Items 361 to 380 of 3041

Image of item

£ 2,195.00 (ex. VAT) 1 in stock

Thermo Scientific Revco Elite Plus Ultra Low Temperature Freezer ULT2586-6-V48

ITEM-38756

Thermo Scientific Revco Elite Plus Ultra Low Temperature Freezer ULT2586-6-V48


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good working order.


It is in good cosmetic condition with minor marks.


Capacity 692 Litres

Internal dimensions W 61cm x L 87cm x H 128cm


Image of item

£ 2,195.00 (ex. VAT) 1 in stock

Beckman Coulter Biomek 4000 Automated Laboratory Workstation Lab

ITEM-36679

Beckman Coulter Biomek 4000 Automated Laboratory Workstation


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good working order. It was serviced in 2022 and has not been used since.


It is in excellent cosmetic condition with marks from use.


PC & Accessories:-

Lenovo ThinkCentre PC

ViewSonic 21.5" Monitor

Dell Keyboard & Mouse


PC has Biomek Software Version 4.1


Comes with a box of spare parts including cables, blocks and adaptor plates.

Image of item

£ 2,185.00 (ex. VAT) 1 in stock

Carbolite Laboratory Furnace Model - VCF 12/23 Lab

ITEM-27498

This Carbolite Laboratory Furnace Model - VCF 12/23 was removed from a university lab where it was surplus to requirements.


The unit was fitted with a 32 amp plug (not included). It is in full working order. It has been tested and fitted with a replacement temperature controller by an engineer.


It is in reasonable cosmetic condition but has some dents.



Image of item

£ 2,165.00 (ex. VAT) 1 in stock

Thermo Scientific VersaCool Refrigerated Circulating Water Bath Lab

ITEM-24423

This Thermo Scientific VersaCool Refrigerated Circulating Water Bath was removed from a university lab where it was surplus to requirements.


The unit powers up and is in very good cosmetic condition. It was tested with a digital thermometer (not included).


Heating:-

Tested with water, the temperature was set to 37˚c, the temperature quickly went up to 38˚c while the thermometer read 37˚c. It was then tested up to the maximum temperature (for water) of 90˚c which it reached after around 10 minutes, thermometer also read 90˚c. It can go higher but we didn't want it to boil. It is rated for 150˚C.


Cooling:-

Tested with Antifreeze, the temperature was set to -20˚c, it dropped quite quickly to -8˚c but seemed to stop cooling from there, only dropping a further 0.3˚c over the next few hours. The thermometer read -9.6˚c. This is likely due to the concentration of antifreeze used.


Image of item

£ 2,160.00 (ex. VAT) 1 in stock

Thermo Scientific NanoDrop Lite Spectrometer / NanoDrop Printer

ITEM-31650

Thermo Scientific NanoDrop Lite Spectrometer / NanoDrop Printer


This was removed from a university lab where it was surplus to requirements.


The unit powers up and is in good cosmetic condition with minor marks from use.



Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 2,160.00 (ex. VAT) 1 in stock

Integra Cellspin Cell Control Magnetic Stirrer Four-Platform System Lab

ITEM-27676

Integra Cellspin Cell Control Stirrer Four-Platform System


This was removed from a lab where it was surplus to requirements.


The unit has been tested by a service engineer and is in full recertified working order.


This listing consists of:


1 x Integra Cellspin Controller.

4 x Integra Cellspin Platforms.

3 x 186050 2m Control Cables.

1 x 186238 Controller PSU.


This system will allow you to run either 1 or 2 x Platforms at once. Only one controller cable is needed for this setup.


The system includes 2 x spare platforms and 2 x spare control cables. Another controller could be purchased from the distributor to allow for 2 complete 2 platform systems. We can quote for an extra brand-new controller if required.


The platforms have all had brand-new belts fitted and have been rpm-tested through the range.


Note that these platforms require spinner flasks to operate correctly. These can be purchased separately from the distributor. We can also quote for these flasks if required.


Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 2,155.00 (ex. VAT) 1 in stock

Leica DMRBE Fluorescence Trinocular Microscope & 4 x Objectives PL FLUOTAR Lab

ITEM-20148

This Leica DMRBE Fluorescence Trinocular Microscope was removed from a university lab where it was surplus to requirements. The lab assured us this unit was in full working order when last used.


The unit has been inspected and certified by a microscope engineer. The report is available on request. It is in good working order. No major defects were identified.


It is in good cosmetic condition with some light marks from use.


TYP: TCS NT


Included with it are;


2x LEICA eye pieces

L PLAN 10X /25 M


and 4 x Objectives.


1x LEICA    PL FLUOTAR 5X/ 0.12


1x LEICA  PL FLUOTAR 10X/ 0.30 PH 1


1x LEICA  PL FLUOTAR 20X/ 0.50 PH 2


1x LEICA   PL FLUOTAR 40X /1.00 0IL PH 3

Image of item

£ 2,155.00 (ex. VAT) 1 in stock

CIF Technodrill 2 CNC Drilling & Milling Prototype Machine Lab

ITEM-23982

This CIF Technodrill 2 CNC Drilling & Milling Prototype Machine was removed from a university engineering department where it was surplus to requirements.


The item is in very good cosmetic condition. The lab said the machine is old technology but they believe it has never been used, having been purchased for an abandoned project some time ago. 


It powers up and is in working order.


It can be used for small-scale milling work, in particular, milling printed circuit board designs onto copper-clad FR4 board. It comes complete with a wheeled enclosure made from Aluminium T-slot/acrylic.


The item comes with Galaad 3 user manual, and Galaad 3 CAD-CAM-CNC software for windows as well as some unopened accessories.


Item is wired with EU plugs. An adaptor is needed.




Image of item

£ 2,155.00 (ex. VAT) 1 in stock

Soxtec Avanti 2050 Auto Fat Extraction System with Drive Unit Lab

ITEM-24537

This Soxtec Avanti 2050 Auto Fat Extraction System was removed from a university lab where it was surplus to requirements.


Included are;


1 x Foss Tecator 2050 Soxtec Avanti Auto Extraction Unit

Part no. 10007330


1 x Foss Tecator 2050 Drive Unit

Part no. 10007338


The item powers on with the drive unit supplying power and controlling the extraction unit. It was not tested further. It seems to be missing a control unit.


The item is in reasonably good cosmetic condition with some marks from use.

Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 2,140.00 (ex. VAT) 1 in stock

Corbett CAS1200 Automated PCR Setup Robotic Precision Liquid Handling System

ITEM-36281

Corbett CAS1200 Automated PCR Setup Robotic Precision Liquid Handling System


This was removed from a university lab where it was surplus to requirements.


The system powers up and connects to the included Robotics 4 software. It has been tested to home the tip loader. The UV and fan functions also work.


It is in good cosmetic condition with marks from use.


The system consists of:


1 x CAS1200 Robot

SN - A080821


1 x Dell Optiplex 380 with Monitor, Keyboard & Mouse.

Has a fresh copy of Windows XP installed and Corbett Robotics 4 software.

All leads needed are included.

Image of item

£ 2,140.00 (ex. VAT) 1 in stock

ESCO Airstream Class 2 Biological Safety Cabinet AC2-458 Lab

ITEM-36884

This ESCO Airstream Class 2 Biological Safety Cabinet AC2-458 was removed from a university lab where it was surplus to requirements.


The unit powers up and is in full working order.


It is in good cosmetic condition with marks from use


Filter life left - 73%

UV life left - 99%


It comes with a frame/stand, height when assembled - 230cm

Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 2,140.00 (ex. VAT) 1 in stock

Corbett/Qiagen RG-6000 5 Plex HRM PCR System Lab

ITEM-31559

Corbett/Qiagen RG6000 5 Plex HRM PCR System


This was removed from a university lab where it was surplus to requirements.


The system powers up and communicates with the PC. It has been tested on a warm-up run.


It is in good cosmetic condition but has a small split in the lid, and the "running" LED doesn't work.


The system consists of:


1 x Corbett Research RG6000 5 Plex HRM.

S/N 020626.

With 72 well carousel & lock-ring.


1 x Dell Optiplex 380 PC with Monitor, Keyboard & Mouse

New install of Windows XP.

Qiagen Rotor-Gene Q 2.3.5 (Build 1) Software installed.



Image of item

£ 2,140.00 (ex. VAT) 1 in stock

Fluidigm Biomark HD Genetic Analyser & IFC Controller HX RT-PCR qPCR Lab

ITEM-18023

Fluidigm Biomark HD Genetic Analyser & IFC Controller HX with Accessories


This was removed from a university lab where it was surplus to requirements.


The units are all in good cosmetic condition with marks from use. Everything powers up. Starting up various programs did trigger the main unit to open its side door ready for a sample so it does appear that the PC and main unit are communicating. We have not run samples on the instrument but all tests and software appear to be running as expected.


Lot contains:

1 x Fluidigm Biomark HD Genetic Analyser.

1 x Fluidigm IFC Controller HX.

1 x Dell Monitor.

1 x VGA Cable.

1 x Logitech Keyboard.

1 x USB Male to USB Female Cable.

1 x 9 Pin Male to 9 Pin Female Serial Cable (Not VGA).


We logged into the IFC Controller HX successfully.

Settings on controller say:

Serial No: HX-10641.

Chips Supported: 136, 138, 139, 153, 154.

Filmware Version: 53

Software Version: 2.7-2014-12-02.

Last System Check: 19/11/2021.


The PC built inside the Biomark HD Genetic Analyser has had the user data removed but the software remains


Fluidigm Software:

Genetic Analysis.

BioMarkICP

EP1

BioMark.





Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 2,125.00 (ex. VAT) 1 in stock

Corbett CAS1200 Automated PCR Setup Robotic Precision Liquid Handling System

ITEM-36282



Corbett  CAS1200 Automated PCR Setup Robotic Precision Liquid Handling System


This was removed from a university lab where it was surplus to requirements.


The system powers up and connects to the included Robotics 4 software. It has been tested to home the tip loader. The UV and fan functions also work.


It is in good cosmetic condition with marks from use.


The system consists of:


1 x CAS1200 Robot

SN - A110618


1 x Dell Optiplex 380 with Monitor, Keyboard & Mouse.

Has a fresh copy of Windows XP installed and Corbett Robotics 4 software.

All leads needed are included.


Image of item

£ 2,115.00 (ex. VAT) 1 in stock

Biotage SP1 Flash Chromatography System Lab

ITEM-21097

This Biotage SP1 Flash Chromatography System was removed from a university lab where it was surplus to requirements.


The unit powers up but the monitor is faulty. We connected it to an external monitor and were able to power up the system and access the software. The battery for the motherboard with likely need replacing at some point.


The system is comprised of the following modules.


1 x Biotage SPXE 10810016;

1 x Ecom Fixed Wavelength UV Detector ;

1 x Biotage SP1 System & Monitor.



Image of item

£ 2,115.00 (ex. VAT) 1 in stock

Bruker Agena Bioscience Sequenom MT Analyser & MassARRAY NanoDispenser

ITEM-24384

Bruker Agena Bioscience  Sequenom MT Analyser & MassARRAY NanoDispenser


This system was removed from a university lab where it was surplus to requirements.


We have set the system up and everything powers up.


The MassARRAY NanoDispenser has been run in standalone mode as it has its own PC built-in. We have the passwords for the software. We have had the unit home its dispenser, it appears to respond to all commands.


After re-seating the Acqiris PCi card in the PC, we were able to start the Acqiris Live 2.4 program.


The main PC has the following software installed:

Acqiris Digitizer/AcqirisLive Version 2.4 Release 8 Build 0.

Acronis True Image.

Bruker Daltonics FLEXControl.

CMU 1394 Camera Demo.

MassARRAY Typer Version 4.0.

Plus a lot more.


We were unable to get the PC to communicate with the MT Analyser via the com port.


Included are;


1x Sequenom MT Analyser

Model MT9


1x MassARRAY NanoDispenser.


Accessories:

2x HP Monitors


1x LG PC

Model IPC-5120


Cables:

2x Male to Male VGA Cables

1x HP Male DVI to 2x Female VGA Cable


1x Mini gender changer Ribon cable 9 pin Male to 2x 9 pin Female cable


1x 9 pin Female to Female cable


1x D-SUB mixed contact connector to 3x BNC Cable.


1x TRIPP-LITE Compact Flexible Keyboard:


1x HP Keyboard


1x HP Mouse

Model no. M-SBJ96


1x Glass Flask

Volume: 3L


1x Allen Key

8MM





Image of item

£ 2,110.00 (ex. VAT) 1 in stock

Agilent 11974U Preselected Millimeter Mixer - RF Section Lab

ITEM-27935

This Agilent 11974U Preselected Millimeter Mixer was removed from a university lab where it was surplus to requirements.


The unit is in good cosmetic condition but has not been tested.


Accessories


1 x BNC cable

The unit is in good cosmetic condition.


1 x Adjustable Stand

The unit is in good cosmetic condition, there are some light tape marks from general use.

The stand can be moved 360º and adjusted up and down with a lock leaver. The lock lever is working.




Image of item

£ 2,110.00 (ex. VAT) 1 in stock

Antec Scientific Alexys 100 LC-EC System Lab - AC 100, LC 110, AS 100, LC 100

ITEM-25232



This Antec Scientific Alexys 100 LC-EC System was removed from a university lab where it was surplus to requirements.


All the modules power up but have not been tested further at our facility. It is in good cosmetic condition with only minor marks from use.


The lab informed us that it was working fine before it was put away about 5 years ago.


There are a number of consumables included with it.


The system includes;


1x LC 100

Part No. 182.0035


1x AC 100

Part No. 183.0035


1x LC 110

Part No. 193.0035


1x AS 100

Part No. 181.0037


1x Decade II

Part No. 171.0035


1x OPR

Part No. 184.0035

Image of item

RECERTIFIED ITEM

RECERTIFIED ITEM

£ 2,110.00 (ex. VAT) 1 in stock

LTE Scientific Falcon 30 Benchtop Laboratory Autoclave Lab

ITEM-31288

This LTE Scientific Falcon 30 Benchtop Laboratory Autoclave was removed from a university lab where it was surplus to requirements.


The unit has been professionally serviced and is in full working order. It has passed all safety checks. Full report available on request.


It is in overall good cosmetic condition but does have marks and stains from use.


Internal Dimensions - 42 x 22 x 27 cm

Image of item

£ 2,105.00 (ex. VAT) 1 in stock

Orbit Marine AL-7108-CCU Central Control Unit PN - L00120002 Lab

ITEM-30589

This Orbit Marine AL-7108-CCU Central Control Unit was removed from a university lab where it was surplus to requirements.


The item powers on and boots up with Orbit Marine tracking system software Version 4.84 10.12.2012 installed. It was tested with an external monitor (not included). The front panel is not a display screen.


It is in good cosmetic condition with marks from use.

Items 361 to 380 of 3041

Filters

Price (£)

to

Condition