This was removed from a university lab where it was surplus to requirements.

This SEM was acquired and installed in 2007, it is a high-resolution microscope which operates in conventional high vacuum and low vacuum modes. Low vacuum mode allows the observation of non-conducting, uncoated samples. It also has a Gatan Alto 2100 Cryo System for cryo-fixed samples and freeze-fracture work.

The lab confirmed that the microscope is fully functional (including the cryo-set up).

1. Resolution: 3.0nm at 30Kv and 15nm at 1Kv.
2. Accelerating voltage range: 0.5Kv – 30Kv
3. Magnification range: x5 to x300,00
4. Imaging modes: Secondary electron (SE), Backscattered electron (BSE)
5. Specimen size: 150mm x 45mm
6. Specimen stage: Eucentric stage axis motorization.
7. Fully automated filament heating and alignment.

This Jeol JSM-5910LV SEM Scanning Electron Microscope was removed from a university lab where it was surplus to requirements.

The system has not been tested. The Oxford dewar has come away from the unit and dented on the floor.

The system is in otherwise good cosmetic condition with minor marks from use.

It has two PCs which contain software for the system.

It is accompanied by

2 x  ULVAC G-100DB Pumps

1 x PC MP-59100LBU/Operation Desk

1 x Side desk with NEC monitor - The monitor is operational

1 x Inca mics & x-stream

1 x HP Computer with INCA Energy software for the INCA units.

1 x White Dell OptiPlex with Software for the SEM

1 x Jeol MP-59100LBU

1 x Deben Coolstage unit JSM-6610LV - Comes with a controller (JSM_5600). Good condition.

This Hitachi H600 Transmission Electron Microscope was removed from a university lab where it was no longer needed.

It has not been tested but it is in reasonably good condition. It has been completely disassembled for removal.

If you would like images of it in its current state, we would be happy to provide these.

This Edwards E306A Thermal Evaporator Coating System was removed from a university lab where it was surplus to requirements.

The system powers up but we were unable to test it further at our facility.

It is made up of the following modules;

1 x Edwards No.8 High Vacuum Pump Model E2M8.

1 x Edwards PR10-K.

1 x Edwards Vacuum Switch Type VSK 1.B.

1 x Edwards Vapour Pump Model EO4.

It is in good cosmetic condition but has marks from use.

No key supplied with the Item for the bottom panels.

Leica MZ95 Microscope System & K Systems IVF Workstation  L224 LAF

The system has been tested and all modules are in full working order.

Everything is in good cosmetic condition with minor marks from use.

Included are;

K Systems IVF Workstation

Type - L224 LAF

SN - 11100161

Internal workspace - L122 W50 H71cm

Heating function is working.

Microscope:-

Leica MZ95

2 x Leica Eye Pieces 10x/21B (10447160)

Leica Plan 1.0x (10446275)

K Systems Lamp (fitted underneath)

Type - LS14

SN - 11010194

RI IVF Witness Heated Control Unit

SN - 862

RI IVF Witness Box with cables and stand

This Molecular Devices ImageXpress Micro System was removed from a university lab where it was surplus to requirements.

All units are in good used cosmetic condition. The system was removed from a university lab as surplus to requirements. We had an engineer assess the system and they informed us it was in full working order.

The system consists of:

1 x Molecular Devices ImageXpress Micro.

The unit is fitted with the Transmitted Light Option.

It also comes with the ImageXpress Micro Options controller (Environmental Controller) and the dedicated power supply.

The unit comes with the following objectives in a Black Peli case.

1 x Nikon Plan UW

1X/0.04

∞/- WD 3.2

1 x Nikon Plan Fluor

10X/0.30

DIC L/N1

∞/0.17 WD 16

1 x Nikon S Plan Fluor

WLWD 20X/0.45

Ph1 ADM

1 x Nikon Plan Fluor

10X/0.30

Ph1 DL

∞/1.2 WD 15.2

1 x Nikon S Fluor

4X/0.20

∞/- WD. 15.5

1 x Nikon Plan Apo

2X/0.10

∞/- WD 8.5

Also included in the system:

1 x Sutter Instruments Xeon Lamp unit with liquid light guide.

Also comes with manual and a spare used/unknown bulb.

1 x PAA Robot with power supply.

1 x Thermo Cytomat.

The unit is working but the key is snapped off in the main lock. The switch has been set to the on position.

2 x PC's with monitors:

1 (Dell) is the original unit that no longer contains any relevant software.

The other (Stone) was originally being used with the system but without a monitor.

It contains the ImageXpress software (3.1.0.97) that controls the Micro unit.

1 monitor appears to be faulty, the other works fine.

1 x Molecular Devices software box that contain various software and a pair of dongles for the PC.

1 x Black Peli Case that houses the objectives, test slide etc.

1 x Box containing all the connector cables.

2 x Pieces of ducting for the environmental control and the exit of the Xeon lamp.

2 x Slide stands.

The system has been fully checked by a Molecular Devices engineer. It was reported as being in good working order.

If the buyer wished we are able to remove the Transmitted Light & Environmental Control option. We are also able to alter the configuration of the system. ie, remove the PAA robot/Cytomat etc.

The MetaXpress PC is was used by the engineer to perform the checks on the system.

We are able to supply the full engineer report on the ImageXpress Micro unit.

It might also be possible for us to offer a full installation package, training and other services with the system (for an additional charge). Please enquire for more details.

This BD FACSCanto II Cell Sorter w/ Fluidics Cart & PC was removed from a university lab where it was surplus to requirements.

The unit has been tested by a qualified service technician. The unit powers up and communicates with the PC using the supplies FACSDiva software. A message "HTS Sampler Coupler Not Attached" appeared but when they pressed ok, the fluidics started up and it runs as normal.

The HTS sampler looks like it has had some historic leaks inside. We were unable to get it to communicate.

Included are;

BD FACSCanto II Flow Cytometer

BD FACSCanto II Fluidics Cart

Waste Bottle

Shutdown Solution

Decontamination Solution

PC - HP xw4600 Workstation

Monitor - NEC MultiSync LCD2490WUXi 24"

HP Keyboard & Mouse

Applications;

FCAP Array V1.0.1

BD FACSDiva Software V.6.1.3

BD FACSCanto

BD FACS Data Manager

The item also comes with:-

BD FACSCanto II Training Manual

BD FACSCanto II Information Pack

ModFit LT Flow Cytometry Modeling Software 3.0

Pack of Sarstedt 13ml Tubes (Pack almost full - 250 in a full pack)

Tubing & Cables

Manuals/Guides & Software:-

BD Biosciences Software Users Guide

Norton Ghost 14.0

BD Application Handbook 2nd Edition

FCAP Array Software V1.0.1 (Guide,CD & Dongle)

BD FACSCanto II Instructions for use

BD HTS Customer Care Kits Users guide

BD High Throughput Sampler User Guide

BD Cytometer Set up & Tracking Application Guide

BD Getting Started Guide with BD FACSDiva Software

BD FACSCanto Safety & Limitations

BD High Throughput Sampler Safety & Limitations

FACS Academy Flow Cytometry & Immunology Basics Vol.1

2 x FACSCAN Boards

Radleys RS50 Reactor Ready Lab Reaction System with Huber Unistat 405

This was removed from a university lab where it was surplus to requirements.

The system powers up but has not been tested. The system was working when last used in 2019.

Parts include:-

Radleys RS50 Control

Cat no. RR91308

SN - 021201979

Powers on with speed up to 2000rpm

Radleys 5000ml Single Jacketed Vessel (Boxed)

Cat no. RR135000

Radleys condenser

Stand and fittings all come boxed.

Dimensions when set up - L58 W47 H108cm

Huber Unistat 405

SN - 136512/11

Powers on

Dimensions - L40 W51 64cm

Dell PC - No software installed on it, but we have left it with the system as it was supplied with it.

Radleys Control Software Version V2.3.3.0 Disc & Dongle

Netgear Prosafe 5 Port 10/100 Switch FS105 w/power supply - Powers on

2 x Radleys Data Hubs (Cat - RR20200) w/power supplies - Both power on

Ethernet/RS232 Cables

Radleys Ready Maintenance Kit

Bag of Red/Yellow Caps

2 x Watson Marlow Pump heads

Picarro Cavity Ringdown Isotopic CO2 Spectrophotometer G1101-i & GSP-1000 PSU

This was removed from a university lab where it was surplus to requirements.

This System includes;

1x Picarro Cavity Ringdown Isotopic CO2 Spectrophotometer G1101-i

Mod No. ESP-1000 DAS

The unit powers on and is in good cosmetic condition.

1 x Power Supply/PC

Mod No. ESP-1000

The unit powers on, it communicates with the CO2 Spectrophotometer and is in good cosmetic condition.

Accessories included

1x Keyboard

1x Mouse

1x Communication cable

We connected up a monitor (not included) and launched the program with success. The system was not tested further. The software is for Isotropic Carbon Dioxide Monitoring.

Picarro Cavity Ringdown Isotopic Methane Spectrophotometer G1112-i - ESP -1000

This was removed from a university lab where it was surplus to requirements.

This System includes;

1x Picarro Cavity Ringdown Isotopic Methane Spectrophotometer G1112-i

Mod No. ESP-1000 DAS

The unit powers on and is in good cosmetic condition.

1 x Power Supply/PC

Mod No. ESP-1000

The unit powers on, communicates with the Spectrophotometer and is in good cosmetic condition.

We connected up a monitor (not included) and launched the program with success. The system was not tested further. The software is for Isotropic Methane Monitoring.

This JEOL JEM2011 is being sold on behalf of a university lab where it was surplus to requirements.

The system is still under vacuum and is nominally functional, though it hasn't been used in a couple of years. The scintillator in the Gatan Multiscan Camera is coming to the end of its life and the Oxford EDX system has not been used in a very long time as the lab was unable to source a PC with the right connectors to support it.

The system has now been decommissioned by JEOL and is ready for collection in Fife, Scotland.

1. JEOL JEM2011 transmission electron microscope, 200 kV operation, LaB6 or W filament
2. Oxford INCAx-sight/Oxford Link ISIS EDX system
3. Gatan Multiscan 794 CCD camera, 1024 x 1024 pix
4. Varicon De Vere 504 enlarger

This is being sold on behalf of a client. It is surplus to requirements.

The MicroBeta TriLux is an instrument designed for liquid scintillation or luminescence detection of samples in microplates, tubes or on filters. This system has 12 detectors and is set up for 96/384 well plates and a 16-shelf plate-loading magazine

It has been refurbished by Factory trained Engineers to the original instrument specification.

Included with it are;

3 months UK Warranty

12 Detectors

USB upgrade

Windows 10 upgrade.

PC Monitor

Life Sciences QD12844R1 Laboratory Cleanroom

This is being sold on behalf of a client. It is surplus to requirements.

It had a visit from an engineer in 2021, where it had new filters installed. It hasn't been used since it may need new filters again if there has been a build-up of dust. It was in full working order prior to not being used. It is in excellent cosmetic condition and has hardly been used.

We have the Engineer's Validation report for it from 2021 available on request if you would like to see it.

Beckman Coulter Biomek FX Robotic Automated Liquid Handling System

This was removed from a university lab where it was surplus to requirements.

The unit has been tested and is in good working order. The tiploader has been tested with a jun-air compressor which is not included in the sale.

The system includes a Dell Optiplex 380 running Windows XP. It has various software installed including Beckman Coulter Biomek 3.3 (Build 14)

This allows control of the Biomek FX robot. The other PC contains no Biomek software. The SATA HDD contains an old version of the Biomek software running on Windows NT.

Also Included with it are;

Stone PC - No software

Boxed Hard Drive

NEC 19" Monitor

Microsoft Keyboard

HP Mouse

Beckman Coulter Integrated Solutions CD

This Perkin Elmer Pyris 1 Differential Scanning Calorimeter System was removed from a university lab where it was surplus to requirements.

The unit has been inspected and fully tested by a qualified engineer. It was confirmed to be in full working order.

Included with it are;

1 x Perkin Elmer Differential Scanning Calorimeter - Pyris 1

Part no. N537-0050

1 x Dell Optiplex PC (SN-MQ4ZP) With PYRIS 1 SOFTWARE

1 x Microsoft Mouse

1 x Dell Keyboard Model - AT102W (SN-M9801-22017)

1 x Norgren Gas Regulator

1 x Perkin Elmer Pyris 1 Spares Kit (Wooden box)

3 x Perkin Elmer cases with small parts

1 x Perkin Elmer Hammer accessory

1 x Thermometer on stand

Everything is in reasonably good cosmetic condition with some marks from age and use.

This CrytstalMation Rigaku Minstrel HT & Gallery 700 Incubator System was removed from a university lab where it was surplus to requirements.

The lab retained the "phoenix" unit and the image server PC as well as the software. It was reported as otherwise fully working.

Included in the system are;

1 x Middle PC Unit:-

Model - Minstrel HT PC/Monitor

1 x Model - Minstrel HT CCU

Hours -573282

1 x Dell Power Connect 2708

Dell PC - The unit powers on and has Minstrel & Robot Programs

2 x Model - Gallery 700 Incubators

Both the units power up.

Everything powers up but the system has not been tested, the incubators need to be connected to the PC unit to be operated. Everything looks to be in good, used cosmetic condition.

The manuals are included.

DigiLab Pro Prep II Protein Digestion & Mass Spec Preparation Station 2  

This was removed from a university lab where it was surplus to requirements.

At our facility we were only able to power it up, but we are told it was in full working order prior to removal. The only issues is that the gas struts have failed.

It is in excellent cosmetic condition with hardly any marks from use.

There are various accessories included.

This Huber Unistat 380W Refrigerated Heating Circulator was removed from a university lab where it was surplus to requirements.

The unit powers on and is in good cosmetic condition. Both digital displays are working and display clearly. All buttons appear to be responsive to the unit.

BE: Version 3.7