10713
This unit was removed from a lab during a clearout.
The unit powers on but the lid won't open.
We do not know if there is a rotor.
Unit sold as spares / repairs.
£ 56.25 (ex. VAT)
Eppendorf 5415 Centrifuge Laboratory Equipment w/ 18 place rotor
ITEM-05977
Eppendorf 5415 Centrifuge Laboratory Equipment w/ 18 place rotor
This item originated in a top UK University and has come to us as part of a Lab Clear Out.
The centrifuge operates with adjustable time and speed however the green operational light does not illuminate.
240v
250W
50Hz
Max Speed 14000 min-1
£ 225.00 (ex. VAT)
Eppendorf 5415 Lab Centrifuge Microcentrifuge Spares Repair
ITEM-09425
This unit was removed from a lab store-room during a clearout.
The unit powers up but reads an error message. We were unable to open the lid to check if a rotor is included.
The unit is sold as spares / repairs.
£ 168.75 (ex. VAT)
Eppendorf 5415C Lab Benchtop Centrifuge Laboratory
ITEM-10167
This unit was removed from a lab store-room during a clearout.
The unit appears to be in working order.
Items 681 to 700 of 2263