All Products

£ 2,100.00 (ex. VAT) 1 in stock

GE Lifescience BioProcess Glass Chromatography Column BPG 300/500

ITEM-35824

GE Lifescience BioProcess Glass Chromatography Column BPG 300/500

This was removed from a university lab where it was surplus to requirements.

The unit is in reasonably good cosmetic condition with minor marks.

Model -300/500

SN - 2025651

Code - 18110321

Manufactured - 2015

Item specifications:

Operating temp. TS - 4-40 ºc

Max column volume - 34 L

Max filling mass - 51KG

Tare mass - 68Kg

Group /cat. - 1/NA

Design Pressure PS - 4 Bar g

£ 2,100.00 (ex. VAT) 1 in stock

Applied Biosystems 7300 Real Time PCR System with PC & Software Lab

ITEM-30000

This Applied Biosystems 7300 Real Time PCR System was removed from a university lab where it was surplus to requirements.

The system is comprised of;

1 x Applied Biosystems 7300 Real-Time PCR Unit.

1 x Dell Optiplex 380 with Monitor, keyboard, mouse, USB cable & monitor cable.

Running Applied Biosystems Sequence Detection Software (SDS)

Version 1.2.3.

The Dell has a Fresh install of Windows XP.

The 7300 has had a function test run:

USB - Pass

CCD - Pass (version 2.19)

Filter Wheel - Pass (FW version G2.10)

Shutter - Pass (FW version G2.10)

Lamp - Pass (FW version G2.10)

Thermal Cycler - Pass (G2.10 Firmware is up to date)

The lamp status is Good.

It has 1444 Usage hours.

It was last replaced 08/01/2008.

The unit will require the ROI calibration.

NEW ITEM

£ 2,095.00 (ex. VAT) 1 in stock

22 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights Lab

ITEM-35858

22 x Ohaus Traveler TA301 Electronic Balances/Scales & Calibration Weights

These were removed from a university lab where they were surplus to requirements.

The units are brand new and unused.

Includes:

22 x Ohaus 200g weights

22 x power supplies

22 x manuals

£ 2,095.00 (ex. VAT) 1 in stock

41 pcs Rotary Evaporator Condenser Glassware Lab

ITEM-24212

41 x Pcs Rotary Evaporator Condenser Glassware

These were removed from a university lab where they were surplus to requirements.

All units are used but are in good, clean cosmetic condition.

Included are;

15 x 30cm x 7cm two inlets, two outlets

4 x 33cm x 7cm two inlets, two outlets

12 x 28cm x 3cm two inlets, two outlets

5 x 18cm x 6cm Linton 10ml separator traps six nozzles, three with taps, two without

4 x 15cm x 3.5cm through flasks with three nozzles

1 x 20cm x 6.5cm Quickfit MF29/3/250 wash bottle 250ml

£ 2,070.00 (ex. VAT) 1 in stock

BIO-RAD iCycler Thermal Cycler with iQ5 Multicolor PCR Detection System Lab

ITEM-35025

BIO-RAD iCycler Thermal Cycler with iQ5 PCR Detection System Lab

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

£ 2,065.00 (ex. VAT) 1 in stock

Pfeiffer Turbo-V 301 Navigator Model#: 9698918S003 Turbomolecular Pump Lab

ITEM-36199

Pfeiffer Turbo-V 301 Navigator Model#: 9698918S003 Turbomolecular Pump Lab

This was removed from a university lab where it was surplus to requirements.

The unit has not been tested but is in good cosmetic condition with minor marks.

£ 2,050.00 (ex. VAT) 1 in stock

Thermo Scientific Revco Elite Plus Ultra Low Temperature Freezer ULT2586-6-W48

ITEM-38756

Thermo Scientific Revco Elite Plus Ultra Low Temperature Freezer ULT2586-6-V48

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good working order.

It is in good cosmetic condition with minor marks.

Capacity 692 Litres

Internal dimensions W 61cm x L 87cm x H 128cm

£ 2,050.00 (ex. VAT) No longer available

Peak Scientific Model Precision Hydrogen Trace 500cc Hydrogen Generator Lab

ITEM-35390

This Peak Scientific Trace 500 Hydrogen Generator was removed from a university lab where it was surplus to requirements

The unit powers up and passed self tests but has not been tested further.

It is in good cosmetic condition with minor marks.

RECERTIFIED ITEM

£ 2,035.00 (ex. VAT) 1 in stock

Integra Cellspin Cell Control Magnetic Stirrer Four-Platform System Lab

ITEM-27676

Integra Cellspin Cell Control Stirrer Four-Platform System

This was removed from a lab where it was surplus to requirements.

The unit has been tested by a service engineer and is in full recertified working order.

This listing consists of:

1 x Integra Cellspin Controller.

4 x Integra Cellspin Platforms.

3 x 186050 2m Control Cables.

1 x 186238 Controller PSU.

This system will allow you to run either 1 or 2 x Platforms at once. Only one controller cable is needed for this setup.

The system includes 2 x spare platforms and 2 x spare control cables. Another controller could be purchased from the distributor to allow for 2 complete 2 platform systems. We can quote for an extra brand-new controller if required.

The platforms have all had brand-new belts fitted and have been rpm-tested through the range.

Note that these platforms require spinner flasks to operate correctly. These can be purchased separately from the distributor. We can also quote for these flasks if required.

£ 2,030.00 (ex. VAT) 1 in stock

Limpsfield LCNP15 Natural Gas 1305 Kw Burner w/ Autoflame Control System

ITEM-37800

Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The item details are as follows:

Model LCNP15

Serial No. 01159

Manufactured 30.05.14

Output 1303Kw/hr

With Autoflame Combustion Management System

Part Nos. 2 x MM10005, Serial Nos. 12303, 12290

Siemens Ignition Transformer Type ZE 23/8.5

Dungs LGW 50 A4 pressure switch

WEG W22 7.5hp 415 volt fan motor

Caldaia A Condensazione high limit cut-off control

2.0" gas inlet pipe

No testing carried out.

£ 2,025.00 (ex. VAT) No longer available

Peak Scientific - Precision Hydrogen Trace 500cc Hydrogen Generator Lab

ITEM-35391

Peak Scientific Trace 500 Hydrogen Generator

This item was removed from a university laboratory where it was surplus to requirements.

It powers on successfully, with LED lights and screen functioning. The unit performed a self-test upon startup, but no further testing has been conducted.

The generator is in good, clean cosmetic condition.

£ 2,020.00 (ex. VAT) 1 in stock

Climet Model CI-95+ Microbial Air - Sampler Lab

ITEM-38118

Climet Model CI-95+ Microbial Air Sampler Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

This item does not include a battery pack and charger.

£ 2,020.00 (ex. VAT) 1 in stock

Limpsfield LCNP15 Gas Burner 1305 Kw with Autoflame Control System

ITEM-37799

Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The item details are as follows:

Model LCNP15

Serial No. 01160

Manufactured 30.05.14

Output 1303Kw/hr

With Autoflame Combustion Management System

Part Nos. 2 x MM10005, Serial Nos. 12294, 12331

Siemens Ignition Transformer Type ZE 23/8.5

Dungs LGW 50 A4 pressure switch

WEG W22 7.5hp 415 volt fan motor

Caldaia A Condensazione high limit cut-off control

2.0" gas inlet pipe

£ 2,020.00 (ex. VAT) 1 in stock

Solartron SI 1280 Electrochemical Measurement Unit Model - 1280A Lab

ITEM-19267

This Solartron SI 1280 Electrochemical Measurement Unit Model - 1280A was removed from a university lab where it was surplus to requirements.

The unit powers up but has not been tested further.

It is in reasonably good cosmetic condition but has some marks from use.

£ 2,010.00 (ex. VAT) 1 in stock

Climet Type CI-95+ Microbial Air Sampler Lab

ITEM-38117

Climet Model CI-95+ Microbial Air Sampler Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

This item does not include a battery pack and charger.

£ 2,010.00 (ex. VAT) 1 in stock

Limpsfield Model LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System

ITEM-37798

Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The item details are as follows:

Model LCNP15

Serial No. 01162

Manufactured 30.05.14

Output 1303Kw/hr

With Autoflame Combustion Management System

Part Nos. 2 x MM10005, Serial Nos. 12272, 12302

Siemens Ignition Transformer Type ZE 23/8.5

Dungs LGW 50 A4 pressure switch

WEG W22 7.5hp 415 volt fan motor

2.0" gas inlet pipe

£ 2,010.00 (ex. VAT) 1 in stock

Limpsfield LPN3/2051 Gas Burner 2051 KW/hr (7.0MBtu/hr)

ITEM-37791

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr)

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and in good working order.

The item details are as follows:

Model LPN3/2051

Serial No.01336

Manufactured 18.09.15

Output 2051 KW/hr 7.0 MBtu/hr

Dungs Control System

With Autoflame Combustion Management System

Part Nos. MM10005, MM10004 Serial Nos. 20066, 52511

WEG W22 7.5hp 415 volt fan motor

2.5" gas inlet pipe

£ 2,010.00 (ex. VAT) 1 in stock

Applied Biosciences 7900HT Fast Real-Time PCR Complete System Lab

ITEM-41491

Applied Biosciences 7900 HT Fast Real-Time PCR Complete System Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Includes:

16A 1Phase cable

£ 2,000.00 (ex. VAT) No longer available

QIAGEN QIAcube RNA/DNA Extraction Instrument

ITEM-42123

QIAGEN QIAcube RNA/DNA Extraction Instrument

This item was removed from a university laboratory where it was surplus to requirements.

The instrument powers on and is in good working condition, with some visible wear. The front window appears to have been replaced, this does not affect its functionality.

Tested Functions:

Centrifuge: Operates up to 12,000g (measured in g-force, not RPM); includes 12 swinging buckets, all present.
Shaker: Tested to maximum of 2000 RPM.

No further testing was conducted.

Specifications:

Model: QIAcube
Serial No.: 5529
Number of Protocols: 20

£ 2,000.00 (ex. VAT) No longer available

Thermo Neslab M75 Merlin Series Recirculating Cooler Lab

ITEM-38073

Thermo Neslab M75 Merlin Series Recirculating Cooler Lab

This item was removed from a university where it was surplus to requirement.

The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.

It is in very good cosmetic condition.

£ POA 1 in stock

Sorvall Discovery M150 SE Centrifuge w/ S140-AT Fixed Angle Titanium Rotor Lab

ITEM-44516

This item is new in stock. Please enquire for further details.

£ 2,000.00 (ex. VAT) 1 in stock

Zeiss Stemi SV 11 Stereo Microscope Lab

ITEM-44413

Zeiss Stemi SV 11 Stereo Microscope

This item was removed from a university laboratory where it was surplus to requirements.

The microscope is in fair cosmetic condition.

The PSU has been fitted with a UK plug, replacing the original American one, and it powers the shutter effectively; operation can be heard when using the switch. The HBO 100 lamp has not been tested as the required PSU is not included.

Includes:

HBO 100 mercury lamp (note: bulb usage unknown, no PSU included for the lamp)
Foot pedal and light source
Kramer Scientific HR 10x/0.45 KSC 190-975 Objective
Light pipe (note: no light source included)

Specifications:

Model: Stemi SV 11
Serial No.: 000238

SPARES/REPAIR ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Olympus BX51WIF Microscope w/ XLUM Plan FI 20x/0.95 W Objective Lab Faulty

ITEM-39791

Olympus BX51WI Microscope w/ XLUM Plan FI 20x/0.95 W Objective

This was removed from a university lab where it was surplus to requirements.

The item is in reasonably good cosmetic condition.

It is fitted with a high-quality 20x water immersion lens, 1 filter cube, and a broken filter carousel light shield (easily replaceable). The fine focus belt is broken and requires replacement and there is no fluorescence light source (liquid light guide type) or stage is included.

Due to the faults stated above, this microscope system is listed as Spares/Repair.

It is made up of the following modules;

Olympus WHN10x/22 Eyepiece x 2

Olympus XLUMPlanFI 20x/0.95 W Objective

Olympus U-LH100IR Lamp

Olympus WI-OBCD NA 0.8 Condenser

Olympus TH4-200 Power Supply

£ 2,000.00 (ex. VAT) 1 in stock

BD Accuri C6 Flow Cytometer CSampler Lab

ITEM-36216

BD Accuri C6 FlowCytometer CSampler

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further at our facility.

It is in excellent cosmetic condition with minor marks.

Included additionally are;

BD Accuri C6 Software Disk

BD CSampler Software Disk

Dell P1914S Drivers and Documentation Disk

BD Accuri Allen key assembly tool

BD Accuri C6 Flow Instrument Manualn

BD Non slip mat

24-tube rack for standard 12 x 75-mm tubes

BD Accuri C6 FlowCytometer CSampler

Model: C6 BD CSampler

Serial#: 5202

Release Date: Feb 2014

£ 2,000.00 (ex. VAT) 1 in stock

Thermo Scientific Haake SC100 With A28 Water Bath Lab

ITEM-34892

Thermo Scientific Haake A28 Chiller Lab

This item was removed from a university laboratory where it was surplus to requirements.

It powers on and is in good cosmetic condition.

The unit appears to be fully operational, although there is one line through the LCD display, which does not affect the functionality of the unit.

£ 2,000.00 (ex. VAT) 1 in stock

BD Biosciences ACCURI C6 Cell Sorter System with Software Lab

ITEM-21214

This ACCURI C6 Cell Sorter System was removed from a university lab where it was surplus to requirements.

The unit had previously been in use up until the day it was removed. It was replaced with a new system. It is fully working.

The unit powered on with no problems at our facility. It is in excellent cosmetic condition.

It comes supplied with the PSU, USB lead, software CD, manuals and data books.

£ 2,000.00 (ex. VAT) 1 in stock

SI Analytics TitroLine 7500 KF Trace Lab

ITEM-44661

TitroLine 7500 KF Trace SI Analytics Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

£ 2,000.00 (ex. VAT) 1 in stock

Leica Cryostat CM1900 CM1900-1-1 Lab

ITEM-37325

Leica Cryostat CM1900-1-1 Lab

This item was removed from a university lab where it was surplus to requirement.

The unit powers up and is in good working order.

It is in good cosmetic condition interally and externally.

£ 2,000.00 (ex. VAT) 1 in stock

Betol 2520J Single-Screw Extruder

ITEM-45427

Betol 2520J Extruder

This item was removed from a university lab where they were surplus to requirements.

It is in good used cosmetic condition and powers on.

The previous client has stated it was last used around 6 years ago and reportedly worked fine at the time.

Please note: this item does not contain a Drill-Bit.

£ 2,000.00 (ex. VAT) 1 in stock

Varian 450-GC GC Gas Chromatograph with CP-8400 Autosampler Lab

ITEM-25049

Varian 450-GC GC Gas Chromatograph

This was removed from a university lab where it was surplus to requirements.

The unit powers up and is in good cosmetic condition with minor marks.

Filters:

1x Moisture Filter CP1791

1x Oxygen Filter CP17970

SPARES/REPAIR ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Zeiss ConfoCor 2, LSM510, APD Module Meta System Parts Faulty Lab

ITEM-45164

Zeiss ConfoCor 2/LSM510 Meta System Parts Faulty Lab

These items were removed from a university lab where they were surplus to requirements.

Due to the casing being removed from the ConfoCor 2/LSM510 we are unsure of its operational capabilities and therefore, are unable to conduct any further testing.

All other remaining parts are also untested, and therefore, are sold as Spares/Repair.

This system features a Class III Laser.

Included is the following:

1 x Zeiss ConfoCor 2

1228-790

1 x LSM510 Meta

1228-919

Channel 2

1133-991

Channel 3

1140-340

1 x APD Module

1056-471

1 x Andor/Micro Point 2205

Laser Illumination and Ablation System.

1 x Remote Control Switch

2 x System Interface Plates for an AxioVert 200M.

These allow the ConfoCor & LSM to interface with an AxioVert 200M Microscope.

Various connection cables.

£ 2,000.00 (ex. VAT) 1 in stock

CS Bio Co. Peptide Synthesizer Model CS136 Full Glassware Lab

ITEM-38319

CS Bio Co. Peptide Synthesizer Model CS136 Full Glassware

This was removed from a university lab where it was surplus to requirements.

The unit is in very good cosmetic condition internally and externally.

It powers on, but we are unable to conduct further testing at our facility.

Item contains the following:

Left hand side 60 x 65 x 46cm lower area stores x 10 VWR glass bottles with tops and pipework.

Sizes of bottles are 1 x 5 litre, 3 x 2 litre, 4 x 1 litre, 1 x 0.5 litre.

The upper shelf suspends 12 CS-marked glass bottles of length 14cm, diameter 4cm all with tops and pipework.

Right hand side 35 x 30 x 75cm (l x w x h)

5 x pieces of specialized glassware containers marked CS with glass pipework for sensors to clamp onto.

Additionally, includes the following:

2 x plastic waste containers approx 15 litres with caps and pipework

3 x 1 meter lengths of small bore plastic pipe with threaded union ends

2 x power leads

5 x spare glass bottles between 11-20cm in length and 3.5-55cm in diameter

£ 2,000.00 (ex. VAT) 1 in stock

Hettich Universal 32 R Centrifuge with 4000rpm Rotor Lab

ITEM-45197

Hettich Universal 32 R Centrifuge

This item was removed from a university laboratory where it was surplus to requirements.

The centrifuge powers on and is in fair cosmetic condition. It has been tested for Temperature and RPM functionality and is in good working order.

Testing Summary:

RPM: Successfully reached 2000 RPM and 4000 RPM.

Specifications:

Model: Universal 32 R
Serial No.: 0003465-01-10

£ 2,000.00 (ex. VAT) 1 in stock

KNF FLODOS STEPDOS 03 Diaphragm Metering Pump System Lab

ITEM-41356

KNF FLODOS STEPDOS 03 Diaphragm Metering Pump System

This system was removed from a university where it was surplus to requirement.

All pumps are in good cosmetic condition and powered up, we are unable to test the system further at our facility.

The system comprises:

-Terminal Eliminator Plus Black box

-RM Accelerator PC Tower

-DAC Calibration Files Floppy Disk

-Various Cables

SPARES/REPAIR ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Priorclave PS/QCS/EV150 Top Loading Autoclave Lab Spares/Repairs

ITEM-36503

Priorclave PS/QCS/EV150 Top Loading Autoclave

This was removed from a university lab where it was surplus to requirements.

The unit powers up but has a main board fault.

It is sold for spares/repairs.

SPARES/REPAIR ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Waters Micromass EMD 1000 Single Quadrupole Benchtop Mass Spectrometer Lab Fault

ITEM-44527

Waters Micromass EMD 1000 Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition but does not power on, therefore it is listed as Spares/Repair.

SPARES/REPAIR ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Varian Cary 500 UV-VIS-NIR Spectrophotometer w/ Software (Spares/Repair) Lab

ITEM-42119

Template input incorrectly - Listed as Used and not S/R

Varian Cary 500 Scan UV-VIS-NIR Spectrophotometer with PC and Monitor

This system was removed from a university laboratory where it was surplus to requirements.

The spectrophotometer powers on, communicates with the PC, and is in good condition with minimal wear. However, multiple error messages are displayed during operation. Therefore, it is listed as Spares/Repair.

The previous client has also confirmed that the system was not operational when last used.

Error Messages Displayed:

SEQFatal Chopper Failure – Reported during calibration
CCTVis Lamp Failure – Vis lamp has failed; restarting the unit did not resolve the issue, suggesting a replacement may be necessary
CHGVis Source Failure – Reported by the instrument software
NMPDatum Not Found – Re-powering suggested, though the issue persists

Software Included (WinUV Folder):

Align
Cary Help
Scan
Simple Reads

Additional Components:

Dan PC
Model: Dantum
Serial No.: 428199-1
Condition: Powers on, good condition with some wear.

Monitor (Lenovo ThinkVision)
Serial No.: VN722039
Condition: Powers on, great condition with no wear.

Spectrophotometer Specifications:

Model: Cary 500 Scan
Serial No.: EL97123060

SPARES/REPAIR ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Edwards E306A Thermal Evaporator Coating System Lab Spares/Repairs

ITEM-41634

Edwards E306A Thermal Evaporator Coating System Lab

This item was removed from a university where it was surplus to requirement.

It is in reasonable cosmetic condition but does not power on, therefore it is listed as Spares/Repairs. It also has some loose panels.

This item is missing its coating chamber.

SPARES/REPAIR ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Cambridge Stereoscan 200 SEM Scanning Electron Microscope Lab

ITEM-40007

Cambridge Stereoscan 200 SEM Scanning Electron Microscope

This system was removed from a university where it was surplus to requirement.

It is in reasonably good cosmetic condition.

This item has not been powered on or tested further, therefore it is listed as Spares/Repairs.

SPARES/REPAIR ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Baker Ruskinn Invivo2 400 Incubated Glovebox and Iconic Gas Control Lab Faulty

ITEM-37958

Baker Ruskinn Invivo2 400 Incubated Workstation Glovebox and Iconic Gas Control

This system was removed from a university lab where it was surplus to requirements.

The unit powers up and has been temperature tested (thermometer not included).

It is in good cosmetic condition internally/externally, with the display screen and internal light/socket in working order.

The previous client has stated that it has a faulty O2 sensor, this was confirmed on-site during testing.

Therefore, it is listed as Spares/Repair.

Also includes;

2 x Power leads

3 x Gas feed hoses

1 x Data cable

SPARES/REPAIR ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Perkin Elmer GC Gas Chromatograph Clarus 480 Lab Spares/Repairs

ITEM-35471

This Perkin Elmer GC Gas Chromatograph Clarus 480 was removed from a university lab where it was surplus to requirements.

It is in reasonably good cosmetic condition and powers up.

The original ECD detector has been removed, leaving mains cables exposed, therefore, this item is listed as Spares/Repair.

Part number- N664948E

Serial number- 480S13030901

SPARES/REPAIR ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Miltenyi Biotec autoMACS Pro Cell Separator Spares/Repairs Lab

ITEM-29911

This Miltenyi Biotec autoMACS Pro Cell Separator was removed from a university lab where it was surplus to requirements.

The item turns on and is in good condition with only minor signs of use.

When the device started up, it ran into an error with code 7033. The error message warned that the clock timer was not set, and we needed to select the "set_time" option from the user settings. We tried to dismiss the warning by pressing the OK button, but the touchscreen did not respond. Unfortunately, this meant we were unable to perform any further testing.

Due to this item is sold as Spares/Repairs.

SPARES/REPAIR ITEM

£ 2,000.00 (ex. VAT) 1 in stock

Job Lot of Enraf Nonius Delft X-Ray System Units

ITEM-21109

The unit was removed from a university lab. It has not been tested at our facility.

This job lot of items comes from a university lab, The items were no longer required.

None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well.

None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks.

They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

The units have not been tested at all.

Included are;

Enraf Nonius Goniometer Control Unit

Type 0590.821

Serial No. 042

Enraf Nonius main processing unit

Type 1546.801

Serial No. 19-19

Jobin Yvon Horiba PC without HDD

Bruker Nonius X-Ray Control

Type 1590.830

Serial 24-04

Enraf Nonius Delft x-ray station with Thomson Tubes X-Ray Head

Enraf Nonius Pocket Terminal

Serial No. 69786R

2 x Huber mechanical adjusting blocks

Part Nos. D83253 D8219

4 x Software disks Cad4- PC Software V1.5c 3.5

Connecting cables and data leads

£ 2,000.00 (ex. VAT) 1 in stock

Agilent 6850 GC Gas Chromatography System Lab

ITEM-36572

Agilent 6850 GC System

This item was removed from a university laboratory where it was surplus to requirements.

The gas chromatograph powers on and is in good cosmetic condition, with all control buttons fully functional and performing as intended.

No further testing has been conducted.

Specifications.

Model No.: 6850
Serial No.: US200002800

£ 2,000.00 (ex. VAT) 1 in stock

BD Biosciences ACCURI C6 Cell Sorter System Lab

ITEM-25259

This BD Biosciences ACCURI C6 Cell Sorter System was removed from a university lab where it was surplus to requirements.

The unit powers up but as there were no software discs or testing solutions with it we had our service engineer observe the system initialising without the cover on. They reported that it initialised as it should.

It is in very good cosmetic condition with only minor marks from use.

£ 2,000.00 (ex. VAT) 1 in stock

Accuri C6 Flow Cytometer Lab

ITEM-41640

Accuri C6 Flow Cytometer Lab

This item was removed from a university where it was surplus to requirement.

It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

This item has been tested with an in-house 12v power supply. (not included).

£ 2,000.00 (ex. VAT) 1 in stock

BD Accuri C6 Flow Cytometer Lab

ITEM-44435

BD Accuri C6 Flow Cytometer

This system was removed from a university lab where it was surplus to requirements.

The unit is in good cosmetic condition and powers on with all lights and buttons functioning.

No further testing has been conducted due to the absence of software.

The power supply is included.

Also included:

2x Large Waste Bottle
2x Small Waste Bottle

£ 2,000.00 (ex. VAT) 1 in stock

BD Accuri C6 Flow Cytometer CSample Lab

ITEM-44587

BD Accuri C6 FlowCytometer CSampler

This was removed from a university lab where it was surplus to requirements.

The unit powers up but we were unable to test it further at our facility.

It is in excellent cosmetic condition with minor marks.

The power supply is included.

Included additionally are;

2 x Large plastic bottles

2 x Small plastic bottles

1 x BD grip mat

1 x BD Accuri C6 Software User guide

1 x BD Accuri Safety and limitations

1 x BD Accuri Instrument Manual

£ 2,000.00 (ex. VAT) 1 in stock

Forma Scientific 958 Ultra Low Temperature Chest Freezer ULT Lab

ITEM-41769

Forma Scientific 958 Ultra Low Temperature Chest Freezer ULT

This item was removed from a university where it was surplus to requirement.

The unit powers up and is in good working order (thermometer not included).

It is in reasonably good cosmetic condition internally and externally.

£ 2,000.00 (ex. VAT) 1 in stock

Olympus Model CLV-S20 Endoscopy System w/ Sony PVM-205MD Lab

ITEM-42050

Olympus Endoscopy System

This system was removed from a university lab where it was surplus to requirements.

The system powers on and is in good condition, with some signs of wear. The camera works as intended, though the system is missing its camera probe and all lighting cables for the Olympus CLV-S20 model. No further testing was carried out. (Please note that the metal trolley and MacBook used for testing are not included.)

The system comprises the following:

Sony PVM-205MD
Model: PVM-205MD
Serial No.: 2002648
Olympus CLV-S20
Model: CLV-S20
Serial No.: 7622380
Olympus OVT-SX
Model: OVT-SX
Serial No.: 1601417
Olympus OVT-SC
Model: OVT-SC
Serial No.: 7205132
Olympus OVT-S3
Model: OVT-S3
Serial No.: N/A (Missing Info Plate)
Olympus Digital 3CCD
Model: OVT-SX
Serial No.: 1601417

Macbook Not Included